Hi all, a quick opinion or two abouit N2O:

I just bought a "universal" NX Incognito 50 wet shot kit, to use with my TPI 305. does the N2O injector need to be in the intake, BEFORE the MAF Sensor, or between the MAF and TB? With a wet shot, I would assume between the two, shooting straight into the TB? But I just wanted some input...

Also, where can I get my N2O bottles filled? Do auto parts stores like Advance/Checker carry it, or where can I expect to look?

Thanks everyone!

Elliott

 

put it as close to the tb as possible, i would try to put it on the botom of the tubbing and perfectly in the center so it goes threw each butterfly evenly

 

if its a wet shot, it will go AFTER the MAF deffinately, but im assuming you have the nossle, so you would run that before the TB. The only places you can get nitrous filled is a race shop, chain parts stors (autozone, napa etc,) dont fill.

 

i know checkers does depending on where you live

 

I was wondering, thinking that Checker ProShop might stock N2O... I found some local speed shops close by, as well. One more question: Can I put a 100 nozzle on a kit like this, even though it only COMES with a 50?

Thanks everyone, I really appriciate it!

Elliott

 

YOU SHOULD BE ABLE TO CHANGE THE JETS, CHANCES ARE THE JETS THEY SUPPLIED YOU ARE PIG RICH - MY SUGGESTION IS TO NOT WORRY ABOUT THE 100 SHOT AT THIS TIME AND GET IT RUNNING RIGHT WITH THE 50 FIRST.

MAKE SURE YOU HAVE AMPLE FUEL PRESSURE AND DELIVERY BEFORE TRYING THE 100 SHOT.

gOOD LUCK -