Anyone know what n2o Bottle temp = what PSI
Anyone know what n2o Bottle temp = what PSI
I have a dash mounted guage and it always seems to stop at about 800psi. The bottle seems to get warmer. Very warm to the touch. Probably 80-85 degrees. Anyone know what each degree equals in bottle pressure (PSI)?
Thanks
Thanks
Supreme Member

Joined: Oct 1999
Posts: 1,112
Likes: 1
From: W. Kentucky
Car: 83 Z-28
Engine: 406
Transmission: TH350
Axle/Gears: 3.70
The heater was still on and the thermostat turns it off at 85 degrees so I'd say it was less than 85. It kind of sounds like your bottle isn't all the way full or something. Do you have a gauge on the bottle itself? Maybe the dash mounted gauge isn't reading correctly.
Senior Member
Joined: Jan 2002
Posts: 600
Likes: 0
From: orlando
Car: 98 Camaro SS
Engine: LS1
Transmission: M6
That's the problem with the NOS brand bottle heaters, they are regulated by temperature, while the NX heaters are regulated by the bottles pressure..
Your poblem is a very common one with NOS heaters, weigh your bottle and find out how much N2O is in it, and I'd bet that it's pretty low.....
Your poblem is a very common one with NOS heaters, weigh your bottle and find out how much N2O is in it, and I'd bet that it's pretty low.....
Thread
Thread Starter
Forum
Replies
Last Post





