Suggestions on a good short block for Nitrous applications?
Thread Starter
Member
iTrader: (1)
Joined: Dec 2000
Posts: 472
Likes: 0
From: DC Metro area
Car: 91 Camaro Z/28
Engine: 5.7L TPI
Transmission: TH700-R4
Suggestions on a good short block for Nitrous applications?
Right now I'm running a 75 shot and later planned on running a 150 shot. I plan on building a short block and wanted some suggestion on what to use as far as pistons(flat top,dished ,forged,comp. ratio.),rings etc. Maybe what brands are good also. I don't want to go too overboard though.
------------------
91 Camaro Z/28 5.7
NX kit
3" exhaust with Flowmaster DeltFlow 40series
SLP runners
SLP 1 5/8" headers
TPIS airfoil
K&Ns with gutted airbox
Jet low temp. fan switch and 180 degree thermostat
Rebuilt 700R4(borg warner/raybestos clutches,Kevlar band,vette servo)
B&M 2400 stall torque converter
renegaderacing.cz28.com
------------------
91 Camaro Z/28 5.7
NX kit
3" exhaust with Flowmaster DeltFlow 40series
SLP runners
SLP 1 5/8" headers
TPIS airfoil
K&Ns with gutted airbox
Jet low temp. fan switch and 180 degree thermostat
Rebuilt 700R4(borg warner/raybestos clutches,Kevlar band,vette servo)
B&M 2400 stall torque converter
renegaderacing.cz28.com
Thread
Thread Starter
Forum
Replies
Last Post
theshackle
Tech / General Engine
4
Mar 5, 2017 06:37 PM