When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Don't know what the other specs of your build are but I've got a set of pro-filer heads that I'm about to pull off. They can't have more than 20 miles on them. They are 63cc chambered with 185cc runners, 2.02/1.6 valves with double hydraulic roller springs good for .650 lift. They are "as cast" and fit a 1206 felpro intake gasket.
Look up pro-filer online, they are pretty legit.
900+ shipping (for the pair)
Last edited by truckerz; May 29, 2016 at 11:27 PM.
I have some pro comp 190cc aluminum heads, they have 64cc chambers, and we're originally purchased for a 383 build, but I bought them for a nice 355 build. Good heads, part # is pc3002a, they are angle plug, bronze valve guides, and come with a factory 3 angle valve job.
They are brand new. Pm me if you're interested.
