TPI Intake Manifold on 1992 Z28 G92
Thread Starter
Junior Member
Joined: Dec 2006
Posts: 24
Likes: 0
From: San Antonio, Texas
Car: 1992 Z28 G92
Engine: 350-245 (B2L)
Transmission: ?
Axle/Gears: G80
TPI Intake Manifold on 1992 Z28 G92
Good morning everyone, I have been scouring the internet for a solution to a problem. Finally gonna try here.
I have a 1992 Camaro Z28 G92 that needs a replacement TPI Intake manifold, my mechanic tells me that the engine has cast iron heads. I believe the original intake was aluminum.
My question is, how do I identify the proper replacement part? I'm told the casting number on the intake will clarify the issue, but I don't have this info available to me at the moment.
I really hope someone can help me here, it is very hard to coordinate car repairs while deployed overseas. Thank you guys in advance for your help.
I have a 1992 Camaro Z28 G92 that needs a replacement TPI Intake manifold, my mechanic tells me that the engine has cast iron heads. I believe the original intake was aluminum.
My question is, how do I identify the proper replacement part? I'm told the casting number on the intake will clarify the issue, but I don't have this info available to me at the moment.
I really hope someone can help me here, it is very hard to coordinate car repairs while deployed overseas. Thank you guys in advance for your help.
Joined: Dec 2004
Posts: 16,754
Likes: 996
From: Mile High Country !!!
Car: 1967 Camaro, 91 z28
Engine: Lb9
Transmission: M20
Axle/Gears: J65 pbr on stock posi 10bolt
Re: TPI Intake Manifold on 1992 Z28 G92
Casting number 10088016 . Or Iirc 10088015 87-88 Tpi f body base will work.
Vettes used the earlier mounting holes for the center four holes and a coolant crossover.
Last edited by Tuned Performance; Dec 18, 2016 at 11:53 PM.