Interior plastics/parts blowout

Thread Tools
 
Search this Thread
 
Old Apr 30, 2013 | 06:24 PM
  #1  
beths91camaro's Avatar
Thread Starter
Member
iTrader: (35)
 
Joined: Jan 2012
Posts: 225
Likes: 6
From: Gunnison Co
Car: 87 Iroc vert, t-top
Engine: 305
Transmission: 700R4
Interior plastics/parts blowout

I'm getting too many interior plastics stacked in the garage.
I have lots of black and gray, some flame red, and carmine red.
I have a couple of privacy covers in black.
Let me know what you need.
Will post up pictures as needed.
I realize shipping on some pieces will be more than others, but will do my best to work with you.
Reply
Old Apr 30, 2013 | 09:02 PM
  #2  
t-top havoc's Avatar
Supreme Member
iTrader: (3)
 
Joined: Jun 2009
Posts: 2,350
Likes: 3
From: Mid West
Car: '87 Camaro
Engine: '92 Carb'd 350
Transmission: 700r4
Axle/Gears: factory stock
Re: Interior plastics/parts blowout

Driver side power seat plastic--

Rails covers, sliders covers, bolt covers--
Black, '87 ( Camaro )
Basically everything except the hinge cover & switch cover.

If you have them, asking price??

Thank You For Your Time
Reply
Old Apr 30, 2013 | 10:55 PM
  #3  
Camaroz2892's Avatar
Junior Member
iTrader: (2)
 
Joined: Oct 2008
Posts: 92
Likes: 0
From: New Brunswick, NJ
Car: 92 Camaro Z28
Engine: 305 TPI
Transmission: T-5
Re: Interior plastics/parts blowout

Im looking for the RHS black interior speaker region plastic. How far from philly are you and what would be your price?
Reply
Old Apr 30, 2013 | 11:20 PM
  #4  
Javier87z28's Avatar
Senior Member
iTrader: (1)
 
Joined: Dec 2012
Posts: 753
Likes: 1
From: San Antonio, Texas
Car: 1987 Camaro Z28, 1989 TTA #922
Engine: lb9, 3.8L turbo
Transmission: 700r4, 2004R
Re: Interior plastics/parts blowout

Have any tan items?
Reply
Old May 1, 2013 | 11:17 AM
  #5  
beths91camaro's Avatar
Thread Starter
Member
iTrader: (35)
 
Joined: Jan 2012
Posts: 225
Likes: 6
From: Gunnison Co
Car: 87 Iroc vert, t-top
Engine: 305
Transmission: 700R4
Re: Interior plastics/parts blowout

Originally Posted by t-top havoc
Driver side power seat plastic--

Rails covers, sliders covers, bolt covers--
Black, '87 ( Camaro )
Basically everything except the hinge cover & switch cover.

If you have them, asking price??

Thank You For Your Time
I know I have the slider and bolt covers- let me check on the rest.

Originally Posted by Camaroz2892
Im looking for the RHS black interior speaker region plastic. How far from philly are you and what would be your price?
I'm about 2.5 hours away from Philly. $20?
Originally Posted by Javier87z28
Have any tan items?
That is one color I don't have right now, sorry.
Reply
Old May 1, 2013 | 03:23 PM
  #6  
Javier87z28's Avatar
Senior Member
iTrader: (1)
 
Joined: Dec 2012
Posts: 753
Likes: 1
From: San Antonio, Texas
Car: 1987 Camaro Z28, 1989 TTA #922
Engine: lb9, 3.8L turbo
Transmission: 700r4, 2004R
Re: Interior plastics/parts blowout

Thanks anyways
Reply
Old May 3, 2013 | 01:23 AM
  #7  
garagepro's Avatar
Junior Member
iTrader: (1)
 
Joined: Nov 2012
Posts: 4
Likes: 0
From: Mooresville NC
Car: '86 Iroc
Engine: 305 TPI
Transmission: 5-speed
Axle/Gears: 3.23
Re: Interior plastics/parts blowout

Looking for plastic trim at rear of headliner and headliner seat belt guides (gray or black) shipped 28117.
Reply
Old May 3, 2013 | 08:28 AM
  #8  
EvelBist's Avatar
Member
10 Year Member
iTrader: (1)
 
Joined: Feb 2013
Posts: 153
Likes: 0
From: Tijeras, NM
Car: 89 Black GTA
Engine: 'close to' stock 5.7 but trending>>
Transmission: 700
Axle/Gears: 3.27
Re: Interior plastics/parts blowout

both sides rear plastic speaker covers? cloth condition/color doesnt matter, i'll redo them.
Reply
Old May 4, 2013 | 10:36 PM
  #9  
NASCAR's Avatar
Junior Member
10 Year Member
 
Joined: Sep 2011
Posts: 13
Likes: 0
From: Gonzales La.
Car: 89iroc/03dakota
Engine: 350&4.7
Transmission: auto
Axle/Gears: 2:77 & 3:55
Re: Interior plastics/parts blowout

Originally Posted by beths91camaro
I'm getting too many interior plastics stacked in the garage.
I have lots of black and gray, some flame red, and carmine red.
I have a couple of privacy covers in black.
Let me know what you need.
Will post up pictures as needed.
I realize shipping on some pieces will be more than others, but will do my best to work with you.



Looking for a pillar molding right side black. Zip 70737 La.
Reply
Old May 5, 2013 | 02:37 AM
  #10  
ThePain's Avatar
Senior Member
 
Joined: Jul 2008
Posts: 623
Likes: 13
From: Alaska
Car: 1992 RS
Transmission: Automatic
Re: Interior plastics/parts blowout

flame red carpet kick panels?
Flame red trunk plastics?
Reply
Old May 5, 2013 | 08:06 AM
  #11  
dennisbernal91z's Avatar
Supreme Member
20 Year Member
Liked
Loved
Community Favorite
iTrader: (2)
 
Joined: Feb 2005
Posts: 4,506
Likes: 92
From: West Warwick RI, postal code: 02893
Car: Building LS3, T56 Z28
Engine: LS3
Transmission: T-56
Axle/Gears: Moser/ 4.11
Re: Interior plastics/parts blowout

Looking for an entire black interior panel set, from trunk to dash. Don't need door panels. Have anything that could help me out?
Reply
Old May 5, 2013 | 07:26 PM
  #12  
Oddball's Avatar
Member
 
Joined: Jun 2003
Posts: 149
Likes: 0
From: South Jersey
Car: '86 IROC-Z
Engine: LG4 305-4BBL
Transmission: T5
Re: Interior plastics/parts blowout

Hi,

I am looking for a complete interior plastic set in black, preferably with the carpet (deluxe) option. This is going into an 86. What do you have?
Reply
Old May 5, 2013 | 07:30 PM
  #13  
91rscammie's Avatar
Member
iTrader: (2)
 
Joined: Feb 2010
Posts: 112
Likes: 0
From: Northern NY
Car: 91rs,00outback,02f150screw rip wrx
Engine: lo3, 2.5,330ci
Transmission: 700r4
Axle/Gears: 2.73
Re: Interior plastics/parts blowout

Do you have any 90-92 Camaro auto shift plates? What kind of condition(Cracks, signs of wear, etc)? Can I get some pictures? How much to 13667? Thanks
Reply
Old May 6, 2013 | 12:21 PM
  #14  
Tcformula350's Avatar
Junior Member
 
Joined: Sep 2012
Posts: 7
Likes: 0
From: Traverse city mi
Car: 1989 Pontiac firebird formula350
Engine: L98 5.7 350
Transmission: 700r4
Re: Interior plastics/parts blowout

Do you have a center console lid? Driver side lower dash panel in black? rear privacy slide out? Michigan 49690
Reply
Old May 7, 2013 | 11:07 AM
  #15  
Johnny Blaze's Avatar
Supreme Member
iTrader: (15)
 
Joined: Oct 2003
Posts: 3,449
Likes: 5
From: Charlestown, IN
Car: 1971 Camaro
Engine: 427
Transmission: TKO600
Axle/Gears: 3.73
Re: Interior plastics/parts blowout

Looking for Black sill plates for an 88.
Reply
Old May 14, 2013 | 06:04 PM
  #16  
beths91camaro's Avatar
Thread Starter
Member
iTrader: (35)
 
Joined: Jan 2012
Posts: 225
Likes: 6
From: Gunnison Co
Car: 87 Iroc vert, t-top
Engine: 305
Transmission: 700R4
Re: Interior plastics/parts blowout

Originally Posted by NASCAR
Looking for a pillar molding right side black. Zip 70737 La.
PM sent.
Originally Posted by ThePain
flame red carpet kick panels?
Flame red trunk plastics?
Speaker holder area, passenger side, and rear trunk panel for a t top car.
Originally Posted by dennisbernal91z
Looking for an entire black interior panel set, from trunk to dash. Don't need door panels. Have anything that could help me out?
Let me get home two parts cars this weekend, both of which have black interior, and I know I can
Originally Posted by Oddball
Hi,

I am looking for a complete interior plastic set in black, preferably with the carpet (deluxe) option. This is going into an 86. What do you have?
Been chatting with you- don't have the carpeted kind.
Originally Posted by 91rscammie
Do you have any 90-92 Camaro auto shift plates? What kind of condition(Cracks, signs of wear, etc)? Can I get some pictures? How much to 13667? Thanks
I don't at the moment.
Originally Posted by Tcformula350
Do you have a center console lid? Driver side lower dash panel in black? rear privacy slide out? Michigan 49690
I will have two presentable console lids this weekend. What year for lower dash panel in black? Yes I have a privacy covers- vinyl or cloth?
Originally Posted by Johnny Blaze
Looking for Black sill plates for an 88.
Will have a set this weekend.

Sorry it took me so long to get back to you guys- my littlest guy was diagnosed with Lyme disease on the third, and I didn't get on here much.
Reply
Old May 15, 2013 | 09:10 AM
  #17  
86WS6's Avatar
Supreme Member
iTrader: (1)
 
Joined: Jul 2007
Posts: 1,263
Likes: 3
From: Great Smoky Mountains, Bryson City North Carolina
Car: 86WS6 30K and 82WS7 24K
Engine: 86:305 TPI, 82: 305 LG4
Transmission: 86:700R4, 82: T200C
Axle/Gears: 86:3:27 9 bolt, 82: 3:23 10 bolt
Re: Interior plastics/parts blowout

I need a set of door sills for a 82-83 thirdgen. The 82 & 83 models have the seat belt retractor in the roof, and are different from the 84 to 92.
Reply
Old May 15, 2013 | 09:38 AM
  #18  
Johnny Blaze's Avatar
Supreme Member
iTrader: (15)
 
Joined: Oct 2003
Posts: 3,449
Likes: 5
From: Charlestown, IN
Car: 1971 Camaro
Engine: 427
Transmission: TKO600
Axle/Gears: 3.73
Re: Interior plastics/parts blowout

Originally Posted by 86WS6
I need a set of door sills for a 82-83 thirdgen. The 82 & 83 models have the seat belt retractor in the roof, and are different from the 84 to 92.
I think i still have a set of those, got them for my 88 before I realized they didn't fit. I'll check tonight. If the op does not have the ones you need.
Reply
Old May 15, 2013 | 09:49 AM
  #19  
Javier87z28's Avatar
Senior Member
iTrader: (1)
 
Joined: Dec 2012
Posts: 753
Likes: 1
From: San Antonio, Texas
Car: 1987 Camaro Z28, 1989 TTA #922
Engine: lb9, 3.8L turbo
Transmission: 700r4, 2004R
Re: Interior plastics/parts blowout

let me know if you get any tan beechwood cars
Reply
Old May 15, 2013 | 03:15 PM
  #20  
beths91camaro's Avatar
Thread Starter
Member
iTrader: (35)
 
Joined: Jan 2012
Posts: 225
Likes: 6
From: Gunnison Co
Car: 87 Iroc vert, t-top
Engine: 305
Transmission: 700R4
Re: Interior plastics/parts blowout

Originally Posted by 86WS6
I need a set of door sills for a 82-83 thirdgen. The 82 & 83 models have the seat belt retractor in the roof, and are different from the 84 to 92.
Those I don't have, sorry.
Originally Posted by Javier87z28
let me know if you get any tan beechwood cars
I will have you first on my list if I do. So far I haven't come across one.
Reply
Old May 15, 2013 | 09:36 PM
  #21  
Reddeath210's Avatar
Member
iTrader: (1)
 
Joined: Feb 2011
Posts: 166
Likes: 0
From: USA
Re: Interior plastics/parts blowout

anything trans am or firebird?
Reply
Old May 16, 2013 | 06:25 PM
  #22  
beths91camaro's Avatar
Thread Starter
Member
iTrader: (35)
 
Joined: Jan 2012
Posts: 225
Likes: 6
From: Gunnison Co
Car: 87 Iroc vert, t-top
Engine: 305
Transmission: 700R4
Re: Interior plastics/parts blowout

Originally Posted by Reddeath210
anything trans am or firebird?
A few things- what are you looking for?
Would love to have more, but haven't come across any good parts Firebird cars lately......
Reply
Old May 16, 2013 | 06:42 PM
  #23  
BADNBLK's Avatar
COTM Editor
iTrader: (11)
 
Joined: Mar 2006
Posts: 4,098
Likes: 14
From: WINDSOR, CO
Car: 91 Z28, 87 SC, 90 IROC, 92 RS
Engine: LS1, 305 TPI, L98, NADA
Transmission: T56, 700r4's, and NADA
Axle/Gears: 3.89, 3.42, 3.23, NADA
Re: Interior plastics/parts blowout

Still looking for that good dash pad Beth
Reply
Old May 16, 2013 | 09:07 PM
  #24  
Reddeath210's Avatar
Member
iTrader: (1)
 
Joined: Feb 2011
Posts: 166
Likes: 0
From: USA
Re: Interior plastics/parts blowout

@beth the better question is what dont i need
Reply
Old May 17, 2013 | 12:04 PM
  #25  
513camarors91's Avatar
Junior Member
iTrader: (1)
 
Joined: Aug 2011
Posts: 43
Likes: 0
From: cincinnati ohio
Car: 91 camaro rs
Engine: ls6
Transmission: mn12
Axle/Gears: s60 3.73
Re: Interior plastics/parts blowout

looking for black rear headliner platic that goes side to side thats not cracked or the screw have pulled though..price
Reply
Old May 17, 2013 | 03:48 PM
  #26  
beths91camaro's Avatar
Thread Starter
Member
iTrader: (35)
 
Joined: Jan 2012
Posts: 225
Likes: 6
From: Gunnison Co
Car: 87 Iroc vert, t-top
Engine: 305
Transmission: 700R4
Re: Interior plastics/parts blowout

Originally Posted by BADNBLK
Still looking for that good dash pad Beth
Got one in one of the parts cars coming in this weekend- you get first chance to get it!
Originally Posted by Reddeath210
@beth the better question is what dont i need
What color, and what year? Some of the parts are interchangeable between Camaro/Firebird.
Originally Posted by 513camarors91
looking for black rear headliner platic that goes side to side thats not cracked or the screw have pulled though..price
Will check and see if I have a good one once the cars get here this weekend.
Reply
Old May 17, 2013 | 10:51 PM
  #27  
Reddeath210's Avatar
Member
iTrader: (1)
 
Joined: Feb 2011
Posts: 166
Likes: 0
From: USA
Re: Interior plastics/parts blowout

@beths looking for black, and need most interior pieces, maybe even a center console lid
Reply
Old May 18, 2013 | 07:00 AM
  #28  
Oddball's Avatar
Member
 
Joined: Jun 2003
Posts: 149
Likes: 0
From: South Jersey
Car: '86 IROC-Z
Engine: LG4 305-4BBL
Transmission: T5
Re: Interior plastics/parts blowout

I hear gray is a very attractive color in third gens. Yeah go gray. Beth needs more gray customers.
Reply
Old May 18, 2013 | 07:17 AM
  #29  
beths91camaro's Avatar
Thread Starter
Member
iTrader: (35)
 
Joined: Jan 2012
Posts: 225
Likes: 6
From: Gunnison Co
Car: 87 Iroc vert, t-top
Engine: 305
Transmission: 700R4
Re: Interior plastics/parts blowout

Originally Posted by Oddball
I hear gray is a very attractive color in third gens. Yeah go gray. Beth needs more gray customers.
LOL!!! Thanks, Josh!
Reply
Old May 18, 2013 | 07:26 AM
  #30  
beths91camaro's Avatar
Thread Starter
Member
iTrader: (35)
 
Joined: Jan 2012
Posts: 225
Likes: 6
From: Gunnison Co
Car: 87 Iroc vert, t-top
Engine: 305
Transmission: 700R4
Re: Interior plastics/parts blowout

http://s1140.photobucket.com/user/sl...library/garage
Here's a couple of pics of my garage- my shelving units aren't finished quite yet, but all those are filled with Camaro parts- I sorted and organized them about 2 weeks ago. You can't see the rafters filled with sill plates, consoles, bumpers, chin spoilers, etc......
Reply
Old May 18, 2013 | 05:07 PM
  #31  
Reddeath210's Avatar
Member
iTrader: (1)
 
Joined: Feb 2011
Posts: 166
Likes: 0
From: USA
Re: Interior plastics/parts blowout

Where in NE PA are u located?
Reply
Old May 18, 2013 | 07:17 PM
  #32  
beths91camaro's Avatar
Thread Starter
Member
iTrader: (35)
 
Joined: Jan 2012
Posts: 225
Likes: 6
From: Gunnison Co
Car: 87 Iroc vert, t-top
Engine: 305
Transmission: 700R4
Re: Interior plastics/parts blowout

Originally Posted by Reddeath210
Where in NE PA are u located?
I live in a smaller town- Meshoppen- we're about an hour from Binghamton, 40 minutes from Clarks Summit, about the same from Wilkes Barre.
It would probably be worth your drive if you are looking for a good number of items, or we're willing to meet....
Reply
Old May 18, 2013 | 08:14 PM
  #33  
THEBEAST84's Avatar
Member
15 Year Member
iTrader: (2)
 
Joined: Jan 2008
Posts: 189
Likes: 0
From: Tallahassee, Fl
Car: 84 z28 h.o./ 92 rs
Engine: 305 h/o /3.1 v6
Transmission: hybird turbo 350/t5 bog warner
Axle/Gears: non posi 3.73 / ls 3.42
Re: Interior plastics/parts blowout

Looking for a nice set of grey sunvisers with a mirror let me know what ya have thanks in advance !
Reply
Old May 18, 2013 | 09:58 PM
  #34  
haflingerheaven's Avatar
Junior Member
 
Joined: Nov 2007
Posts: 26
Likes: 0
Re: Interior plastics/parts blowout

hi...looking for a nice radio bezel for an 83...it has to be near perfect...also looking for nice sill plates for the same year...thx alot
Reply
Old May 19, 2013 | 06:58 AM
  #35  
beths91camaro's Avatar
Thread Starter
Member
iTrader: (35)
 
Joined: Jan 2012
Posts: 225
Likes: 6
From: Gunnison Co
Car: 87 Iroc vert, t-top
Engine: 305
Transmission: 700R4
Re: Interior plastics/parts blowout

Originally Posted by THEBEAST84
Looking for a nice set of grey sunvisers with a mirror let me know what ya have thanks in advance !
Let me see what I have- I know I have some nice ones, not sure if I have any with mirrors.
Originally Posted by haflingerheaven
hi...looking for a nice radio bezel for an 83...it has to be near perfect...also looking for nice sill plates for the same year...thx alot
If you're talking about the one that goes around the radio/heater control, I know I have one that's really nice.
Don't have sill plates, though.
Reply
Old May 19, 2013 | 09:13 PM
  #36  
subedriver's Avatar
Junior Member
 
Joined: Jan 2009
Posts: 60
Likes: 0
From: Wichita, KS
Re: Interior plastics/parts blowout

looking for a 5spd shift plate for camaro, don't care what color the 5spd lettering is on it. zip code is 67133
Reply
Old May 21, 2013 | 08:52 AM
  #37  
89gta383's Avatar
TGO Supporter
25 Year Member
iTrader: (5)
 
Joined: Feb 2000
Posts: 1,855
Likes: 13
From: St. Augustine, FL
Car: 89 GTA
Engine: 383
Transmission: 4L80E
Axle/Gears: 12 bolt-3.73
Re: Interior plastics/parts blowout

I need 2 center console lids-gray interior, shipped to 32092
Reply
Old May 21, 2013 | 09:34 AM
  #38  
87Iroc5.0's Avatar
Junior Member
10 Year Member
iTrader: (4)
 
Joined: Aug 2012
Posts: 76
Likes: 4
From: Chicago- West Suburbs
Car: 1990 GTA
Engine: 355
Transmission: T-56
Axle/Gears: 3.90
Re: Interior plastics/parts blowout

How about a light grey T top headliner for an 89' GTA? Good condition?
Reply
Old May 21, 2013 | 11:30 AM
  #39  
beths91camaro's Avatar
Thread Starter
Member
iTrader: (35)
 
Joined: Jan 2012
Posts: 225
Likes: 6
From: Gunnison Co
Car: 87 Iroc vert, t-top
Engine: 305
Transmission: 700R4
Re: Interior plastics/parts blowout

Originally Posted by 89gta383
I need 2 center console lids-gray interior, shipped to 32092
All I have for console lids are two Camaro ones.
Originally Posted by 87Iroc5.0
How about a light grey T top headliner for an 89' GTA? Good condition?
I have yet to find one in good condition! Round these parts, we get the soaking rains, and it doesn't take long to make a mess of them.
Reply
Old May 21, 2013 | 12:39 PM
  #40  
KWIK84's Avatar
Senior Member
iTrader: (5)
 
Joined: May 2005
Posts: 831
Likes: 1
From: Midwest IL
Car: 1984 Z28
Engine: Alky 360
Transmission: TH400, Freakshow 9.5"
Axle/Gears: 9" 4.71
Re: Interior plastics/parts blowout

I am looking for a passenger kick panel, color is not a worry.
Reply
Old Jun 5, 2013 | 05:12 PM
  #41  
beths91camaro's Avatar
Thread Starter
Member
iTrader: (35)
 
Joined: Jan 2012
Posts: 225
Likes: 6
From: Gunnison Co
Car: 87 Iroc vert, t-top
Engine: 305
Transmission: 700R4
Re: Interior plastics/parts blowout

Originally Posted by KWIK84
I am looking for a passenger kick panel, color is not a worry.
Have several- I'm assuming you want one without carpet?
Reply
Old Jul 11, 2013 | 02:32 PM
  #42  
slvrblt383's Avatar
Junior Member
10 Year Member
 
Joined: Apr 2010
Posts: 6
Likes: 0
From: Buffalo, NY
Car: 1986 Z28
Engine: 383 TPI
Transmission: T56
Axle/Gears: 4.10
Re: Interior plastics/parts blowout

Do you have Carmine seat belts that aren't broken and cracked. Specifically the female end that bolts to the floor. I need one for the rear and the two front pieces
Reply
Old Jul 11, 2013 | 03:10 PM
  #43  
jazzdadss's Avatar
Senior Member
15 Year Member
 
Joined: Dec 2009
Posts: 702
Likes: 4
From: Texas
Car: 1989 IROC LSX
Engine: Swapped LS6 Forged by LME
Transmission: 4L65E
Axle/Gears: 3.73
Re: Interior plastics/parts blowout

Still looking for that dash Beth, Let me know if you run across one.
Reply
Old Jul 11, 2013 | 04:03 PM
  #44  
anstor's Avatar
Junior Member
 
Joined: Apr 2013
Posts: 1
Likes: 0
From: Ypers Belgium
Car: Firebird 1988 Black
Engine: 2800cc V6
Transmission: Auto
Axle/Gears: 5
Re: Interior plastics/parts blowout

Hi, I'm looking for a front bumper trim- piece/part. Is the bumper shown in your fotoalbum (garage) from a Firebird?

It' an inlay for an3rd Gen pontiac 1988 i'm looking for. The trim/piece located at the front passenger side.
Reply
Old Jul 12, 2013 | 08:44 PM
  #45  
joe69formula's Avatar
Junior Member
 
Joined: May 2011
Posts: 18
Likes: 0
From: Turnersville, NJ
Car: 69 GTO, 92 Formula
Re: Interior plastics/parts blowout

do you have gray or black (gray preferred ) front seat belt receivers ?
Reply
Old Jul 13, 2013 | 05:19 AM
  #46  
blakbird89's Avatar
Banned
 
Joined: Dec 2007
Posts: 122
Likes: 0
From: Auburn, ME
Car: "Nina" 1988 Trans Am GTA
Engine: TPI 305 V8
Transmission: T-5
Re: Interior plastics/parts blowout

Hi Beth, happen to have a manual shift plate? How much shipped to 04210?

Thanks,
Jack
Reply
Old Jul 15, 2013 | 09:06 AM
  #47  
EvelBist's Avatar
Member
10 Year Member
iTrader: (1)
 
Joined: Feb 2013
Posts: 153
Likes: 0
From: Tijeras, NM
Car: 89 Black GTA
Engine: 'close to' stock 5.7 but trending>>
Transmission: 700
Axle/Gears: 3.27
Re: Interior plastics/parts blowout

those buttons on the seat sides?
Reply
Old Jul 15, 2013 | 11:37 AM
  #48  
Justin93's Avatar
Junior Member
 
Joined: Jul 2012
Posts: 68
Likes: 0
From: San Jose, CA
Car: 1991 RS
Engine: 5.0 TBI H.O. soon to be LS3 6.2l
Transmission: 700r4 - Soon to be T56
Axle/Gears: Moser 9" LSD, 3.54 Gears
Re: Interior plastics/parts blowout

Originally Posted by Oddball
I hear gray is a very attractive color in third gens. Yeah go gray. Beth needs more gray customers.
I can use some assistance with this! Hopefully you'll have some with no scratches and just only need a clean up

Do you have any good condition driver/passenger side seat belts? such as no bowing of the holster where the clicker rests. Mines all ripped up and im trying to restore my camaro inside out.

Also other Grey parts of interest

Slide cover for the rear lift support T50 Bolt, Its a grey circle cap that goes over the bolt.

Driver side Seat belt, hell if you have good condition seat belt retractors in grey with no scratches ill probably take both!

Also looking for Sail panels but not to hard as there 65$ for the backing and new material included

I have the medium grey interior kit, but if you have any of the track covers (black trim pieces that go under the bucket seats) in nice condition (no scratches visible flaws, dirt is acceptable) I would like them for both.

Im also interested in Grey T-Top shade covers as well, i DO NOT have the C&C T-Tops so it would be the standard ones i believe are 28" maybe someone else can chime in for this.

I also need all the Grey interior screws that screw the plastic compartment panels in the rear.

If you have the light mechanism inside the rear cargo hatch i would also take that, not the lense but mechanism.

Trying to think of what else i may need but this will begin my list of interior grey parts! i dont know if there in junked condition or rescued/parts car so if you can also disclose that would help alot !

Of course i would prefer to buy as a lot to make shipping easier on both of our cases.

Also if you happen to have the 4 screws for both Seatbelt Guideplates (driver+passenger side) i would love those as i've been using different length self tapping screws

i know this is a long message but feel free to PM me and ill give you all my details Shipping Zip, Parts of interest, Paypal.

Thanks for your time Beth!
Reply
Old Jul 15, 2013 | 01:15 PM
  #49  
89' firehawk's Avatar
Member
iTrader: (6)
 
Joined: Jun 2013
Posts: 109
Likes: 0
From: Buckeye,Az (aka lower san deigo)
Car: '89/'91 firehawk#25-R
Engine: 5.7
Transmission: auto 700r4(gathering 6spd parts
Axle/Gears: dana 44 9-bolt 3.54
Re: Interior plastics/parts blowout

Looking for Gray driverside sill plate for my 89 formula....lmk if you have anything...thx
Reply
Old Jul 16, 2013 | 08:50 AM
  #50  
beths91camaro's Avatar
Thread Starter
Member
iTrader: (35)
 
Joined: Jan 2012
Posts: 225
Likes: 6
From: Gunnison Co
Car: 87 Iroc vert, t-top
Engine: 305
Transmission: 700R4
Re: Interior plastics/parts blowout

Originally Posted by jazzdadss
Still looking for that dash Beth, Let me know if you run across one.
I have your phone number- so when I finally get one that's good, you'll be the first to know!
Originally Posted by anstor
Hi, I'm looking for a front bumper trim- piece/part. Is the bumper shown in your fotoalbum (garage) from a Firebird?

It' an inlay for an3rd Gen pontiac 1988 i'm looking for. The trim/piece located at the front passenger side.
Bumper was partially damaged- I'll look and see if I have the piece.
Originally Posted by joe69formula
do you have gray or black (gray preferred ) front seat belt receivers ?
I have black front receivers, uncracked, I just have to find time to install the new buttons so they work properly.
Originally Posted by blakbird86
Hi Beth, happen to have a manual shift plate? How much shipped to 04210?

Thanks,
Jack
I don't at teh moment.
Originally Posted by EvelBist
those buttons on the seat sides?
Power seat buttons? Or something else?
Originally Posted by Justin93
I can use some assistance with this! Hopefully you'll have some with no scratches and just only need a clean up

Do you have any good condition driver/passenger side seat belts? such as no bowing of the holster where the clicker rests. Mines all ripped up and im trying to restore my camaro inside out.

Also other Grey parts of interest

Slide cover for the rear lift support T50 Bolt, Its a grey circle cap that goes over the bolt.

Driver side Seat belt, hell if you have good condition seat belt retractors in grey with no scratches ill probably take both!

Also looking for Sail panels but not to hard as there 65$ for the backing and new material included

I have the medium grey interior kit, but if you have any of the track covers (black trim pieces that go under the bucket seats) in nice condition (no scratches visible flaws, dirt is acceptable) I would like them for both.

Im also interested in Grey T-Top shade covers as well, i DO NOT have the C&C T-Tops so it would be the standard ones i believe are 28" maybe someone else can chime in for this.

I also need all the Grey interior screws that screw the plastic compartment panels in the rear.

If you have the light mechanism inside the rear cargo hatch i would also take that, not the lense but mechanism.

Trying to think of what else i may need but this will begin my list of interior grey parts! i dont know if there in junked condition or rescued/parts car so if you can also disclose that would help alot !

Of course i would prefer to buy as a lot to make shipping easier on both of our cases.

Also if you happen to have the 4 screws for both Seatbelt Guideplates (driver+passenger side) i would love those as i've been using different length self tapping screws

i know this is a long message but feel free to PM me and ill give you all my details Shipping Zip, Parts of interest, Paypal.

Thanks for your time Beth!
I'm gonna PM you- I believe I have the bulk of what you are looking for. I try to get the best items I can find.
Originally Posted by 89' firehawk
Looking for Gray driverside sill plate for my 89 formula....lmk if you have anything...thx
I don't have a good driver's side one, sorry. Unless my husband put some in a different place than normal.
Going to a big swap meet- Super Chevy at Maple Grove Raceway this weekend- will be there with all the parts.

Last edited by beths91camaro; Jul 16, 2013 at 09:23 AM.
Reply



All times are GMT -5. The time now is 10:00 AM.