When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I got it done without removing the bracket from the back of the trans - see pics. You need to supoort the rear axle to get it lined back up. I threw some paint on the brackets after grinding off the rivets.
Old insert rubber was pretty hosed
Finished install.
Support the rear axle or you'll never get it lined up.
Always paint bare metal.
After sanding off the rivet head. Used a cold chisel to part the insert from the bracket.
Air powered belt sander makes short work of the rivet heads.
