Members Camaros Post pictures and information about your Third Gen Sport Coupe, Berlinetta, LT, RS, Z28, and IROC-Z28 Camaros!

Project: Yes I Need a 2nd Thirdgen

Thread Tools
 
Search this Thread
 
Old Jul 5, 2017 | 11:39 PM
  #1  
t/aws61985's Avatar
Thread Starter
Senior Member
10 Year Member
Liked
Loved
Community Favorite
iTrader: (2)
 
Joined: Aug 2013
Posts: 621
Likes: 149
From: Chicago
Car: 85-6 TA 85 IROC 82-86 MSE 83 Pace
Engine: Slow ones
Transmission: Noisy ones
Axle/Gears: Weak ones
Project: Yes I Need a 2nd Thirdgen

You know when you see a car on the internet, and say "I really need to buy that". Well, thats exactly what I did. Again.

I tried to find the Highest optioned example of a 85-86 Iroc out there. Its really close, and honestly the best Car I have found so far. So I went with it.

Here it is. 1985 Iroc Z28, Sliver, 305 TPI/700R4, 4 Wheel Disc, 3.42 Posi, Lear Siegler Interior

Every Factory option minus T-Tops, Power Seat, Console Clock, and Rear Defrost (which is rare in its own right I suppose).












The story goes that the Original Owner Only drove the car for a few years. Then started a family, so he parked the car. Time got the best of him, and the car sat for 20+ years in his driveway. His health began to decline so His kids sold the car knowing that he could never truly drive/Restore it. The 2nd owner only had the car a few months before I got my hands on it, and was in the process of restoring it (as you can see in the pictures). The sun really did a number on the paint, and faded the interior a bit but none the less the car is in really good shape. It only has 45,xxx miles. Its all factory down to the wear parts. Still has the retaining washer on the brake rotors. Sadly The Gatorbacks are gone. Not sure what direction I am gonna go with this one. Planing on adding all the options its missing minus the oil cooler,T-Tops, and rear defrost. Thinking All Tubular suspension, And simple improvements along the way as stuff needs to be replaced. With the crazy rising costs of Iroc-Z cars I am happy to get my hands on one with all these options while I still could.
Reply
Old Jul 6, 2017 | 02:47 AM
  #2  
Ghettobird52's Avatar
Supreme Member
 
Joined: Apr 2010
Posts: 1,015
Likes: 5
From: Modesto, California
Car: 88 Firebird Formula
Engine: LO5 5.7 TBI/Ebl Flash
Transmission: 700R4
Axle/Gears: 2.73 stock rear end
Re: Project: Yes I Need a 2nd Thirdgen

Woah love the interior! And yeah i honestly get some impulses as well, unfortunately (or fortunately idk?) my bank doesnt allow it!

Nice grab and man dont we all need a 2nd third gen!!!
Reply
Old Jul 6, 2017 | 11:43 AM
  #3  
Out-Cast's Avatar
Member
iTrader: (1)
 
Joined: May 2015
Posts: 341
Likes: 5
From: Eastern Canada NS
Car: 1987 IROC z
Engine: 350 TPI
Transmission: 700R
Axle/Gears: POSI 3:27s
Re: Project: Yes I Need a 2nd Thirdgen

That would be such a deadly car to restore. Silver is very sharp. And there there's them seats... BAMN
Reply
Old Jul 6, 2017 | 11:49 AM
  #4  
cop332's Avatar
Junior Member
 
Joined: Apr 2012
Posts: 44
Likes: 0
From: Canada
Car: 1984 Trans Am
Engine: 305
Transmission: 700R4
Re: Project: Yes I Need a 2nd Thirdgen

Great deal
Reply
Old Jul 7, 2017 | 08:12 AM
  #5  
fullsize fun's Avatar
Member
 
Joined: Dec 2005
Posts: 174
Likes: 2
From: Shelby,N.C.
Car: 1986 pontiac bonneville
Engine: LB9 305
Transmission: MK6 T5
Axle/Gears: 3.42
Re: Project: Yes I Need a 2nd Thirdgen

I wouldn't paint it, fix the interior bits, and get it in running shape and drive the wheels off it.
Reply
Old Jul 9, 2017 | 09:30 PM
  #6  
DynoDave43's Avatar
Supreme Member
10 Year Member
Liked
Loved
Community Favorite
iTrader: (11)
 
Joined: Aug 2013
Posts: 4,807
Likes: 905
From: MICHIGAN
Car: 1988 Trans Am
Engine: L03
Transmission: 700R4
Axle/Gears: 10 Bolt 2.73 Open
Re: Project: Yes I Need a 2nd Thirdgen

Great find. Congratulations!
Reply
Old Jul 9, 2017 | 09:34 PM
  #7  
chazman's Avatar
Supreme Member
20 Year Member
Liked
Loved
Community Favorite
iTrader: (4)
 
Joined: Dec 2001
Posts: 9,937
Likes: 636
From: Chicagoland
Car: 1989 IROC-Z. Original owner
Engine: LB9. Dual Cats. Big Cam
Transmission: World Class T-5
Axle/Gears: BW 3.45
Re: Project: Yes I Need a 2nd Thirdgen

Fantastic find!
Reply
Old Jul 9, 2017 | 09:36 PM
  #8  
Billgluckman's Avatar
Senior Member
 
Joined: Jan 2015
Posts: 565
Likes: 47
Re: Project: Yes I Need a 2nd Thirdgen

Don't see many silver 3rd gens, nice find.
Reply
Old Jun 15, 2018 | 02:51 AM
  #9  
t/aws61985's Avatar
Thread Starter
Senior Member
10 Year Member
Liked
Loved
Community Favorite
iTrader: (2)
 
Joined: Aug 2013
Posts: 621
Likes: 149
From: Chicago
Car: 85-6 TA 85 IROC 82-86 MSE 83 Pace
Engine: Slow ones
Transmission: Noisy ones
Axle/Gears: Weak ones
Re: Project: Yes I Need a 2nd Thirdgen

Drove the Iroc home from the Barn I rent. Had to get it out of there. For a car that has not seen the road since 89, rolling on firebird PW7 wheels, It felt like the 45k mile car it is. well Until the rad hose blew in the garage. Note the green rag. Radio worked well. Speakers did not like bass at all. But worked none the less. Shield your eyes. Pay no attention to the cobra. This is a thirdgen site lol.




Reply
Old Jun 15, 2018 | 07:46 AM
  #10  
dagwood's Avatar
Supreme Member
Liked
Loved
Community Favorite
Top Answer: 1
iTrader: (5)
 
Joined: Oct 2002
Posts: 2,678
Likes: 1,267
From: In the paint booth!
Car: 1986 Camaro Drag Car
Engine: 383 on Ethanol
Transmission: Automatic
Axle/Gears: 4.86 Currie 9 inch
Re: Project: Yes I Need a 2nd Thirdgen

I absolutely love that thing. Wanna sell it?? It'd look a lot better sitting next to my Z rather than that Mustang lol. Great find!!! And of course, killer color combo! Here's what it needs to be in the garage next to hehe

Reply
Old Jun 15, 2018 | 03:48 PM
  #11  
t/aws61985's Avatar
Thread Starter
Senior Member
10 Year Member
Liked
Loved
Community Favorite
iTrader: (2)
 
Joined: Aug 2013
Posts: 621
Likes: 149
From: Chicago
Car: 85-6 TA 85 IROC 82-86 MSE 83 Pace
Engine: Slow ones
Transmission: Noisy ones
Axle/Gears: Weak ones
Re: Project: Yes I Need a 2nd Thirdgen

I mean everything is for sale for the right price. If you're serious make me an offer.
Reply
Old Jun 15, 2018 | 05:02 PM
  #12  
Richardman1992's Avatar
Junior Member
5 Year Member
Liked
Loved
Community Favorite
 
Joined: Oct 2017
Posts: 69
Likes: 5
From: Davis County, Utah
Car: 2021 LT1
Engine: Lt1
Transmission: Tr6060
Axle/Gears: 3.73
Re: Project: Yes I Need a 2nd Thirdgen

Nice looking Iroc. And hell, third gen site or not, I love the 03-04 cobras! Those cars are mean
Reply
Old May 21, 2021 | 04:53 AM
  #13  
t/aws61985's Avatar
Thread Starter
Senior Member
10 Year Member
Liked
Loved
Community Favorite
iTrader: (2)
 
Joined: Aug 2013
Posts: 621
Likes: 149
From: Chicago
Car: 85-6 TA 85 IROC 82-86 MSE 83 Pace
Engine: Slow ones
Transmission: Noisy ones
Axle/Gears: Weak ones
Re: Project: Yes I Need a 2nd Thirdgen


Been A very long time. Back home for good now. Got the Iroc started up with a new radiator. 1985 one had a very small crack that is getting repaired. Need to keep all the date codes on this one.

New 595 Federals that have been sitting since 2019. But whos keeping track of time?
Reply
Old May 21, 2021 | 05:03 AM
  #14  
t/aws61985's Avatar
Thread Starter
Senior Member
10 Year Member
Liked
Loved
Community Favorite
iTrader: (2)
 
Joined: Aug 2013
Posts: 621
Likes: 149
From: Chicago
Car: 85-6 TA 85 IROC 82-86 MSE 83 Pace
Engine: Slow ones
Transmission: Noisy ones
Axle/Gears: Weak ones
Re: Project: Yes I Need a 2nd Thirdgen


I Really want to Modify this car But not sure If I should. I am having the OE Paint Corrected. I have a Black Bose gold kit, Console clock, 140 "Z28" aftermarket cluster, and a few other period correct goodies like Mr Gasket "Camaro" valve covers and a Grant Console/Shifter lock NOS. With Iroc Prices the way they are, and this being a 45k mile car OE Down to wear parts (minus Battery and Tires), Not sure messing this thing is a good idea.
Reply
Old May 21, 2021 | 09:23 AM
  #15  
ironwill's Avatar
Supreme Member
15 Year Member
 
Joined: Jan 2008
Posts: 1,331
Likes: 565
Car: 1986 IROC Z
Engine: 5.0 TPI
Transmission: 700R4
Axle/Gears: 3.23 Posi
Re: Project: Yes I Need a 2nd Thirdgen

Originally Posted by t/aws61985
I Really want to Modify this car But not sure If I should. I am having the OE Paint Corrected. I have a Black Bose gold kit, Console clock, 140 "Z28" aftermarket cluster, and a few other period correct goodies like Mr Gasket "Camaro" valve covers and a Grant Console/Shifter lock NOS. With Iroc Prices the way they are, and this being a 45k mile car OE Down to wear parts (minus Battery and Tires), Not sure messing this thing is a good idea.
That's a highly-optioned, unmolested car in good condition, and there aren't that many such 3rd gens left. They're only original once.

Whatever you decide, GL.
Reply
Old May 21, 2021 | 07:07 PM
  #16  
DynoDave43's Avatar
Supreme Member
10 Year Member
Liked
Loved
Community Favorite
iTrader: (11)
 
Joined: Aug 2013
Posts: 4,807
Likes: 905
From: MICHIGAN
Car: 1988 Trans Am
Engine: L03
Transmission: 700R4
Axle/Gears: 10 Bolt 2.73 Open
Re: Project: Yes I Need a 2nd Thirdgen

Yeah, but most of the things he's talking about are easily reversible. I say make the changes that make you happy, but keep the originals in case you want / need to switch back.
Reply
Old May 28, 2021 | 10:55 AM
  #17  
zman1969's Avatar
Senior Member
20 Year Member
iTrader: (9)
 
Joined: Jul 2003
Posts: 582
Likes: 205
From: DFW
Car: 90 Formula 350
Engine: 350
Transmission: 700r4
Axle/Gears: Dana 44 3.54
Re: Project: Yes I Need a 2nd Thirdgen

@t/aws61985 WOW! I know a guy DIEING! to get a lear sigler car so if you decide to sell let me know and I'll pass it on but you may not like what he plans to do with it!
really cool find!
Reply
Old May 28, 2021 | 11:13 AM
  #18  
t/aws61985's Avatar
Thread Starter
Senior Member
10 Year Member
Liked
Loved
Community Favorite
iTrader: (2)
 
Joined: Aug 2013
Posts: 621
Likes: 149
From: Chicago
Car: 85-6 TA 85 IROC 82-86 MSE 83 Pace
Engine: Slow ones
Transmission: Noisy ones
Axle/Gears: Weak ones
Re: Project: Yes I Need a 2nd Thirdgen

Originally Posted by zman1969
@t/aws61985 WOW! I know a guy DIEING! to get a lear sigler car so if you decide to sell let me know and I'll pass it on but you may not like what he plans to do with it!
really cool find!
I would sell but it would have to be a real offer. Just cut/buffed the paint and it looks incredible.

Last edited by t/aws61985; May 28, 2021 at 11:16 AM.
Reply
Old May 28, 2021 | 03:04 PM
  #19  
zman1969's Avatar
Senior Member
20 Year Member
iTrader: (9)
 
Joined: Jul 2003
Posts: 582
Likes: 205
From: DFW
Car: 90 Formula 350
Engine: 350
Transmission: 700r4
Axle/Gears: Dana 44 3.54
Re: Project: Yes I Need a 2nd Thirdgen

Originally Posted by t/aws61985
I would sell but it would have to be a real offer. Just cut/buffed the paint and it looks incredible.
sent you a PM on this

cut and buff? hood looks really thin to start
Reply
Old May 29, 2021 | 09:33 PM
  #20  
t/aws61985's Avatar
Thread Starter
Senior Member
10 Year Member
Liked
Loved
Community Favorite
iTrader: (2)
 
Joined: Aug 2013
Posts: 621
Likes: 149
From: Chicago
Car: 85-6 TA 85 IROC 82-86 MSE 83 Pace
Engine: Slow ones
Transmission: Noisy ones
Axle/Gears: Weak ones
Re: Project: Yes I Need a 2nd Thirdgen


I didn't go too hard. Paint had heavy oxidation due to sitting.

Last edited by t/aws61985; Jul 7, 2022 at 10:16 PM.
Reply
Old May 29, 2021 | 09:35 PM
  #21  
t/aws61985's Avatar
Thread Starter
Senior Member
10 Year Member
Liked
Loved
Community Favorite
iTrader: (2)
 
Joined: Aug 2013
Posts: 621
Likes: 149
From: Chicago
Car: 85-6 TA 85 IROC 82-86 MSE 83 Pace
Engine: Slow ones
Transmission: Noisy ones
Axle/Gears: Weak ones
Re: Project: Yes I Need a 2nd Thirdgen


Came out really nice. The paint on the car clearly has issues. But I do not plan to paint it. At least for awhile.
Reply
Old Jun 1, 2021 | 06:45 PM
  #22  
t/aws61985's Avatar
Thread Starter
Senior Member
10 Year Member
Liked
Loved
Community Favorite
iTrader: (2)
 
Joined: Aug 2013
Posts: 621
Likes: 149
From: Chicago
Car: 85-6 TA 85 IROC 82-86 MSE 83 Pace
Engine: Slow ones
Transmission: Noisy ones
Axle/Gears: Weak ones
Re: Project: Yes I Need a 2nd Thirdgen


Some of the bulbs in the dash were burnt out. Replaced with new LEDs. One of the only changes made by the first owner was a 86 and up 145 speedo. I swapped it out for a period correct 140 "Z28". The 145 was jumping and the 140 is too. Gonna have to dig into it.
Reply
Old Jun 1, 2021 | 06:49 PM
  #23  
t/aws61985's Avatar
Thread Starter
Senior Member
10 Year Member
Liked
Loved
Community Favorite
iTrader: (2)
 
Joined: Aug 2013
Posts: 621
Likes: 149
From: Chicago
Car: 85-6 TA 85 IROC 82-86 MSE 83 Pace
Engine: Slow ones
Transmission: Noisy ones
Axle/Gears: Weak ones
Re: Project: Yes I Need a 2nd Thirdgen


Took the car to Thirdgen Fest this year. My first year. Also brought the 86 Bird
Reply
Old Jun 1, 2021 | 06:50 PM
  #24  
t/aws61985's Avatar
Thread Starter
Senior Member
10 Year Member
Liked
Loved
Community Favorite
iTrader: (2)
 
Joined: Aug 2013
Posts: 621
Likes: 149
From: Chicago
Car: 85-6 TA 85 IROC 82-86 MSE 83 Pace
Engine: Slow ones
Transmission: Noisy ones
Axle/Gears: Weak ones
Re: Project: Yes I Need a 2nd Thirdgen


Gonna install these tonight.
Reply
Old Jun 26, 2021 | 06:15 PM
  #25  
t/aws61985's Avatar
Thread Starter
Senior Member
10 Year Member
Liked
Loved
Community Favorite
iTrader: (2)
 
Joined: Aug 2013
Posts: 621
Likes: 149
From: Chicago
Car: 85-6 TA 85 IROC 82-86 MSE 83 Pace
Engine: Slow ones
Transmission: Noisy ones
Axle/Gears: Weak ones
Re: Project: Yes I Need a 2nd Thirdgen



Finally added my NOS "Z28" Splash guards to the car. Just the rear for now as I'm waiting on parts. Too lazy to let the car down just to put it back up. Also got a new TPI emblem for the rear bumper. Huge in comparison to the OE badge. Looks good though.
Reply
Old Jun 26, 2021 | 06:27 PM
  #26  
t/aws61985's Avatar
Thread Starter
Senior Member
10 Year Member
Liked
Loved
Community Favorite
iTrader: (2)
 
Joined: Aug 2013
Posts: 621
Likes: 149
From: Chicago
Car: 85-6 TA 85 IROC 82-86 MSE 83 Pace
Engine: Slow ones
Transmission: Noisy ones
Axle/Gears: Weak ones
Re: Project: Yes I Need a 2nd Thirdgen


Added the correct power seat/seat bezel on the LS seats. The Recaro Cars used this same version. Very hard to come by. Been collecting them for years.

Added the center console clock. Had to cut the holes for the switches. Honestly need to invest in a good Dremel. Had the Harbor freight version for years. PSA don't try to heat up the Seconds arm to bed it back into place. Doesn't turn out well. Had to murder two clocks to make one. Came out good with the repainted red needle. Even the connector was connected to the harness.

I have had this for years NOS. Its made by grant for the Camaros. Never seen another like it, but I'm sure some of the old timers on here have. honestly a very strong piece.

Found one of the 2 build sheets on the car too. Under the passenger's seat.
Reply
Old Aug 21, 2021 | 12:44 AM
  #27  
t/aws61985's Avatar
Thread Starter
Senior Member
10 Year Member
Liked
Loved
Community Favorite
iTrader: (2)
 
Joined: Aug 2013
Posts: 621
Likes: 149
From: Chicago
Car: 85-6 TA 85 IROC 82-86 MSE 83 Pace
Engine: Slow ones
Transmission: Noisy ones
Axle/Gears: Weak ones
Re: Project: Yes I Need a 2nd Thirdgen


New speakers

New spekaers

Redid the headliner myself.

2 months later got the front mud flaps on

lastly the door moldings are back on. Looking proper now
Reply
Old Aug 21, 2021 | 12:44 AM
  #28  
t/aws61985's Avatar
Thread Starter
Senior Member
10 Year Member
Liked
Loved
Community Favorite
iTrader: (2)
 
Joined: Aug 2013
Posts: 621
Likes: 149
From: Chicago
Car: 85-6 TA 85 IROC 82-86 MSE 83 Pace
Engine: Slow ones
Transmission: Noisy ones
Axle/Gears: Weak ones
Re: Project: Yes I Need a 2nd Thirdgen

Just a small update on things I have done
Reply
Old Jul 3, 2022 | 12:52 AM
  #29  
t/aws61985's Avatar
Thread Starter
Senior Member
10 Year Member
Liked
Loved
Community Favorite
iTrader: (2)
 
Joined: Aug 2013
Posts: 621
Likes: 149
From: Chicago
Car: 85-6 TA 85 IROC 82-86 MSE 83 Pace
Engine: Slow ones
Transmission: Noisy ones
Axle/Gears: Weak ones
Re: Project: Yes I Need a 2nd Thirdgen


Added a 5in rear wing. This is the showcars brand off ebay. Total piece of crap cannot stress this enough. No mounting provisions whatsoever. I had to fiberglass some in. Still not done with it. But its on there. Also added some cregar rear window louvers.
Reply
Old Jul 3, 2022 | 12:55 AM
  #30  
t/aws61985's Avatar
Thread Starter
Senior Member
10 Year Member
Liked
Loved
Community Favorite
iTrader: (2)
 
Joined: Aug 2013
Posts: 621
Likes: 149
From: Chicago
Car: 85-6 TA 85 IROC 82-86 MSE 83 Pace
Engine: Slow ones
Transmission: Noisy ones
Axle/Gears: Weak ones
Re: Project: Yes I Need a 2nd Thirdgen


Replaced the beat to death hood louvers with some Trac Spec louvers. Was super easy to cut the hood.
Reply
Old Jul 3, 2022 | 01:05 AM
  #31  
t/aws61985's Avatar
Thread Starter
Senior Member
10 Year Member
Liked
Loved
Community Favorite
iTrader: (2)
 
Joined: Aug 2013
Posts: 621
Likes: 149
From: Chicago
Car: 85-6 TA 85 IROC 82-86 MSE 83 Pace
Engine: Slow ones
Transmission: Noisy ones
Axle/Gears: Weak ones
Re: Project: Yes I Need a 2nd Thirdgen


Picked up a set of 18in ZR1 corvette Repops with fresh tires for a steal. $400 well spent.

Reply
Old Jul 3, 2022 | 01:12 AM
  #32  
t/aws61985's Avatar
Thread Starter
Senior Member
10 Year Member
Liked
Loved
Community Favorite
iTrader: (2)
 
Joined: Aug 2013
Posts: 621
Likes: 149
From: Chicago
Car: 85-6 TA 85 IROC 82-86 MSE 83 Pace
Engine: Slow ones
Transmission: Noisy ones
Axle/Gears: Weak ones
Re: Project: Yes I Need a 2nd Thirdgen

I have a Nos Hurst Duel Gate shifter I am planning to install soon. Also need to fix the driving lights. But my Daytona is getting attention currently.
Reply
Old Jul 3, 2022 | 05:08 PM
  #33  
blackgloves's Avatar
Senior Member
20 Year Member
Liked
Loved
 
Joined: Dec 2004
Posts: 570
Likes: 69
From: TEXAS
Car: 1987 IROC-Z
Engine: 6.2L
Transmission: Stage III T56
Axle/Gears: 3.73
Re: Project: Yes I Need a 2nd Thirdgen

Sharp looking car. Its good to see you still own it and are enjoying it.
Reply
Old Jul 5, 2022 | 12:02 PM
  #34  
Carlos89's Avatar
Member
 
Joined: Sep 2018
Posts: 170
Likes: 42
From: Miami, FL
Car: 1986 Trans Am
Engine: 5.0 LG4 4BBL
Transmission: T5 5-Speed
Axle/Gears: 3.23
Re: Project: Yes I Need a 2nd Thirdgen

Originally Posted by t/aws61985
Picked up a set of 18in ZR1 corvette Repops with fresh tires for a steal. $400 well spent.
$400???? That's a felony
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
88IROCvertZ
Members Camaros
12
Aug 3, 2018 11:17 AM
JohnFB
Members Camaros
10
Jun 28, 2017 07:25 PM
Stock87ROC
Camaros for Sale
25
Jun 1, 2017 12:07 AM
BADNBLK
Auto Detailing and Appearance
77
Jul 13, 2014 04:37 PM
JeepOnRock
Members Camaros
8
Dec 4, 2011 04:57 PM




All times are GMT -5. The time now is 09:05 PM.