[GA] Parting out 1984 camaro Z28

Thread Tools
 
Search this Thread
 
Old May 14, 2015 | 02:00 AM
  #1  
Night rider327's Avatar
Thread Starter
Supreme Member
iTrader: (13)
 
Joined: Dec 2002
Posts: 2,535
Likes: 17
From: Bowdon, GA.
Car: 1988 Camaro
Engine: 355, 10.34:1, 249/252 @.050", IK200
Transmission: TH-400, 3500 stall 9.5" converter
Axle/Gears: Ford 9", detroit locker, 3.89 gears
Parting out 1984 camaro Z28

Parting out 1984 Z28.
I can not ship the large heavy parts like engine, hood, doors, hatch, etc. Local pickup only on those items.

I take paypal, and ship most items usps priority mail

Running, non smoking engine, bad transmission. Will sell parts off engine like carb, dist., brackets, etc.
LG4 305, Cat delete flowmaster exhaust

Dash pad is cracked

Name:  0429151710-00_zps9l6wtoru.jpg
Views: 304
Size:  191.8 KB

Name:  0429151710-03_zpsnjqoln3z.jpg
Views: 243
Size:  273.5 KB



Name:  IMG_0477_zpssmmlpmpy.jpg
Views: 136
Size:  302.0 KB



Name:  IMG_0517_zpshfcn9htq.jpg
Views: 128
Size:  200.6 KB


[URL=http://s1083.photobucket.com/user/NightRider327/media/1984%20camaro%20Z28%20%20%20Parting%20out/IMG_0516_zps7snd2bqc.jpg.html]

Name:  IMG_0515_zps7xq2oira.jpg
Views: 124
Size:  234.9 KB

Name:  IMG_0520_zpsjompkzyt.jpg
Views: 182
Size:  209.7 KB

Name:  IMG_0524_zpsptjtpsal.jpg
Views: 164
Size:  219.3 KB

Name:  IMG_0484_zpsveafx5iu.jpg
Views: 145
Size:  180.4 KB

Name:  IMG_0518_zpsjwwctemy.jpg
Views: 159
Size:  232.7 KB

Last edited by Night rider327; May 14, 2015 at 02:12 AM.
Reply
Old May 14, 2015 | 01:39 PM
  #2  
kitt23's Avatar
Member
iTrader: (4)
 
Joined: May 2010
Posts: 196
Likes: 2
Re: Parting out 1984 camaro Z28

can you take a picture of the shifter mechanism/assembly?
Reply
Old May 14, 2015 | 03:53 PM
  #3  
Night rider327's Avatar
Thread Starter
Supreme Member
iTrader: (13)
 
Joined: Dec 2002
Posts: 2,535
Likes: 17
From: Bowdon, GA.
Car: 1988 Camaro
Engine: 355, 10.34:1, 249/252 @.050", IK200
Transmission: TH-400, 3500 stall 9.5" converter
Axle/Gears: Ford 9", detroit locker, 3.89 gears
Re: Parting out 1984 camaro Z28

Yeah sure thing. It will be later tonight when can have time to do it for you.
Reply
Old May 14, 2015 | 11:50 PM
  #4  
punkmaster98's Avatar
Supreme Member
10 Year Member
Liked
Loved
Community Favorite
iTrader: (5)
 
Joined: Aug 2011
Posts: 1,266
Likes: 203
From: Jackson NJ
Car: 1984 T/A
Engine: LQ4
Transmission: T56
Axle/Gears: Ford 8.8 4.10 gears
Re: Parting out 1984 camaro Z28

LG4 engine harness?
Reply
Old May 14, 2015 | 11:56 PM
  #5  
Night rider327's Avatar
Thread Starter
Supreme Member
iTrader: (13)
 
Joined: Dec 2002
Posts: 2,535
Likes: 17
From: Bowdon, GA.
Car: 1988 Camaro
Engine: 355, 10.34:1, 249/252 @.050", IK200
Transmission: TH-400, 3500 stall 9.5" converter
Axle/Gears: Ford 9", detroit locker, 3.89 gears
Re: Parting out 1984 camaro Z28

Here is the shifter pictures

[URL=http://s1083.photobucket.com/user/NightRider327/media/Parts%20for%20sale/IMG_7645_zpsboosse6n.jpg.html][/URL





Reply
Old May 15, 2015 | 12:20 AM
  #6  
Night rider327's Avatar
Thread Starter
Supreme Member
iTrader: (13)
 
Joined: Dec 2002
Posts: 2,535
Likes: 17
From: Bowdon, GA.
Car: 1988 Camaro
Engine: 355, 10.34:1, 249/252 @.050", IK200
Transmission: TH-400, 3500 stall 9.5" converter
Axle/Gears: Ford 9", detroit locker, 3.89 gears
Re: Parting out 1984 camaro Z28

Originally Posted by punkmaster98
LG4 engine harness?
Yes I have it. All of the wiring I seen is in good shape. I noticed 2 splices and 1 broke wire when I pulled the engine out. Have not pulled the looms off.

Which harness are you referring too. It's my understanding that there is 3 harness under the hood. 1 for the ECM, 1 for the engine and 1 for the headlights and all.

By "engine harness" I take it as the engine harness and ECM harness with out the ECM

If so how does $125 shipped sound

Name:  IMG_7646_zpsxeufbm0a.jpg
Views: 117
Size:  264.5 KB

Name:  IMG_7647_zps8tb61hc0.jpg
Views: 127
Size:  274.4 KB

Last edited by Night rider327; May 15, 2015 at 12:29 AM.
Reply
Old May 22, 2015 | 04:08 PM
  #7  
Coolball's Avatar
Junior Member
iTrader: (5)
 
Joined: May 2010
Posts: 37
Likes: 1
Car: 82' Z28
Engine: 5.7L 350
Transmission: ST10
Axle/Gears: 3.42
Re: Parting out 1984 camaro Z28

How's the lower chin spoiler, any damage besides the missing paint? I'd also be interested in the drivers side lower ground effect in good shape.

Edit: Are the fog lights in tact? Need those too.

Last edited by Coolball; May 22, 2015 at 04:12 PM.
Reply
Old May 22, 2015 | 06:39 PM
  #8  
Night rider327's Avatar
Thread Starter
Supreme Member
iTrader: (13)
 
Joined: Dec 2002
Posts: 2,535
Likes: 17
From: Bowdon, GA.
Car: 1988 Camaro
Engine: 355, 10.34:1, 249/252 @.050", IK200
Transmission: TH-400, 3500 stall 9.5" converter
Axle/Gears: Ford 9", detroit locker, 3.89 gears
Re: Parting out 1984 camaro Z28

Chain spoiler is broke on pass. front corner.

Driver side ground effect is good. $55 per piece + shipping on the side ground effects

No fog lights


Name:  IMG_0504_zpsj8xj1g7i.jpg
Views: 145
Size:  255.9 KB

Name:  0429151711-00_zpspxl6yz6s.jpg
Views: 184
Size:  244.8 KB
Reply
Old May 30, 2015 | 07:21 PM
  #9  
z-fastest's Avatar
Junior Member
 
Joined: Feb 2004
Posts: 1
Likes: 0
Re: Parting out 1984 camaro Z28

I would like to know if the passenger side door and drivers did fender and nose are available. Also I know you mentioned you can't ship heavy items so I would like to know what state the car is located in. I am in central nj and am willing to travel a reasonable distance.
Thanks in advance.
Reply
Old May 30, 2015 | 07:43 PM
  #10  
Night rider327's Avatar
Thread Starter
Supreme Member
iTrader: (13)
 
Joined: Dec 2002
Posts: 2,535
Likes: 17
From: Bowdon, GA.
Car: 1988 Camaro
Engine: 355, 10.34:1, 249/252 @.050", IK200
Transmission: TH-400, 3500 stall 9.5" converter
Axle/Gears: Ford 9", detroit locker, 3.89 gears
Re: Parting out 1984 camaro Z28

Yes all of those parts are still available, but I'm in Georgia so quite a ways from you.
Reply
Old May 30, 2015 | 07:57 PM
  #11  
z-fastest's Avatar
Junior Member
 
Joined: Feb 2004
Posts: 1
Likes: 0
Re: Parting out 1984 camaro Z28

Yes that is quite as ways away. Thanks you anyway. I have an 84 z-28 same color and all.
Reply
Old May 31, 2015 | 12:15 AM
  #12  
Night rider327's Avatar
Thread Starter
Supreme Member
iTrader: (13)
 
Joined: Dec 2002
Posts: 2,535
Likes: 17
From: Bowdon, GA.
Car: 1988 Camaro
Engine: 355, 10.34:1, 249/252 @.050", IK200
Transmission: TH-400, 3500 stall 9.5" converter
Axle/Gears: Ford 9", detroit locker, 3.89 gears
Re: Parting out 1984 camaro Z28

Your welcome, Sorry I wasn't able to help you out. I will make you an offer. I don't want to deal with shipping/boxing, etc but if YOU wanted to set up and pay a crate/freight company. I would be willing to pull the parts and hand them over to the shipping company for them to package and ship. I did this once a long time ago with a man in Norway on some corvette parts he bought from me through Ebay. IIRC we used craters and freighters out of Atlanta, GA.

If you are interested in that, just PM me and we can talk prices and parts needed.
Reply
Old May 31, 2015 | 06:01 PM
  #13  
z-fastest's Avatar
Junior Member
 
Joined: Feb 2004
Posts: 1
Likes: 0
Re: Parting out 1984 camaro Z28

I appreciate the offer and the info. I just don't know if it would be worth it. I'm sure it would be costly to ship just because of the size and weight. I would be looking for a door,a fender, the nose and possibly the flow master exhaust. The weight of this items I'm sure would make it very costly.
Reply
Old Jun 3, 2015 | 01:52 PM
  #14  
LittleFranks's Avatar
Junior Member
10 Year Member
iTrader: (2)
 
Joined: Aug 2014
Posts: 54
Likes: 1
From: South Florida
Car: 92 Z28 Hawaiian Orchid
Engine: L98
Transmission: 700r4
Axle/Gears: 3.23 Posi
Re: Parting out 1984 camaro Z28

center console lid ? From what I can see the leather looks to be in good shape but how about the release/ lock button and plastic underneath ?
If you can send pictures to my email, that would be awesome.
( Frankpav4@gmail.com )

Thanks
- Frank
Reply
Old Jun 4, 2015 | 04:35 PM
  #15  
Night rider327's Avatar
Thread Starter
Supreme Member
iTrader: (13)
 
Joined: Dec 2002
Posts: 2,535
Likes: 17
From: Bowdon, GA.
Car: 1988 Camaro
Engine: 355, 10.34:1, 249/252 @.050", IK200
Transmission: TH-400, 3500 stall 9.5" converter
Axle/Gears: Ford 9", detroit locker, 3.89 gears
Re: Parting out 1984 camaro Z28

Console lid has been sold already.

I have another one from another camaro but in poor cond. The vinyl on top looks good, button is good but plastic under bottom is all busted up.
Reply
Old Jun 4, 2015 | 06:15 PM
  #16  
PurelyPMD's Avatar
Supreme Member
10 Year Member
iTrader: (3)
 
Joined: Jan 2013
Posts: 3,038
Likes: 52
From: Newtown, CT
Car: 1987 IROC Original Owner
Engine: LB9
Transmission: M39 MM5
Axle/Gears: G80 G92 J65
Re: Parting out 1984 camaro Z28

Grills in the front bumper? Shipped to 06482?
Reply
Old Jun 5, 2015 | 01:05 AM
  #17  
Night rider327's Avatar
Thread Starter
Supreme Member
iTrader: (13)
 
Joined: Dec 2002
Posts: 2,535
Likes: 17
From: Bowdon, GA.
Car: 1988 Camaro
Engine: 355, 10.34:1, 249/252 @.050", IK200
Transmission: TH-400, 3500 stall 9.5" converter
Axle/Gears: Ford 9", detroit locker, 3.89 gears
Re: Parting out 1984 camaro Z28

Originally Posted by PurelyPMD
Grills in the front bumper? Shipped to 06482?
Sorry they are gone
Reply
Old Jun 5, 2015 | 12:30 PM
  #18  
-=Z28=-'s Avatar
Supreme Member
iTrader: (3)
 
Joined: Mar 2015
Posts: 1,072
Likes: 48
From: Minnesota
Car: 84 Z28
Engine: 383 Stroker
Transmission: 700R4
Axle/Gears: 3.73
Re: Parting out 1984 camaro Z28

How about a bag of bolts and screws... Interior screws (any you can get your hands on, Dash,center concle, any interior screws/hardware) Exterior G/Eff screws, fender bolts, hood/latch bolts... 55331 if youd be interested...Sense the bolts/screws arnt worth much, and your time is id be willing to work on a fair price for you... Let me know. Thanks.

-Dan
Reply
Old Jun 5, 2015 | 02:51 PM
  #19  
Night rider327's Avatar
Thread Starter
Supreme Member
iTrader: (13)
 
Joined: Dec 2002
Posts: 2,535
Likes: 17
From: Bowdon, GA.
Car: 1988 Camaro
Engine: 355, 10.34:1, 249/252 @.050", IK200
Transmission: TH-400, 3500 stall 9.5" converter
Axle/Gears: Ford 9", detroit locker, 3.89 gears
Re: Parting out 1984 camaro Z28

Sure thing I can get you all the screws and bolts you need. You gave me a pretty good list already. Let me know if there is anymore you need. Also shoot me a PM with a price that you have in mind. Like I said I can pretty much get you every bolt on the car.

Shipping wise I think USPS flat rate box would be the best/cheapest being bolts/screws can add up to a lot of weight fast, and up to 70 lbs ships for one rate if it fits in the box
Reply
Old Jun 15, 2015 | 02:41 AM
  #20  
Night rider327's Avatar
Thread Starter
Supreme Member
iTrader: (13)
 
Joined: Dec 2002
Posts: 2,535
Likes: 17
From: Bowdon, GA.
Car: 1988 Camaro
Engine: 355, 10.34:1, 249/252 @.050", IK200
Transmission: TH-400, 3500 stall 9.5" converter
Axle/Gears: Ford 9", detroit locker, 3.89 gears
Re: Parting out 1984 camaro Z28

Bump
Reply
Old Jul 27, 2015 | 12:05 PM
  #21  
ur7x's Avatar
Member
iTrader: (2)
 
Joined: Feb 2007
Posts: 165
Likes: 0
Car: 83 Z28, 87 442 (Sold)
Engine: 5.0, 5.7,
Transmission: 4 Speed autos
Re: Parting out 1984 camaro Z28

Looking for a 82-84 z28 Driver's side (LH) quarter panel ground effects trim piece (The little one back by the rear bumper). Looking for a nice one with the tabs intact.

Do you have one? Condition? Price shipped to Point Roberts (98281) please...

Also would be interested in a "frequent customer" discount

And just to be fair to you, I'm looking local too... So don't pull it (if you haven't already) Thanks

Last edited by ur7x; Jul 27, 2015 at 12:37 PM.
Reply
Old Jul 27, 2015 | 11:28 PM
  #22  
Night rider327's Avatar
Thread Starter
Supreme Member
iTrader: (13)
 
Joined: Dec 2002
Posts: 2,535
Likes: 17
From: Bowdon, GA.
Car: 1988 Camaro
Engine: 355, 10.34:1, 249/252 @.050", IK200
Transmission: TH-400, 3500 stall 9.5" converter
Axle/Gears: Ford 9", detroit locker, 3.89 gears
Re: Parting out 1984 camaro Z28

LOL, I like that "frequent customer" discount. I do have one and looking from the outside of the car it looks great but I have not looked under the bottom or removed it yet.

I will be at the point of removing it in a day or two, and can let you know then. I'm trying to price my parts at about 1/2 of what hawks charges. He wants $75 for that piece... Being you are a good "frequent customer" how does $25 plus shipping sound, if it is good?
Reply
Old Oct 23, 2015 | 02:40 AM
  #23  
Night rider327's Avatar
Thread Starter
Supreme Member
iTrader: (13)
 
Joined: Dec 2002
Posts: 2,535
Likes: 17
From: Bowdon, GA.
Car: 1988 Camaro
Engine: 355, 10.34:1, 249/252 @.050", IK200
Transmission: TH-400, 3500 stall 9.5" converter
Axle/Gears: Ford 9", detroit locker, 3.89 gears
Re: Parting out 1984 camaro Z28

bump
Reply
Old Oct 28, 2015 | 05:29 PM
  #24  
jayonemo's Avatar
Junior Member
 
Joined: Aug 2013
Posts: 30
Likes: 0
From: Zachary Louisiana
Engine: 355
Transmission: 350
Axle/Gears: 342
Re: Parting out 1984 camaro Z28

how much for the covers over the shock towers frt shipped to 70791
Reply
Old Oct 30, 2015 | 12:37 AM
  #25  
Night rider327's Avatar
Thread Starter
Supreme Member
iTrader: (13)
 
Joined: Dec 2002
Posts: 2,535
Likes: 17
From: Bowdon, GA.
Car: 1988 Camaro
Engine: 355, 10.34:1, 249/252 @.050", IK200
Transmission: TH-400, 3500 stall 9.5" converter
Axle/Gears: Ford 9", detroit locker, 3.89 gears
Re: Parting out 1984 camaro Z28

Originally Posted by jayonemo
how much for the covers over the shock towers frt shipped to 70791
Sorry I missed this post. PM sent
Reply
Old Oct 30, 2015 | 04:35 PM
  #26  
qward22's Avatar
Junior Member
 
Joined: Mar 2015
Posts: 8
Likes: 0
Re: Parting out 1984 camaro Z28

How much for the door panels both and trunk struts to hold up trunk
Reply
Old Oct 30, 2015 | 05:14 PM
  #27  
qward22's Avatar
Junior Member
 
Joined: Mar 2015
Posts: 8
Likes: 0
Re: Parting out 1984 camaro Z28

How much for the exhaust system with tips
Reply
Old Oct 30, 2015 | 05:29 PM
  #28  
Night rider327's Avatar
Thread Starter
Supreme Member
iTrader: (13)
 
Joined: Dec 2002
Posts: 2,535
Likes: 17
From: Bowdon, GA.
Car: 1988 Camaro
Engine: 355, 10.34:1, 249/252 @.050", IK200
Transmission: TH-400, 3500 stall 9.5" converter
Axle/Gears: Ford 9", detroit locker, 3.89 gears
Re: Parting out 1984 camaro Z28

$80 for pair door panels (w/o any trim or plastic top rails)
$20 for pair hatch struts
$200 for exhaust system

I can't ship the exhaust system, but if you are local, you are more than welcome to come by and check it out and pick it up.
Reply
Old Oct 30, 2015 | 05:45 PM
  #29  
qward22's Avatar
Junior Member
 
Joined: Mar 2015
Posts: 8
Likes: 0
Re: Parting out 1984 camaro Z28

What about with trim and plastic top pieces and I'm about 3 hrs away in Augusta how much to ship struts and door panels.
Reply
Old Oct 30, 2015 | 11:44 PM
  #30  
Night rider327's Avatar
Thread Starter
Supreme Member
iTrader: (13)
 
Joined: Dec 2002
Posts: 2,535
Likes: 17
From: Bowdon, GA.
Car: 1988 Camaro
Engine: 355, 10.34:1, 249/252 @.050", IK200
Transmission: TH-400, 3500 stall 9.5" converter
Axle/Gears: Ford 9", detroit locker, 3.89 gears
Re: Parting out 1984 camaro Z28

I get $35 each for the door panel top rails, and $10 each for the plastic trim panel around door panel, lock, arm rest mount.

If you are interested in the exhaust system, door panels, rails, trims, and hatch strut, I could work out a slight deal with you on all of those items... Of course pickup only.

I will check on the shipping for the panels and struts.
Reply
Old Oct 31, 2015 | 04:48 AM
  #31  
qward22's Avatar
Junior Member
 
Joined: Mar 2015
Posts: 8
Likes: 0
Re: Parting out 1984 camaro Z28

OK cool just let me know on that shipping
Reply
Old Nov 9, 2015 | 09:48 PM
  #32  
BobKnake's Avatar
Junior Member
 
Joined: Oct 2015
Posts: 40
Likes: 0
From: Havana, IL
Car: 1985 z-28
Engine: 305 5.0 LG4
Transmission: 700r4
Re: Parting out 1984 camaro Z28

I am looking for the piece that I circled...
also looking for the one under the car (front bumper to the radiator mount base)... I'm guessing it's probably the air dam deflector...

Oh, and I'm also looking for the screws that keep the rear panels in place in the rear... Missing a couple on my z.

How much to 62644?



Last edited by BobKnake; Nov 9, 2015 at 09:54 PM.
Reply
Old Nov 9, 2015 | 11:24 PM
  #33  
Night rider327's Avatar
Thread Starter
Supreme Member
iTrader: (13)
 
Joined: Dec 2002
Posts: 2,535
Likes: 17
From: Bowdon, GA.
Car: 1988 Camaro
Engine: 355, 10.34:1, 249/252 @.050", IK200
Transmission: TH-400, 3500 stall 9.5" converter
Axle/Gears: Ford 9", detroit locker, 3.89 gears
Re: Parting out 1984 camaro Z28

Let me check on those parts for you. I know I have the plastic tray thing you have circled, I should have an air dam as well, and I think I have those rear panel screws
Reply
Old Nov 11, 2015 | 07:59 AM
  #34  
Daslapper88's Avatar
Want a title? Post!
iTrader: (1)
 
Joined: Sep 2012
Posts: 0
Likes: 0
From: Patterson ca
Car: 1988 iroc z
Engine: 350 l98
Transmission: 700r4
Axle/Gears: 9 bolt 3.73
Re: Parting out 1984 camaro Z28

do you still have the engine wiring harness
Reply
Old Nov 11, 2015 | 02:25 PM
  #35  
Night rider327's Avatar
Thread Starter
Supreme Member
iTrader: (13)
 
Joined: Dec 2002
Posts: 2,535
Likes: 17
From: Bowdon, GA.
Car: 1988 Camaro
Engine: 355, 10.34:1, 249/252 @.050", IK200
Transmission: TH-400, 3500 stall 9.5" converter
Axle/Gears: Ford 9", detroit locker, 3.89 gears
Re: Parting out 1984 camaro Z28

Originally Posted by Daslapper88
do you still have the engine wiring harness
Yes sir, I have all of the wiring.. Which part of the "engine wiring" do you need. As you may know under hood wiring is 3 parts. Computer/ecu harness, body harness to lights and what not, and the engine harness it's self.
Reply
Old Nov 13, 2015 | 09:16 AM
  #36  
Daslapper88's Avatar
Want a title? Post!
iTrader: (1)
 
Joined: Sep 2012
Posts: 0
Likes: 0
From: Patterson ca
Car: 1988 iroc z
Engine: 350 l98
Transmission: 700r4
Axle/Gears: 9 bolt 3.73
Re: Parting out 1984 camaro Z28

the engine harness itself shipped to 95363
Reply
Old Nov 13, 2015 | 09:44 AM
  #37  
qward22's Avatar
Junior Member
 
Joined: Mar 2015
Posts: 8
Likes: 0
Re: Parting out 1984 camaro Z28

How much is it to ship black door panels, both top rails to 30813 and do you have any t top headliner?
Reply
Old Nov 15, 2015 | 04:39 PM
  #38  
Night rider327's Avatar
Thread Starter
Supreme Member
iTrader: (13)
 
Joined: Dec 2002
Posts: 2,535
Likes: 17
From: Bowdon, GA.
Car: 1988 Camaro
Engine: 355, 10.34:1, 249/252 @.050", IK200
Transmission: TH-400, 3500 stall 9.5" converter
Axle/Gears: Ford 9", detroit locker, 3.89 gears
Re: Parting out 1984 camaro Z28

Originally Posted by Daslapper88
the engine harness itself shipped to 95363
Sorry for the delay. I caught the flu and have been out of commission. PM sent
Reply
Old Nov 15, 2015 | 04:45 PM
  #39  
Night rider327's Avatar
Thread Starter
Supreme Member
iTrader: (13)
 
Joined: Dec 2002
Posts: 2,535
Likes: 17
From: Bowdon, GA.
Car: 1988 Camaro
Engine: 355, 10.34:1, 249/252 @.050", IK200
Transmission: TH-400, 3500 stall 9.5" converter
Axle/Gears: Ford 9", detroit locker, 3.89 gears
Re: Parting out 1984 camaro Z28

Originally Posted by qward22
How much is it to ship black door panels, both top rails to 30813 and do you have any t top headliner?
Sorry for the long delay.. This flu has kicked my butt!

Bare with me, and I will get you the shipping quote soon. I have to go measure and weigh the parts
Reply
Old Nov 15, 2015 | 06:21 PM
  #40  
kitt23's Avatar
Member
iTrader: (4)
 
Joined: May 2010
Posts: 196
Likes: 2
Re: Parting out 1984 camaro Z28

Great seller !!!
Reply
Old Nov 16, 2015 | 05:19 PM
  #41  
Night rider327's Avatar
Thread Starter
Supreme Member
iTrader: (13)
 
Joined: Dec 2002
Posts: 2,535
Likes: 17
From: Bowdon, GA.
Car: 1988 Camaro
Engine: 355, 10.34:1, 249/252 @.050", IK200
Transmission: TH-400, 3500 stall 9.5" converter
Axle/Gears: Ford 9", detroit locker, 3.89 gears
Re: Parting out 1984 camaro Z28

Originally Posted by qward22
How much is it to ship black door panels, both top rails to 30813 and do you have any t top headliner?
Shipping will be $65

Door panels $80
Top rails $70

Total $215 shipped

Sorry, I do not have any good headliners.

BTW... I wanted to point out, these are not true "Black" door panels. They are more dark charcoal from the way my eyes sees them.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
colton_carlson
Firebirds for Sale
7
Mar 8, 2019 12:21 PM
84z96L31vortec
Tech / General Engine
7
Aug 20, 2017 12:16 AM
greeny
Wheels and Tires
1
Aug 12, 2015 03:55 PM
84z96L31vortec
North East Region
1
Aug 10, 2015 08:27 PM
1nastygta
Firebirds for Sale
2
Aug 8, 2015 07:38 PM




All times are GMT -5. The time now is 03:33 PM.