NEW! 90-92 V-8 or V-6 Tachometer circuit boards -Tach Fix! 1 Attachment(s) Hello Everyone, I have been an member of this forum for years selling and refurbishing camaro tachometers. Well, I have finally built a new, direct replacement tachometer circuit board for the 90-92 Camaros. I have boards for both V8 and V6 camaros available. They are available to forum members for $45 shipped and include a lifetime warranty. Boards with LED's (for diagnosing signal and 12v) are $55. All components are American made and hand assembled/tested by me. I calibrate them before shipping, but there is the ability to fine tune your RPM if you want through a small potentiometer. Please let me know if you have any questions. Thanks! Greg https://cimg6.ibsrv.net/gimg/www.thi...531d0e3e1e.jpghttps://cimg0.ibsrv.net/gimg/www.thi...037b462f1b.jpg |
Re: NEW! 90-92 V-8 or V-6 Tachometer circuit boards Just one question, where do I send payment? I would like one, I am a working tachometer away from a completely working factory gauge cluster. |
Re: NEW! 90-92 V-8 or V-6 Tachometer circuit boards Nice. Would the potentiometer be extra? |
Re: NEW! 90-92 V-8 or V-6 Tachometer circuit boards
Originally Posted by (Anthony)
(Post 6148447)
Just one question, where do I send payment? I would like one, I am a working tachometer away from a completely working factory gauge cluster. -Send as a gift to avoid fees- or personal check to: Greg Johnson 10282 Creighton Pl Keithville, La 71047 |
Re: NEW! 90-92 V-8 or V-6 Tachometer circuit boards
Originally Posted by Cheerio
(Post 6148527)
Nice. Would the potentiometer be extra? |
Re: NEW! 90-92 V-8 or V-6 Tachometer circuit boards Is money order acceptable payment? |
Re: NEW! 90-92 V-8 or V-6 Tachometer circuit boards A money order is fine. Please mail it to: Greg Johnson 10282 Creighton Place Keithville, La 71047 |
Re: NEW! 90-92 V-8 or V-6 Tachometer circuit boards Payment sent, thanks! |
Re: NEW! 90-92 V-8 or V-6 Tachometer circuit boards Looks good Greg. The board you repaired for me 4-5 years ago with potentiometer is still working great. The adjustable feature really is nice. Highly recommended. Thanks again. Gary Anderson |
Re: NEW! 90-92 V-8 or V-6 Tachometer circuit boards I have a 91 z28 305 5spd and the tach works but doesn't light up do you sell something to fix that I have already replaced all the bulbs I can see |
Re: NEW! 90-92 V-8 or V-6 Tachometer circuit boards Payment sent |
Re: NEW! 90-92 V-8 or V-6 Tachometer circuit boards
Originally Posted by Bill91z28
(Post 6149652)
I have a 91 z28 305 5spd and the tach works but doesn't light up do you sell something to fix that I have already replaced all the bulbs I can see Unfortunately I don't, that is a separate problem from the tach circuit board. It might be a problem with the flexible circuit board on the back of the cluster. |
Re: NEW! 90-92 V-8 or V-6 Tachometer circuit boards Anthony, the chip is in the mail. Thanks! Greg |
Re: NEW! 90-92 V-8 or V-6 Tachometer circuit boards
Originally Posted by gcj280
(Post 6150924)
Anthony, the chip is in the mail. Thanks! Greg Thanks Greg, I can't wait to try it out! It will be nice to have a fully functioning OEM gauge cluster. |
Re: NEW! 90-92 V-8 or V-6 Tachometer circuit boards -Tach Fix! If you need one, shoot me an offer. thanks, Greg |
Re: NEW! 90-92 V-8 or V-6 Tachometer circuit boards -Tach Fix! Payment sent! |
Re: NEW! 90-92 V-8 or V-6 Tachometer circuit boards -Tach Fix! bump |
Re: NEW! 90-92 V-8 or V-6 Tachometer circuit boards -Tach Fix! Free bump! These work awesome, fixed me right up, tried everything on my original board (replaced all resistors and caps, checked all traces, etc) and started to think maybe the gauge mechanism on my tach was actually shot. New board from Greg, and the tach is good as new. Actually, since it's calibrated and adjustable, even better than new. Thanks again! |
Re: NEW! 90-92 V-8 or V-6 Tachometer circuit boards -Tach Fix! Is this strictly the Tach? My oil pressure gauge isn’t working as well, i put a mechanical gauge to make sure it does indeed have pressure. But those two gauges are the only things not working. I’m going to try a few other remedies but if that doesn’t fix it I am interested in your board. Thanks! |
Re: NEW! 90-92 V-8 or V-6 Tachometer circuit boards -Tach Fix! This is a new circuit board just for the tachometer. the oil pressure gauge runs off the power and ground from the cluster and a signal from the sensor. sounds good. just let me know. thanks! Greg |
Re: NEW! 90-92 V-8 or V-6 Tachometer circuit boards -Tach Fix! Greg, sounds like this circuit board might be a good fix. In your expert opinion do you think it would also address high reading tachs? At about 70 mph I'm doing 6750 rpm according to my tach lol. |
Re: NEW! 90-92 V-8 or V-6 Tachometer circuit boards -Tach Fix!
Originally Posted by iroczrockz
(Post 6203744)
Greg, sounds like this circuit board might be a good fix. In your expert opinion do you think it would also address high reading tachs? At about 70 mph I'm doing 6750 rpm according to my tach lol. or let me know if you prefer other payment methods. I'll have it in the mail as soon as payment is received. Thanks! Greg |
Re: NEW! 90-92 V-8 or V-6 Tachometer circuit boards -Tach Fix! Will this new board work for Firebirds also? If not, do you offer a board that does? Thanks! |
Re: NEW! 90-92 V-8 or V-6 Tachometer circuit boards -Tach Fix!
Originally Posted by Sweatlock
(Post 6204258)
Will this new board work for Firebirds also? If not, do you offer a board that does? Thanks! Thanks! greg |
Re: NEW! 90-92 V-8 or V-6 Tachometer circuit boards -Tach Fix! Pm and payment sent! |
Re: NEW! 90-92 V-8 or V-6 Tachometer circuit boards -Tach Fix! hey Matt. the circuit board is in the mail. Thanks! Greg |
Re: NEW! 90-92 V-8 or V-6 Tachometer circuit boards -Tach Fix! Hey Greg, just sent payment for the V8 circuit board. Thank you for making these. |
Re: NEW! 90-92 V-8 or V-6 Tachometer circuit boards -Tach Fix! Payment sent for v8 tach let me know when it's shipped thanks |
Re: NEW! 90-92 V-8 or V-6 Tachometer circuit boards -Tach Fix! Hi and thanks for being a source to solve this problem - looks like there are lots of people who have it! Payment sent via Paypal 1991 RS 5.0 with 5-speed that has tach reading near redline at idle. DO you need more info or shipping address? Rick |
Re: NEW! 90-92 V-8 or V-6 Tachometer circuit boards -Tach Fix! Iroczrockz - I shipped yours last friday. Thanks! go-getta29 - I need an address please. Thanks! Greg |
Re: NEW! 90-92 V-8 or V-6 Tachometer circuit boards -Tach Fix!
Originally Posted by evilcat155
(Post 6206959)
Hi and thanks for being a source to solve this problem - looks like there are lots of people who have it! Payment sent via Paypal 1991 RS 5.0 with 5-speed that has tach reading near redline at idle. DO you need more info or shipping address? Rick yes, please PM me your full name and address. Thanks! Greg |
Re: NEW! 90-92 V-8 or V-6 Tachometer circuit boards -Tach Fix! Is this needed for an 86 tach if doing an LS1 swap? |
Re: NEW! 90-92 V-8 or V-6 Tachometer circuit boards -Tach Fix!
Originally Posted by hellz_wings
(Post 6207289)
Is this needed for an 86 tach if doing an LS1 swap? |
Re: NEW! 90-92 V-8 or V-6 Tachometer circuit boards -Tach Fix! BUMP |
Re: NEW! 90-92 V-8 or V-6 Tachometer circuit boards Hi, My tach is pegged at the max (91 RS 305 auto) and the fuel gage and speedo are messed up. Could that all be related and do you have a fix for that? I plan on ordering your tach repair circuit board but wanted to see if you have something for that too. Thanks |
Re: NEW! 90-92 V-8 or V-6 Tachometer circuit boards -Tach Fix! Hey my tach works It's my speedo and odometer and tripometer that don't work. Do you fix that also?? |
Re: NEW! 90-92 V-8 or V-6 Tachometer circuit boards -Tach Fix! I've never really looked into fixing speedos. I've got plenty of work fixing these old GM tachs. LOL! I've read that it can be a simple plastic part that breaks off causing the tripometer to stop working. I can recommend a couple of good gauge repair shops if you are interested. Thanks! Greg |
Re: NEW! 90-92 V-8 or V-6 Tachometer circuit boards
Originally Posted by nitrozamboni
(Post 6227446)
Hi, My tach is pegged at the max (91 RS 305 auto) and the fuel gage and speedo are messed up. Could that all be related and do you have a fix for that? I plan on ordering your tach repair circuit board but wanted to see if you have something for that too. Thanks All of the gauges are independent except for maybe a power or ground wire. But i'm almost certain your tach circuit board is bad. Your tachs symptoms are very common among camaro owners. It is possible, I suppose, that they could be all related. But highly unlikely. I would check all of the connections for proper voltage and ground before discounting the related problem. I have a couple of chips ready to go when you are ready. Thanks! Greg |
Re: NEW! 90-92 V-8 or V-6 Tachometer circuit boards Thanks, I'll look into that. Probably will order it in the next few days. Lee |
Re: NEW! 90-92 V-8 or V-6 Tachometer circuit boards -Tach Fix! Sending payment via Paypal shortly for the tach circuit board for my 91 305 auto RS! Thanks! Lee B |
Re: NEW! 90-92 V-8 or V-6 Tachometer circuit boards -Tach Fix! Hi Lee. It's in the mail. Thanks! Greg |
Re: NEW! 90-92 V-8 or V-6 Tachometer circuit boards -Tach Fix! Hi Greg, Got the tach circuit board and just installed it. It's fixed! Now if you could help me figure out whats wrong with the fuel gage? :lmao: Thanks! |
Re: NEW! 90-92 V-8 or V-6 Tachometer circuit boards -Tach Fix! Awesome! Usually it's a bad sender or a bad meter inside the fuel gauge. It doesn't have a circuit board like a tachometer does. I would try to locate a new fuel gauge in a parts yard if possible. They usually run about $10 here. Thanks! Greg |
Re: NEW! 90-92 V-8 or V-6 Tachometer circuit boards -Tach Fix! Thanks, I'll keep looking! |
Re: NEW! 90-92 V-8 or V-6 Tachometer circuit boards -Tach Fix! Hey gcj280 and third-gen friends I recently acquired a gauge cluster from mid-80's Z28. I want to install the cluster in my 1988 V6 Sport Coupe. As far as fitment, it looks plug-and-play. I've had my V6 cluster out of the car while I was examining issues with the Vehicle Speed Sensor. So, I'm comfortable pulling the gauge cluster. That said, I have not yet disassembled a cluster to get a feel for the details of swapping circuit boards. The tachometer on each cluster is "pegged" in the typical way these tachs tend to do. If I install a V6 tachometer circuit board, on the Z28 cluster, what are my chances that the tach will funtion and be at least clost to correct calibration? There is a pretty good thread at https://www.thirdgen.org/forums/inte...atability.html that sort of talks about this issue. But, it really doesn't address my exact question about upgrading a V6 car to the V8 gauge cluster by replacing the V8 tach board with a V6 tach board. |
Re: NEW! 90-92 V-8 or V-6 Tachometer circuit boards -Tach Fix! That’s an interesting issue. I don’t have a lot of experience with V6 clusters fitting. I do milk now that it will physically fit, BUT I am not sure if you wiring will accommodate the gauges and if they are the same calibration as the V6. I DO know for a fact that the tachs are interchangeable if your V6 came with one from the factory. I have done many conversions of V6 tachs to read correctly with a V8. The oil gouge would probably be off though. I believe V6 cars read to 80psi and most V8’s read to 60. If both tachs are pegging when powered up, then both circuit boards are bad. Swapping them won’t help unfortunately. I can send you a brand new circuit board that will fix either one. Thanks! Greg |
Re: NEW! 90-92 V-8 or V-6 Tachometer circuit boards -Tach Fix! Thanks Greg. I've got honey-do stuff for the next four days, and I will have my first chance at seeing what the V8 cluster does on my car as soon as I get that behind me. My V6 cluster does go to 80 with oil pressure. I'm OK if the oil on the V8 cluster is pegged when I'm giving it the beans. The V6 temp gauge works only when it feels like it, and the VSS is giving crazy numbers when I data-log. Should be interesting to see what changes with the different cluster. |
Re: NEW! 90-92 V-8 or V-6 Tachometer circuit boards -Tach Fix! Revisiting this thread to report on the issue of interchangeablility of V6 vs. V8 tachometer in the context of complete gauge-cluster swap. See https://www.thirdgen.org/forums/elec...luster-v6.html |
Re: NEW! 90-92 V-8 or V-6 Tachometer circuit boards -Tach Fix! Greg, a check is on the way to you for $65.00. |
Re: NEW! 90-92 V-8 or V-6 Tachometer circuit boards -Tach Fix! Sounds good! I'll have it in the mail as soon as I receive the check. Thanks! Greg |
All times are GMT -5. The time now is 05:34 AM. |
© 2024 MH Sub I, LLC dba Internet Brands