Anybody out there have the part number for these O-Rings for the 5.0 TPI Fuel lines?

Thanks Bob

 

Oh, somewhere... http://austinthirdgen.org/parts/html/main1.htm should be able to look them up. Not sure the numbers will really be all that useful. Any place short of the dealership is just going to match em up by eyeball to the random assortment.

 

I found them Drew. Totally unnecessary thread.

 

try
feed line 22514722
rtn line 22516256

 

Glad you found replacements.You got them pretty fast,did you get them locally?

 

Hey Franny. Yes. I took those numbers and crossed then to AC Delco, which led me to Auto Zone. Last pack in Huntsville!!! Thank you!!!!

 

Pretty sure that's the kit for rebuilding the fuel rail. I suppose if the rings fit, wear them. Standard SK24 is another brand of the same set...

The brown Viton inlet/outlet O-rings are easy enough to find. Parts stores usually have an assortment on the pegs, or you can find them by digging around the websites. Hardest part is if you need more than a pair, since they can be hard to find in quantity.

 

It is Drew, complete set. Which work out since i have the whole fuel rail apart. Ready to assemble tomorrow.

 

Keep a copy of this handy, and you'll never NOT find an O-ring again:

https://www.parker.com/literature/OR...g_Handbook.pdf

 

for future reference, the o rings that go between the rubber line and the solid lines on the frame rail are "Dorman 800-013 Viton O Rings"

 

Thanks all.
I got them at Oriellys and Auto Zone. Bosch Injectors installed, all fuel rail O-Rings, 9th injector O-Ring included. 57K original injectors gone. Car runs super.

 

Thanks for that Vader. I also have the book from Parker

 

See the first link in this post:

https://www.thirdgen.org/forums/tpi/...ml#post5962508

I have three FI GM vehicles and it was worth my time/money to put together a kit full of necessary o-rings.