New regional board! North West Canada/US
Thread Starter
Senior Member
Joined: Apr 2000
Posts: 860
Likes: 0
From: Alberta, Canada
Car: 1987 IROC
Engine: Vortec 350 TPI
Transmission: 7004r
New regional board! North West Canada/US
I've noticed that us north westerners are lacking a board of our own, while every other region seems to be covered.
I know there are lots of alberta, bc, washington montana and manitoba guys on this site.
How about a regional board for us guys too!?
:rockon:
I know there are lots of alberta, bc, washington montana and manitoba guys on this site.
How about a regional board for us guys too!?
Thread Starter
Senior Member
Joined: Apr 2000
Posts: 860
Likes: 0
From: Alberta, Canada
Car: 1987 IROC
Engine: Vortec 350 TPI
Transmission: 7004r
yea cascade seems to have northwest of US covered, and BC
but what about alberta, sask,manitoba ???
I know we have lots of alberta guys here, and there's several from manitoba and even the yukon
All in favor for a west canada forum????
but what about alberta, sask,manitoba ???
I know we have lots of alberta guys here, and there's several from manitoba and even the yukon
All in favor for a west canada forum????
Trending Topics
Supreme Member
Joined: Feb 2002
Posts: 1,036
Likes: 0
From: Prince Albert, Saskatchewan, Canada
Car: 1987 Trans Am GTA
Engine: 357ci Stealth Ram - Under Pressure
Transmission: Built 700r4/Pro Yank 3400 Extreme
Axle/Gears: 9-Bolt 3.27
eh
i am from Saskatchewan,
Provinces that should be included:
ALBERTA SASKATCHEWAN and MANITOBA.
This IS central CANADA. not Western...
Provinces that should be included:
ALBERTA SASKATCHEWAN and MANITOBA.
This IS central CANADA. not Western...
Supreme Member
Joined: Dec 1999
Posts: 1,934
Likes: 1
From: Calgary
Car: 89 Formula
Engine: 350
Transmission: TH 700R4
Axle/Gears: 3.27
Hmm....Cascade crew? Nah. Says BC- but the rest are American- so far away from Alberta 
Nice to chat with people that are actaually neighbors.
I'd be happy with a Manitoba, Sask, Albera and BC
though.
Oh look...Ontario gets their own!!!
We always get screwed in the West (by the Gov't I mean)

Nice to chat with people that are actaually neighbors.
I'd be happy with a Manitoba, Sask, Albera and BC
though.
Oh look...Ontario gets their own!!!

We always get screwed in the West (by the Gov't I mean)
Gta-Paladin he already knows about the thirdgen club.
Anyways. How many people have u found that want to join the club. I found 3 people that want to join and are going to be at the August 8th meeting.
What about u Nosaint have u found any people to join.
Later
Ryan
Anyways. How many people have u found that want to join the club. I found 3 people that want to join and are going to be at the August 8th meeting.
What about u Nosaint have u found any people to join.
Later
Ryan
Well Craig, i moved to BC So, i really havent found anyone..
I found out i was moving on fri and was packed parked the gta and in victoria on sunday... Such is life in the military son!
Actually i found one guy get ahold of him at
<iroc4lifess@hotmail.com>
hes got msn
I found out i was moving on fri and was packed parked the gta and in victoria on sunday... Such is life in the military son!
Actually i found one guy get ahold of him at
<iroc4lifess@hotmail.com>
hes got msn
Thread Starter
Senior Member
Joined: Apr 2000
Posts: 860
Likes: 0
From: Alberta, Canada
Car: 1987 IROC
Engine: Vortec 350 TPI
Transmission: 7004r
You guys in calgary gonna goto the David T's fbody drag night in edmonton? I'm hoping to be able to make it, you guys need to plan a convoy to edmonton on the 18th so i can meet some of ya!
:rockon:
:rockon:
Member
Joined: Jul 1999
Posts: 479
Likes: 0
From: Calgary, Canada
Car: 1986 Trans Am
Engine: 305 TPI
Transmission: Auto
Thanos!
your gone! damm,
you were the entertainment, good thing i got to test drive the Konis b4 u left.
I got 2 guys but im not sure if they are coming
gonna have to get those cards printed up!
see you thursday
Drag night in EDM?
saturdays are not good but i might be able to swing it if a bunch of us are gonna go.
your gone! damm,
you were the entertainment, good thing i got to test drive the Konis b4 u left.
I got 2 guys but im not sure if they are coming
gonna have to get those cards printed up!
see you thursday
Drag night in EDM?
saturdays are not good but i might be able to swing it if a bunch of us are gonna go.
Last edited by nosaint; Aug 5, 2002 at 10:23 AM.
Supreme Member
Joined: Dec 1999
Posts: 1,934
Likes: 1
From: Calgary
Car: 89 Formula
Engine: 350
Transmission: TH 700R4
Axle/Gears: 3.27
David T's day at the track is Sunday the 18th and
it takes place during the day.
Hopefully lots of F-bodies but it's open to all GM vehicles
Go to
http://www.davidt.com/newsevents.htm
and check it out. I registered over the phone last year- worked out fine.
I also cut my 1/4 mile by 0.5 sec soley due to the lower altitude!
Nosaint- you having another meet on thursday?
Maybe we should go to ******- I think that's wednesday?
it takes place during the day.
Hopefully lots of F-bodies but it's open to all GM vehicles
Go to
http://www.davidt.com/newsevents.htm
and check it out. I registered over the phone last year- worked out fine.
I also cut my 1/4 mile by 0.5 sec soley due to the lower altitude!
Nosaint- you having another meet on thursday?
Maybe we should go to ******- I think that's wednesday?
Member
Joined: Jul 1999
Posts: 479
Likes: 0
From: Calgary, Canada
Car: 1986 Trans Am
Engine: 305 TPI
Transmission: Auto
Ive been to ***** on Wed last year. My car isnt that nice to be one of the crowd, more of a spectator. Besides I kinda like just the 3rd gen aspect of it all.
The meeting is Thursday the 8th. At the sunridge mall, bay parking lot. 8 o'clock
Hope to see this 1LE?
The meeting is Thursday the 8th. At the sunridge mall, bay parking lot. 8 o'clock
Hope to see this 1LE?
Supreme Member
Joined: Jun 2001
Posts: 3,238
Likes: 4
From: Calgary, Alberta, Republic of Western Canada
Car: 1986 Sport Coupé
Engine: 305-4v
Transmission: 700R4 and TransGo2
Re: eh
Originally posted by mike1986fyrbird
i am from Saskatchewan,
Provinces that should be included:
ALBERTA SASKATCHEWAN and MANITOBA.
This IS central CANADA. not Western...
i am from Saskatchewan,
Provinces that should be included:
ALBERTA SASKATCHEWAN and MANITOBA.
This IS central CANADA. not Western...
You either need a geography lesson or you made a mistake in your posting!
Saskatchewan and Manitoba are in Western Canada and not central Canada. That's Ontario and Quebec--yuck!!!
We should include Montana and the Dakotas because they are left out of all the other boards, too.
Supreme Member
Joined: Dec 1999
Posts: 1,934
Likes: 1
From: Calgary
Car: 89 Formula
Engine: 350
Transmission: TH 700R4
Axle/Gears: 3.27
You can pre-register or pay at the door.
Cost is 40$ which is a bit steep but that includes addmission for 2 additional people (spectators, pit crew ect)
I'm going to try to make it.
Cost is 40$ which is a bit steep but that includes addmission for 2 additional people (spectators, pit crew ect)
I'm going to try to make it.
Yeah im pretty sure that the 18th is a Sunday.
Cant u take a day off or somthing. Im sure that this guy is going to come. He will be at the meeting on Thursday Nosaint. His car is badass. Hes got a 383 TPI stroker built by davenports.
Cant u take a day off or somthing. Im sure that this guy is going to come. He will be at the meeting on Thursday Nosaint. His car is badass. Hes got a 383 TPI stroker built by davenports.
Supreme Member
Joined: Dec 1999
Posts: 1,934
Likes: 1
From: Calgary
Car: 89 Formula
Engine: 350
Transmission: TH 700R4
Axle/Gears: 3.27
Not that I remember- you'll need a helmet, must wear jeans- NO shorts- battery tie-down, over flow tank- something about not being able to start the car while in gear?
I'm sure if your cars half way decent it would be no problem-
oh dual throttle return springs too
I'm sure if your cars half way decent it would be no problem-
oh dual throttle return springs too
Last edited by avro206; Aug 6, 2002 at 07:37 PM.
Yeah I also should be able to pass tech. I hope that the weather is going to be nice for that weekend.
Does anyone know what time it starts or anything like that. Is there more information on whats going on.
Mike u were there last year right. Was it really busy. How many cars were racing.
Does anyone know what time it starts or anything like that. Is there more information on whats going on.
Mike u were there last year right. Was it really busy. How many cars were racing.
Supreme Member
Joined: Dec 1999
Posts: 1,934
Likes: 1
From: Calgary
Car: 89 Formula
Engine: 350
Transmission: TH 700R4
Axle/Gears: 3.27
Last year was a terrible turnout 
I think they rented it twice last year- and the time I went there was something big going on in Edmonton- that's why the attendance was low.
I'd say 30 last year- tops. I expect a bigger turnout this time around.
It starts early- I think 10am and goes until...5?
not sure though

I think they rented it twice last year- and the time I went there was something big going on in Edmonton- that's why the attendance was low.
I'd say 30 last year- tops. I expect a bigger turnout this time around.
It starts early- I think 10am and goes until...5?
not sure though
Thats not bad. It would be good for racing. U wouldnt have to wait forever to race like some nights at Race City having to wait 45 minutes to make a pass.
Anyways when are we going to get our own board. We have had 30 somthing posts in a week or so.
Anyways when are we going to get our own board. We have had 30 somthing posts in a week or so.
with our own actual board people will be more likely to post anyways... since this isnt even in the regional board category 
Huys tell me how the meeting goes tonight i want the down low, and see if sitting bull has put his heads on yet

Huys tell me how the meeting goes tonight i want the down low, and see if sitting bull has put his heads on yet
Mike did u get those directions on how to get to the track in edmonton. I dont want to get lost getting there that would suck.
When are u leaving for holidays. Maybe we could make a convoy up there because im sure that Travis is going to come too.
Thanks
When are u leaving for holidays. Maybe we could make a convoy up there because im sure that Travis is going to come too.
Thanks
Last edited by Gta-Paladin; Aug 9, 2002 at 02:52 PM.
Supreme Member
Joined: Dec 1999
Posts: 1,934
Likes: 1
From: Calgary
Car: 89 Formula
Engine: 350
Transmission: TH 700R4
Axle/Gears: 3.27
Ryan- N. on highway 2- turn off westbound on highway 19- at that point your only 3-4 minutes away and it'll be on your left.
It's just around Leduc-realy close to the airport.
I go on holidays on Sunday- and will swing back through Edmonton- so I can't convoy
It's just around Leduc-realy close to the airport.
I go on holidays on Sunday- and will swing back through Edmonton- so I can't convoy
Supreme Member
Joined: Jun 2001
Posts: 3,238
Likes: 4
From: Calgary, Alberta, Republic of Western Canada
Car: 1986 Sport Coupé
Engine: 305-4v
Transmission: 700R4 and TransGo2
Sorry I couldn't make it for our second meeting last night guys!
My car took longer than expected to get the new 3.42 gears in. I took it in Wednesday evening and it's now Friday at 5:42 pm and I still don't have it back yet
When is the next one?
My car took longer than expected to get the new 3.42 gears in. I took it in Wednesday evening and it's now Friday at 5:42 pm and I still don't have it back yet

When is the next one?
Thanks mike. Ill probley see u there. I am planning on being there around 12:00 or 1:00pm I still got to talk to Travis and see when he wants to go.
Sitting bull. Check out tys site for information on the next thirdgen meeting and all the new pics.
www.nosaint.ca
I think its on August 22nd at 7:00pm
Sitting bull. Check out tys site for information on the next thirdgen meeting and all the new pics.
www.nosaint.ca
I think its on August 22nd at 7:00pm
Supreme Member
Joined: Jun 2001
Posts: 3,238
Likes: 4
From: Calgary, Alberta, Republic of Western Canada
Car: 1986 Sport Coupé
Engine: 305-4v
Transmission: 700R4 and TransGo2
Originally posted by Gta-Paladin
putting in 3.42's are we>? trying to get that edge on me off of the line are we sitting bull ?
And i thought you said you didnt want a "loud" "fast" car
putting in 3.42's are we>? trying to get that edge on me off of the line are we sitting bull ?
And i thought you said you didnt want a "loud" "fast" car
I just picked up my heads and cam today and they're ready to be installed. Should be around 300 hp soon



