Have most all interior parts in fair shape or better feel free to inquire anything. Have a shed full of parts for this car that im getting rid of. Wiring harness, ecm, engine, trans, accesory belt drive all gone. I have a spare set of rims for sale as well.
These wheels are aluminum but coated with a chrome finish that can be removed with a stiff wire brush its a lot of work but they look good when done. (No this one is not done! Lol)
On the door panels I redid the black section shown with a vinyl fabric. Originally was a soft grey fabric but it had been worn out and discolored

This is the worst wheel of the 4. I removed the tires from the rims a while ago. This picture is old
The dash is currently removed from the car but great care was taken in the removal of it. The cluster is being used elsewhere but there is another one (im unsure of the condition of it) in my shed

 

I also have working flip up headlights and a powerbulge hood for sale, the hood will need some body work and you will have to pick it up. Will ship headlights and pretty much anything else though

 

Hello. Do you still have the car for parts for sale? Interested in the gauge cluster if the lens is not cracked and in good shape.

 

May be interested in the hvac/radio bezel laying on the console if not damaged

 

The bezel was broken sadly. The cluster is in good shape and i can ship. Reads out 155968.9 miles i also have the housing for it if you need

 

 

Can you PM me price shipped to 08005. TY.

 

How much for the headlights shipped to 78521?

 

Price anyway?

 

How much for the center console door/armrest? Are there any flaws that don't show in the pic of the interior?

 

The console is something that I wrapped to match the doors and dash pad. There are some cracks underneath but it was epoxied to strengthen it. In no way is it perfect but its cosmetically and functionally... functional. Especially if you like leather. The material is not leather but it looks like it The epoxy is well hidden and the material used to wrap is tucked neatly and tightly under the plastic

 

As for shipping i will have to go to town monday and see the price for each. I would like 75 for the pair of headlights plus shipping, 20 for the console piece plus shipping and you can have the bezel if you pay the shipping checking on monday all 3 shipping costs. Also Sorry for the delay fellas. I wasnt getting notified of posts for some reason

 

I found some damage to the passenger front headlight housing. The metal trim that holds the lamp in has broken. Looks like a simple small weld job that might cost like 15 bucks or so. Otherwise the headlights are in working order.

The 2 metal tabs are supposed to connect to the silver trim around the headlight. Not sure when they broke but i had replaced the drivers side once before and it wasnt much to it.

 

Heres the radio and heater bezel. One chunk is completely missing.

 

The shipping via ups store is 75 bucks to that zip

 

Shipping on the radio bezel?

 

I need a gray plastic trim piece that holds headliner in the back by the trunk lid. Price and pic to my PM pls shipped to 07092. Thanks