BBS designs
Supreme Member
iTrader: (1)
Joined: Mar 2001
Posts: 1,100
Likes: 0
From: In the corner of my mind!
Car: 1989 TTA #1240
Engine: 3.8 SFI turbo
Transmission: 2004r
Axle/Gears: 3.27
I think a gp on the header/ headers only would be better as opposed to a complete kit. That way we could get them the work and people wouldn't have to crunch themselves financially to get into the turbo game. I myself will be using a different turbo and drivers side header.
Some guys may find other turbos easier/cheaper or piece together the rest of their project as they see fit. At this point at least they could grab the header before it discontinues even if they don't ever complete it just to keep the money flowing in the right direction to keep BBS in the mix.
HTH! spark the interest.........
Some guys may find other turbos easier/cheaper or piece together the rest of their project as they see fit. At this point at least they could grab the header before it discontinues even if they don't ever complete it just to keep the money flowing in the right direction to keep BBS in the mix.
HTH! spark the interest.........
Joined: Feb 2000
Posts: 1,855
Likes: 13
From: St. Augustine, FL
Car: 89 GTA
Engine: 383
Transmission: 4L80E
Axle/Gears: 12 bolt-3.73
1.) Dan (Metalhead212121) <--interested in twin turbo setup.. OR twin turbo headers..
2.)Jeremy(aka 3.8TransAM)=single turbo setup with AC and serpentine, headers/downpipe elbow only
3.)PETE (interested in single turbo header only(can pay today), in case my crap cracks )
4.)BJ (89gta383)=interested in single turbo or twin turbo serpentine kit minus turbo(need to do more research on what I need)
5.)
6.)
7.)
8.)
9.)
10.)
11.)
12.)
13.)
14.)
15.)
2.)Jeremy(aka 3.8TransAM)=single turbo setup with AC and serpentine, headers/downpipe elbow only
3.)PETE (interested in single turbo header only(can pay today), in case my crap cracks )
4.)BJ (89gta383)=interested in single turbo or twin turbo serpentine kit minus turbo(need to do more research on what I need)
5.)
6.)
7.)
8.)
9.)
10.)
11.)
12.)
13.)
14.)
15.)
Junior Member
Joined: Aug 2005
Posts: 5
Likes: 0
Just for the record I contacted ssautochrome inquiring about a single turbo header or complete kit for our thirdgens. Their response was that they have no such system. When I informed them of this post and its' contents all they had to say about it was that it was hilarious.
Member
iTrader: (1)
Joined: Oct 2005
Posts: 245
Likes: 1
From: Troy, Ohio
Car: 1987 Trans Am
Engine: 383
Transmission: TH400
Axle/Gears: 9 bolt 4.11
Originally Posted by BBSDesigns
Hello everyone. For those of you asking about our kits and stuff, yes we are discontinuing them. We already got sold out our last parts we had on stock, but we are keeping the jigs and some flanges around for our personal projects.
The reason; SS Autochrome. Someone bought our kit as you all know send it China or God knows where and copied. They are now making exact cheap copies of our sweated and hard devloped kit. The sorry thing is that they are making it them so dam nice looking that anyone could be fooled and get hooked by the looks "wow, stainless steel", and any buyer will get a show quality setup, but just that and only that. I bet that those headers will crack like fresh soda crackers after a while of use, but the sad thing is that they are so cheap and good looking that anyone will be tempted and fooled by these copies.
The solution; we will not work our ____ out to develop any more kits for them to copy. We are also a stainless steel sheet metal fabricators for the pharmaceutical industry so we are going to concentrate more on that area.
The sad thing; Those of you who wanted to get a good quality and long lasting kit, but since we dont know how differ the true buyer from the China spy, we discontinued the kits. We are still offering other parts but no headers and or kits.
Off topic;
fireturd350: We got your email, the headers and turbos will be coated by Friday, shipping will take place next week.
Here is a pic of the current project; Turbo4
The reason; SS Autochrome. Someone bought our kit as you all know send it China or God knows where and copied. They are now making exact cheap copies of our sweated and hard devloped kit. The sorry thing is that they are making it them so dam nice looking that anyone could be fooled and get hooked by the looks "wow, stainless steel", and any buyer will get a show quality setup, but just that and only that. I bet that those headers will crack like fresh soda crackers after a while of use, but the sad thing is that they are so cheap and good looking that anyone will be tempted and fooled by these copies.
The solution; we will not work our ____ out to develop any more kits for them to copy. We are also a stainless steel sheet metal fabricators for the pharmaceutical industry so we are going to concentrate more on that area.
The sad thing; Those of you who wanted to get a good quality and long lasting kit, but since we dont know how differ the true buyer from the China spy, we discontinued the kits. We are still offering other parts but no headers and or kits.
Off topic;
fireturd350: We got your email, the headers and turbos will be coated by Friday, shipping will take place next week.
Here is a pic of the current project; Turbo4
geez I'm glad I got mine when I did....I emailed you as soon as I saw the ssautocrap but I didnt think you would discontinue making your quality pieces. Sorry to hear that.
Member
Joined: Dec 2003
Posts: 441
Likes: 1
From: Suffield, CT
Car: Looking
1.) Dan (Metalhead212121) <--interested in twin turbo setup.. OR twin turbo headers..
2.)Jeremy(aka 3.8TransAM)=single turbo setup with AC and serpentine, headers/downpipe elbow only
3.)PETE (interested in single turbo header only(can pay today), in case my crap cracks )
4.)BJ (89gta383)=interested in single turbo or twin turbo serpentine kit minus turbo(need to do more research on what I need)
5.) Justin (Red91CamaroRS) - Interested in a single turbo, serp. set up WITH A/C - if a deal is worked out, pricing is a HUGE factor.
6.)
7.)
8.)
9.)
10.)
11.)
12.)
13.)
14.)
15.)
2.)Jeremy(aka 3.8TransAM)=single turbo setup with AC and serpentine, headers/downpipe elbow only
3.)PETE (interested in single turbo header only(can pay today), in case my crap cracks )
4.)BJ (89gta383)=interested in single turbo or twin turbo serpentine kit minus turbo(need to do more research on what I need)
5.) Justin (Red91CamaroRS) - Interested in a single turbo, serp. set up WITH A/C - if a deal is worked out, pricing is a HUGE factor.
6.)
7.)
8.)
9.)
10.)
11.)
12.)
13.)
14.)
15.)
Supreme Member
Joined: Sep 2003
Posts: 1,408
Likes: 2
From: Western Maryland
Car: 82z28
Engine: 406
Transmission: th350
Axle/Gears: 3.23
Single turbo header only may interest me. Either way it would be nice if BBS kept their header jigs and maybe just marketed the headers by themself, believe it or not their are still people out there that will pay for quality work.
Member
iTrader: (1)
Joined: Feb 2006
Posts: 364
Likes: 0
From: canada, eh
Car: 1987 Z28 camaro
Engine: 305 V8
Transmission: auto
Axle/Gears: 10 bolt pozi
1.) Dan (Metalhead212121) <--interested in twin turbo setup.. OR twin turbo headers..
2.)Jeremy(aka 3.8TransAM)=single turbo setup with AC and serpentine, headers/downpipe elbow only
3.)PETE (interested in single turbo header only(can pay today), in case my crap cracks )
4.)BJ (89gta383)=interested in single turbo or twin turbo serpentine kit minus turbo(need to do more research on what I need)
5.) Justin (Red91CamaroRS) - Interested in a single turbo, serp. set up WITH A/C - if a deal is worked out, pricing is a HUGE factor.
6.) carter- twin turbo kit or just the headers. (if this goes through I will get the money for them.)
7.)
8.)
9.)
10.)
11.)
12.)
13.)
14.)
15.)
2.)Jeremy(aka 3.8TransAM)=single turbo setup with AC and serpentine, headers/downpipe elbow only
3.)PETE (interested in single turbo header only(can pay today), in case my crap cracks )
4.)BJ (89gta383)=interested in single turbo or twin turbo serpentine kit minus turbo(need to do more research on what I need)
5.) Justin (Red91CamaroRS) - Interested in a single turbo, serp. set up WITH A/C - if a deal is worked out, pricing is a HUGE factor.
6.) carter- twin turbo kit or just the headers. (if this goes through I will get the money for them.)
7.)
8.)
9.)
10.)
11.)
12.)
13.)
14.)
15.)
Last edited by CarterCarbureto; May 1, 2006 at 05:52 PM.
Member
Joined: Jan 2006
Posts: 161
Likes: 0
From: Camp Lejeune, NC
Car: 83' Camaro
Engine: 355
Transmission: TH-350
Axle/Gears: Open...
1.) Dan (Metalhead212121) <--interested in twin turbo setup.. OR twin turbo headers..
2.)Jeremy(aka 3.8TransAM)=single turbo setup with AC and serpentine, headers/downpipe elbow only
3.)PETE (interested in single turbo header only(can pay today), in case my crap cracks )
4.)BJ (89gta383)=interested in single turbo or twin turbo serpentine kit minus turbo(need to do more research on what I need)
5.) Justin (Red91CamaroRS) - Interested in a single turbo, serp. set up WITH A/C - if a deal is worked out, pricing is a HUGE factor.
6.) carter- twin turbo kit or just the headers. (if this goes through I will get the money for them.)
7.)Ray(Ray102386) Single turbo header w/AC & Serpentine, turbo later.
8.)
9.)
10.)
11.)
12.)
13.)
14.)
15.)
2.)Jeremy(aka 3.8TransAM)=single turbo setup with AC and serpentine, headers/downpipe elbow only
3.)PETE (interested in single turbo header only(can pay today), in case my crap cracks )
4.)BJ (89gta383)=interested in single turbo or twin turbo serpentine kit minus turbo(need to do more research on what I need)
5.) Justin (Red91CamaroRS) - Interested in a single turbo, serp. set up WITH A/C - if a deal is worked out, pricing is a HUGE factor.
6.) carter- twin turbo kit or just the headers. (if this goes through I will get the money for them.)
7.)Ray(Ray102386) Single turbo header w/AC & Serpentine, turbo later.
8.)
9.)
10.)
11.)
12.)
13.)
14.)
15.)
Junior Member
iTrader: (3)
Joined: Apr 2006
Posts: 9
Likes: 0
From: Texas
Car: CandyRed 87 Iroc
Engine: 6.0 LS1
Transmission: 700R4
Axle/Gears: 3.73
1.) Dan (Metalhead212121) <--interested in twin turbo setup.. OR twin turbo headers..
2.)Jeremy(aka 3.8TransAM)=single turbo setup with AC and serpentine, headers/downpipe elbow only
3.)PETE (interested in single turbo header only(can pay today), in case my crap cracks )
4.)BJ (89gta383)=interested in single turbo or twin turbo serpentine kit minus turbo(need to do more research on what I need)
5.) Justin (Red91CamaroRS) - Interested in a single turbo, serp. set up WITH A/C - if a deal is worked out, pricing is a HUGE factor.
6.) carter- twin turbo kit or just the headers. (if this goes through I will get the money for them.)
7.)Ray(Ray102386) Single turbo header w/AC & Serpentine, turbo later.
8.)Jason(VenomCamaro) Single turbo kit or just the headers and intake tube.
9.)
10.)
11.)
12.)
13.)
14.)
15.)
2.)Jeremy(aka 3.8TransAM)=single turbo setup with AC and serpentine, headers/downpipe elbow only
3.)PETE (interested in single turbo header only(can pay today), in case my crap cracks )
4.)BJ (89gta383)=interested in single turbo or twin turbo serpentine kit minus turbo(need to do more research on what I need)
5.) Justin (Red91CamaroRS) - Interested in a single turbo, serp. set up WITH A/C - if a deal is worked out, pricing is a HUGE factor.
6.) carter- twin turbo kit or just the headers. (if this goes through I will get the money for them.)
7.)Ray(Ray102386) Single turbo header w/AC & Serpentine, turbo later.
8.)Jason(VenomCamaro) Single turbo kit or just the headers and intake tube.
9.)
10.)
11.)
12.)
13.)
14.)
15.)
Member
Joined: Jan 2006
Posts: 161
Likes: 0
From: Camp Lejeune, NC
Car: 83' Camaro
Engine: 355
Transmission: TH-350
Axle/Gears: Open...
Im hopin they give us some D**N good prices too, this is a big chunk of money that they will be gettin if they follow through with this.
Member
iTrader: (1)
Joined: Feb 2006
Posts: 364
Likes: 0
From: canada, eh
Car: 1987 Z28 camaro
Engine: 305 V8
Transmission: auto
Axle/Gears: 10 bolt pozi
edit:
1.) Dan (Metalhead212121) <--interested in twin turbo setup.. OR twin turbo headers..
2.)Jeremy(aka 3.8TransAM)=single turbo setup with AC and serpentine, headers/downpipe elbow only
3.)PETE (interested in single turbo header only(can pay today), in case my crap cracks )
4.)BJ (89gta383)=interested in single turbo or twin turbo serpentine kit minus turbo(need to do more research on what I need)
5.) Justin (Red91CamaroRS) - Interested in a single turbo, serp. set up WITH A/C - if a deal is worked out, pricing is a HUGE factor.
6.) carter- twin turbo racing kit, or just the headers. (if this goes through I will get the money for them.)
7.)Ray(Ray102386) Single turbo header w/AC & Serpentine, turbo later.
8.)Jason(VenomCamaro) Single turbo kit or just the headers and intake tube.
9.)
10.)
11.)
12.)
13.)
14.)
15.)
1.) Dan (Metalhead212121) <--interested in twin turbo setup.. OR twin turbo headers..
2.)Jeremy(aka 3.8TransAM)=single turbo setup with AC and serpentine, headers/downpipe elbow only
3.)PETE (interested in single turbo header only(can pay today), in case my crap cracks )
4.)BJ (89gta383)=interested in single turbo or twin turbo serpentine kit minus turbo(need to do more research on what I need)
5.) Justin (Red91CamaroRS) - Interested in a single turbo, serp. set up WITH A/C - if a deal is worked out, pricing is a HUGE factor.
6.) carter- twin turbo racing kit, or just the headers. (if this goes through I will get the money for them.)
7.)Ray(Ray102386) Single turbo header w/AC & Serpentine, turbo later.
8.)Jason(VenomCamaro) Single turbo kit or just the headers and intake tube.
9.)
10.)
11.)
12.)
13.)
14.)
15.)
Senior Member
Joined: Apr 2002
Posts: 531
Likes: 0
From: Northern New Jersey
Car: 91 Firebird Formula
Engine: For me to know.....
Transmission: and you to find out....
Originally Posted by Ray102386
Im hopin they give us some D**N good prices too, this is a big chunk of money that they will be gettin if they follow through with this.
Just remember... its a BIG IF... In case any of you HAVE NOT read this whole thread from start to finish this is list of people interested in a POSSIBLE GROUP PURCHASE for a single turbo, twin turbo, or turbo header(s) purchase. I would like to email Edwardo(?) at BBS Designs with a list of people that are 100% willing to pay for his products.. Id hate for him to see this thread and then have people back out at the last second.. Thanks..
Dan
Member
iTrader: (2)
Joined: Mar 2005
Posts: 499
Likes: 0
From: Schaumburg, Il
Car: 1987 Trans am
Engine: Cammin Ls1
Transmission: Th400 w/brake 5500 stall
Axle/Gears: Moser 9" w/ 4.11's
1.) Dan (Metalhead212121) <--interested in twin turbo setup.. OR twin turbo headers..
2.)Jeremy(aka 3.8TransAM)=single turbo setup with AC and serpentine, headers/downpipe elbow only
3.)PETE (interested in single turbo header only(can pay today), in case my crap cracks )
4.)BJ (89gta383)=interested in single turbo or twin turbo serpentine kit minus turbo(need to do more research on what I need)
5.) Justin (Red91CamaroRS) - Interested in a single turbo, serp. set up WITH A/C - if a deal is worked out, pricing is a HUGE factor.
6.) carter- twin turbo racing kit, or just the headers. (if this goes through I will get the money for them.)
7.)Ray(Ray102386) Single turbo header w/AC & Serpentine, turbo later.
8.)Jason(VenomCamaro) Single turbo kit or just the headers and intake tube.
9.)Tim(smokin87ta) Single turbo header, no a/c or anything to worry about.
10.)
11.)
12.)
13.)
14.)
15.)
I am in as long as the price is good and its not the whole kit because i already have the turbo and wastegate.
2.)Jeremy(aka 3.8TransAM)=single turbo setup with AC and serpentine, headers/downpipe elbow only
3.)PETE (interested in single turbo header only(can pay today), in case my crap cracks )
4.)BJ (89gta383)=interested in single turbo or twin turbo serpentine kit minus turbo(need to do more research on what I need)
5.) Justin (Red91CamaroRS) - Interested in a single turbo, serp. set up WITH A/C - if a deal is worked out, pricing is a HUGE factor.
6.) carter- twin turbo racing kit, or just the headers. (if this goes through I will get the money for them.)
7.)Ray(Ray102386) Single turbo header w/AC & Serpentine, turbo later.
8.)Jason(VenomCamaro) Single turbo kit or just the headers and intake tube.
9.)Tim(smokin87ta) Single turbo header, no a/c or anything to worry about.
10.)
11.)
12.)
13.)
14.)
15.)
I am in as long as the price is good and its not the whole kit because i already have the turbo and wastegate.
Joined: Sep 2005
Posts: 1,127
Likes: 58
From: PA
Car: 92 camaro RS
Engine: LSA
Transmission: Magnum F
Axle/Gears: TNT 8.8 wavetrac 3.31
i would like to know if its going to be a sure thing i would like to have the single race kit but it needs to be able to clear my tall valve covers i emailed him before about this he said it wouldn't be a problem to make the changes
Senior Member
Joined: Apr 2002
Posts: 531
Likes: 0
From: Northern New Jersey
Car: 91 Firebird Formula
Engine: For me to know.....
Transmission: and you to find out....
Originally Posted by obeymybird
i would like to know if its going to be a sure thing i would like to have the single race kit but it needs to be able to clear my tall valve covers i emailed him before about this he said it wouldn't be a problem to make the changes
You guys know as much as I know..
I really thought we were gonna get more people in on a possible group purchase.. I'll give it a day or two and I'll talk to BBS designs show him this thread.. ect ect. I was hoping they'd see this thread and respond. Cross your fingers..Dan
Member
Joined: Apr 2004
Posts: 380
Likes: 0
From: San Antonio Texas
Car: '91 Camaro
Engine: Mild 283
Transmission: TH400
TexasDude74: I think I saw one of their turbo headers on ebay. Regardless of who copied who... there's only a few ways you can make a turbo header. People are going to who's cheaper.. if SSA fixes their welds, why not use that product if it will save you $500 or more? not that I care.. mine are one-offs fabbed locally.
Member
Joined: Apr 2004
Posts: 467
Likes: 1
From: on the street
Car: 92 Formula 350
Engine: L98 with a T-76
Transmission: ArtCarr 700-R4
Axle/Gears: Bone stock 10bolt and 3.23's
BBS, i just saw this, that really sucks. For everyone else, i have just BBS's single turbo header. (probubly the first header he sold) I have had the header on my car for 3 yrs now. Not one crack. No problems at all with it and not to be full of myself, but i'd say that the header is designed pretty good by the results of my car.
Senior Member
Joined: Aug 2005
Posts: 767
Likes: 0
From: Connecticut
Car: 2005 Lincoln LS, 83' Z28
Engine: 242 DOHC and an empty engine bay.
Transmission: 5R55S, T5 soon to be auto
Axle/Gears: 3.58s and soon to be 4.10s
Re: BBS designs
1.) Dan (Metalhead212121) <--interested in twin turbo setup.. OR twin turbo headers..
2.)Jeremy(aka 3.8TransAM)=single turbo setup with AC and serpentine, headers/downpipe elbow only
3.)PETE (interested in single turbo header only(can pay today), in case my crap cracks )
4.)BJ (89gta383)=interested in single turbo or twin turbo serpentine kit minus turbo(need to do more research on what I need)
5.) Justin (Red91CamaroRS) - Interested in a single turbo, serp. set up WITH A/C - if a deal is worked out, pricing is a HUGE factor.
6.) carter- twin turbo racing kit, or just the headers. (if this goes through I will get the money for them.)
7.)Ray(Ray102386) Single turbo header w/AC & Serpentine, turbo later.
8.)Jason(VenomCamaro) Single turbo kit or just the headers and intake tube.
9.)Tim(smokin87ta) Single turbo header, no a/c or anything to worry about.
10.)Baron(69charger383) Single turbo header, no a/c or anything, cash in hand..
11.)
12.)
13.)
14.)
15.)
2.)Jeremy(aka 3.8TransAM)=single turbo setup with AC and serpentine, headers/downpipe elbow only
3.)PETE (interested in single turbo header only(can pay today), in case my crap cracks )
4.)BJ (89gta383)=interested in single turbo or twin turbo serpentine kit minus turbo(need to do more research on what I need)
5.) Justin (Red91CamaroRS) - Interested in a single turbo, serp. set up WITH A/C - if a deal is worked out, pricing is a HUGE factor.
6.) carter- twin turbo racing kit, or just the headers. (if this goes through I will get the money for them.)
7.)Ray(Ray102386) Single turbo header w/AC & Serpentine, turbo later.
8.)Jason(VenomCamaro) Single turbo kit or just the headers and intake tube.
9.)Tim(smokin87ta) Single turbo header, no a/c or anything to worry about.
10.)Baron(69charger383) Single turbo header, no a/c or anything, cash in hand..
11.)
12.)
13.)
14.)
15.)
Member
Joined: Jan 2006
Posts: 161
Likes: 0
From: Camp Lejeune, NC
Car: 83' Camaro
Engine: 355
Transmission: TH-350
Axle/Gears: Open...
Re: BBS designs
1.) Dan (Metalhead212121) <--interested in twin turbo setup.. OR twin turbo headers..
2.)Jeremy(aka 3.8TransAM)=single turbo setup with AC and serpentine, headers/downpipe elbow only
3.)PETE (interested in single turbo header only(can pay today), in case my crap cracks )
4.)BJ (89gta383)=interested in single turbo or twin turbo serpentine kit minus turbo(need to do more research on what I need)
5.) Justin (Red91CamaroRS) - Interested in a single turbo, serp. set up WITH A/C - if a deal is worked out, pricing is a HUGE factor.
6.) carter- twin turbo racing kit, or just the headers. (if this goes through I will get the money for them.)
7.)Ray(Ray102386) RACE TWIN TURBO headers or complete system. Deployment is payin for it all
IRAQ
8.)Jason(VenomCamaro) Single turbo kit or just the headers and intake tube.
9.)Tim(smokin87ta) Single turbo header, no a/c or anything to worry about.
10.)Baron(69charger383) Single turbo header, no a/c or anything, cash in hand..
11.)
12.)
13.)
14.)
15.)
2.)Jeremy(aka 3.8TransAM)=single turbo setup with AC and serpentine, headers/downpipe elbow only
3.)PETE (interested in single turbo header only(can pay today), in case my crap cracks )
4.)BJ (89gta383)=interested in single turbo or twin turbo serpentine kit minus turbo(need to do more research on what I need)
5.) Justin (Red91CamaroRS) - Interested in a single turbo, serp. set up WITH A/C - if a deal is worked out, pricing is a HUGE factor.
6.) carter- twin turbo racing kit, or just the headers. (if this goes through I will get the money for them.)
7.)Ray(Ray102386) RACE TWIN TURBO headers or complete system. Deployment is payin for it all
IRAQ8.)Jason(VenomCamaro) Single turbo kit or just the headers and intake tube.
9.)Tim(smokin87ta) Single turbo header, no a/c or anything to worry about.
10.)Baron(69charger383) Single turbo header, no a/c or anything, cash in hand..
11.)
12.)
13.)
14.)
15.)
Joined: Jan 2003
Posts: 949
Likes: 0
From: New Germany, MN
Car: 1986 Iroc
Engine: 5.3
Transmission: 4L80E
Axle/Gears: 9 Inch w/ 3.55
Re: BBS designs
1.) Dan (Metalhead212121) <--interested in twin turbo setup.. OR twin turbo headers..
2.)Jeremy(aka 3.8TransAM)=single turbo setup with AC and serpentine, headers/downpipe elbow only
3.)PETE (interested in single turbo header only(can pay today), in case my crap cracks )
4.)BJ (89gta383)=interested in single turbo or twin turbo serpentine kit minus turbo(need to do more research on what I need)
5.) Justin (Red91CamaroRS) - Interested in a single turbo, serp. set up WITH A/C - if a deal is worked out, pricing is a HUGE factor.
6.) carter- twin turbo racing kit, or just the headers. (if this goes through I will get the money for them.)
7.)Ray(Ray102386) RACE TWIN TURBO headers or complete system. Deployment is payin for it all IRAQ
8.)Jason(VenomCamaro) Single turbo kit or just the headers and intake tube.
9.)Tim(smokin87ta) Single turbo header, no a/c or anything to worry about.
10.)Baron(69charger383) Single turbo header, no a/c or anything, cash in hand..
11.)grover85 (single turbo header kit)
12.)
13.)
14.)
15.)
2.)Jeremy(aka 3.8TransAM)=single turbo setup with AC and serpentine, headers/downpipe elbow only
3.)PETE (interested in single turbo header only(can pay today), in case my crap cracks )
4.)BJ (89gta383)=interested in single turbo or twin turbo serpentine kit minus turbo(need to do more research on what I need)
5.) Justin (Red91CamaroRS) - Interested in a single turbo, serp. set up WITH A/C - if a deal is worked out, pricing is a HUGE factor.
6.) carter- twin turbo racing kit, or just the headers. (if this goes through I will get the money for them.)
7.)Ray(Ray102386) RACE TWIN TURBO headers or complete system. Deployment is payin for it all IRAQ
8.)Jason(VenomCamaro) Single turbo kit or just the headers and intake tube.
9.)Tim(smokin87ta) Single turbo header, no a/c or anything to worry about.
10.)Baron(69charger383) Single turbo header, no a/c or anything, cash in hand..
11.)grover85 (single turbo header kit)
12.)
13.)
14.)
15.)
Senior Member
Joined: Feb 2004
Posts: 608
Likes: 4
From: Isla del Encanto, P.R.
Car: GTA
Engine: Bone Stock 350ci HSR T-76 Turbo
Transmission: T56 6-speed
Axle/Gears: Stock
Re: BBS designs
How many of you guys are REALLY (cash in hand) interested?
Good News!! For those of you REALLY interested, I will be making a last run of turbo headers.
The business now had gone in a totally different direction and I rarely, and only use my jigs for making turbo systems for friends, special requests, or for me
(I am not going to sell the jigs so please dont ask). That is the reason why this will be the last run. Also, in the past, too many people told us that wanted headers but that was only a waste of phone time and wasted emails, that's the reason why I am only asking for those that are REALLY (cash in hand) interested. I am very sorry for being a bit harsh, but I hope that everyone understands.
Again, for those that are REALLY interested I will be making a new thread named: "BBSDesigns Turbo Headers; The Last Run". In that thread which will be starting today and ending 30 days from today, people interested will be writting down their request, then emailing me at bermudezbrainstormingdesigns@hotmail.com with the complete shipping information.
I will only be offering headers, sorry no turbos or anything else, just headers. The only headers I will be offering are:
1) Race Single Turbo Header for V belt. For use with V belt setup with or without the A/C. This header is the same as Tim "TurboedTPI" is using on his Turbo Firebird with the serpentine belt setup, but with no A/C. (600+ hp). $500.00 ea.
2) Race Single Turbo Header for Serpentine Belt. For use with serpentine belt setup with or without the A/C. This header is a very tight fit, the cold section of the turbo can't be too large or it will hit the valve cover, we recommend a 60-1 Hi Fi or equivalent turbocharger. (500-550 hp). $500.00 ea.
3) Street & Strip Twin Turbo Headers. For use with both V belt or serpentine belt setups with or without A/C. Twin full TO3 turbos are to be used. The passengers side turbo's wastegate actuator might need (depending on the turbo) to be modified a little to fit and clear the A/C dryer and hard line. (600hp). $900.00 per pair.
4) Race Twin Turbo Headers are not going to be offfered, sorry too time consuming, unless he or she is willing to wait. How long? two to three months. $1600.00 per pair.
Well, I will go now and start the new thread. I'll will include this information on the new thread as well.
Take care everyone
Good News!! For those of you REALLY interested, I will be making a last run of turbo headers.
The business now had gone in a totally different direction and I rarely, and only use my jigs for making turbo systems for friends, special requests, or for me
(I am not going to sell the jigs so please dont ask). That is the reason why this will be the last run. Also, in the past, too many people told us that wanted headers but that was only a waste of phone time and wasted emails, that's the reason why I am only asking for those that are REALLY (cash in hand) interested. I am very sorry for being a bit harsh, but I hope that everyone understands.Again, for those that are REALLY interested I will be making a new thread named: "BBSDesigns Turbo Headers; The Last Run". In that thread which will be starting today and ending 30 days from today, people interested will be writting down their request, then emailing me at bermudezbrainstormingdesigns@hotmail.com with the complete shipping information.
I will only be offering headers, sorry no turbos or anything else, just headers. The only headers I will be offering are:
1) Race Single Turbo Header for V belt. For use with V belt setup with or without the A/C. This header is the same as Tim "TurboedTPI" is using on his Turbo Firebird with the serpentine belt setup, but with no A/C. (600+ hp). $500.00 ea.
2) Race Single Turbo Header for Serpentine Belt. For use with serpentine belt setup with or without the A/C. This header is a very tight fit, the cold section of the turbo can't be too large or it will hit the valve cover, we recommend a 60-1 Hi Fi or equivalent turbocharger. (500-550 hp). $500.00 ea.
3) Street & Strip Twin Turbo Headers. For use with both V belt or serpentine belt setups with or without A/C. Twin full TO3 turbos are to be used. The passengers side turbo's wastegate actuator might need (depending on the turbo) to be modified a little to fit and clear the A/C dryer and hard line. (600hp). $900.00 per pair.
4) Race Twin Turbo Headers are not going to be offfered, sorry too time consuming, unless he or she is willing to wait. How long? two to three months. $1600.00 per pair.
Well, I will go now and start the new thread. I'll will include this information on the new thread as well.
Take care everyone
Last edited by BBSDesigns; Jun 1, 2007 at 01:16 AM.
Junior Member
Joined: Jun 2007
Posts: 42
Likes: 0
From: portland or
Car: 1986 camaro Z28 iroc
Engine: lb9 topend 350short block
Transmission: 700r4
Axle/Gears: stock 10 bolt 3:23
Re: BBS designs
ok bbs, you have lots of people on this site and others that are willing to buy your kits. and not the ssautochrome crap. they have already copied the stuff. what more do your guys really have to lose? If everyone that knows of your kits and what happend with ssautocrap, then get some decent patents and copyrights and start building kits! I dont have the funds for that stuff to be done to my car right now, but within a year i might and It would be nice if guys like me (underdogs with scores to settle) could get a fair price on a decent turbo kit. someones going to fill this markets need at one point or another for a good turbo kit that doesnt cost an arm or a leg. Id like to see you guys be the people to see!!!! So they stole the design. they cant steal the quality. f*** um!
Junior Member
Joined: Jun 2007
Posts: 42
Likes: 0
From: portland or
Car: 1986 camaro Z28 iroc
Engine: lb9 topend 350short block
Transmission: 700r4
Axle/Gears: stock 10 bolt 3:23
Re: BBS designs
Hey, sorry if I got alittle harsh in my reply above. I didnt see the second page of the tread before I posted that. I did my research and see your in buisness with selling the headers again. but It would be cool if one day bbs could make the full kits single, twins, intercooled....etc. 
Thread
Thread Starter
Forum
Replies
Last Post
Z28/ZR1
Engine/Drivetrain/Suspension Parts for Sale
3
Oct 23, 2015 01:04 PM
dimented24x7
Tech / General Engine
4
Sep 6, 2015 03:51 PM
