where can i get a Tpi Nos plate that will handle up to 200-250hp the regualr ones from nos say 150 will a lt1 plate work?

tpi won't have good fuel/nitrous distribution to run that big of a shot through it. That's fogger territory, not sure how guys run foggers on tpi's though.

ive seen the nozzles tapped into the runners, but i have a feeling that would creat too much puddling of the fuel because of how sharp of a curve they are. the only way i can see you getting up that much, is running a 2 stage dry/wet system.

Use this,


Or the TPI plate and the above setup for a dual stage setup.

I am going to the stealth ram soon also, but for now want to get nos on the tpi, i hacve 400hp NX kit on a gas truck i am taking off and gone use all the line and solinoids from it, all i need is a plate to handle 200hp

My plate will do a 200HP shot, just put 100hp jets into each nozzle and away you go.




Plate has the lines to the solenoids and there is one nozzle, I traded the other nozzle as part of a nitrous kit to a friend for some wheels.
Make me a reasonable offer for the plate setup if you are interested in it.

do you have the jets and is that fogger nozzles?

I don't have any jets, and those are NOS fogger nozzles (I only have one).
the nozzles look identical to the ones on my old Direct Port setup,

The NOS plate for the TPI is a cheater plate and WILL handle a 250 shot. I heard this directly from NOS so it's not hearsay. You will get some pretty funky distribution with that big of a shot through a plate but I've done 200 with no issues as of yet.