383/TH350
Thread Starter
Senior Member
iTrader: (1)
Joined: Jan 2009
Posts: 959
Likes: 0
From: Houston TX
Car: 02 SS
Engine: 408 TT (1108rw-93/m1)6700rpm
Transmission: TH400(slipping)
Axle/Gears: 12bolt/3.42(whines😠)
383/TH350
Have a low miles
383 sbc with iron heads, mild cam,
hei distributor
Edelbrock dual plane intake
Edelbrock hi rise cast aluminum valve covers
Holley 650carb
Custom billet.pullies.6rib serpentine accessory drive
Th350 with 2500 stall tq converter
selling complete carb to oil pan with trans attached.
This engine trans combo pulls hard in my c10 all steel truck.
It runs hard, pulls hard,sounds excellent idle/wot.
Currently installed in.my truck.
Serious buyers can view and possible drive. Asking 3500$
Drop in anything sbc powered and go.
I would say it feels just as powerful as my 400rw 00 camaro ss
In a way heavier truck.
I also got a steel driveshaft and tq arm for use with th350 B&M swap kit for 3rd gens
150$ for tq arm and driveshaft.
Drop the motor/trans and tq arm/driveshaft in ur 3rd gen fbody.
And go run next to ls cars :J
Located in Houston
Pm if interested
383 sbc with iron heads, mild cam,
hei distributor
Edelbrock dual plane intake
Edelbrock hi rise cast aluminum valve covers
Holley 650carb
Custom billet.pullies.6rib serpentine accessory drive
Th350 with 2500 stall tq converter
selling complete carb to oil pan with trans attached.
This engine trans combo pulls hard in my c10 all steel truck.
It runs hard, pulls hard,sounds excellent idle/wot.
Currently installed in.my truck.
Serious buyers can view and possible drive. Asking 3500$
Drop in anything sbc powered and go.
I would say it feels just as powerful as my 400rw 00 camaro ss
In a way heavier truck.
I also got a steel driveshaft and tq arm for use with th350 B&M swap kit for 3rd gens
150$ for tq arm and driveshaft.
Drop the motor/trans and tq arm/driveshaft in ur 3rd gen fbody.
And go run next to ls cars :J
Located in Houston
Pm if interested
Last edited by NemeSS-TyranT; Aug 30, 2012 at 04:17 PM.
Thread Starter
Senior Member
iTrader: (1)
Joined: Jan 2009
Posts: 959
Likes: 0
From: Houston TX
Car: 02 SS
Engine: 408 TT (1108rw-93/m1)6700rpm
Transmission: TH400(slipping)
Axle/Gears: 12bolt/3.42(whines😠)
Re: 383/TH350
excellent running engine. fires right up. completely streetable.
Thread Starter
Senior Member
iTrader: (1)
Joined: Jan 2009
Posts: 959
Likes: 0
From: Houston TX
Car: 02 SS
Engine: 408 TT (1108rw-93/m1)6700rpm
Transmission: TH400(slipping)
Axle/Gears: 12bolt/3.42(whines😠)
Re: 383/TH350
Turn key motor and trans.
Not someone elses left over or aborted project
Installation available for a fair rate
Not someone elses left over or aborted project
Installation available for a fair rate
Senior Member
Joined: Sep 2009
Posts: 614
Likes: 0
From: who knows
Car: '90 Camaro
Engine: 305 tbi
Transmission: T5
Axle/Gears: 9 bolt posi 373
Re: 383/TH350
If I was back in tx I would buy it!! I'm in ga for ait school for the army. Idk when ill be back in tx.. How many miles on it, when was it rebuilt, and was it ran hard during it life, regular oil changes? Oh and how much just for the engine?
Thread Starter
Senior Member
iTrader: (1)
Joined: Jan 2009
Posts: 959
Likes: 0
From: Houston TX
Car: 02 SS
Engine: 408 TT (1108rw-93/m1)6700rpm
Transmission: TH400(slipping)
Axle/Gears: 12bolt/3.42(whines😠)
Re: 383/TH350
back up for sale.
i also have a stage 2 fbody tq arm.tail 700r4 transmission.
rated to 500hp w 2500 stall tq converter.
can sell the 383 w or w/o the transmissions.
pm for more info if interested. good running motor and transmissions.
regular oil changes.
bout 6k miles on motor and th350
1000 miles on 700r4 and tq converter
i also have a stage 2 fbody tq arm.tail 700r4 transmission.
rated to 500hp w 2500 stall tq converter.
can sell the 383 w or w/o the transmissions.
pm for more info if interested. good running motor and transmissions.
regular oil changes.
bout 6k miles on motor and th350
1000 miles on 700r4 and tq converter
Thread
Thread Starter
Forum
Replies
Last Post
DENALI
Suspension and Chassis
4
Aug 17, 2013 08:41 PM
