any mississippi peeps
#52
Senior Member
iTrader: (2)
Join Date: Oct 1999
Location: Hattiesburg, MS, USA
Posts: 893
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1992 Jade Green---Trans Am Converti
Engine: LS1
Transmission: T56
Re: any mississippi peeps
If the track is open, parking anywhere is no problem. Of course we might think about a different site that we wouldn't have to pay to get in to or deal with a lot of people. The gates don't open until 3:00PM on Sundays and I'm not sure if they are open on Saturday's without an event.
If we do it on Sunday we could use the parking lot in front of where I work. It's pretty cleared out on Sunday's and right in front of Walmart. Hell for that matter any parking lot on USM is going to be clear Saturday and Sunday.
Kevin D.
If we do it on Sunday we could use the parking lot in front of where I work. It's pretty cleared out on Sunday's and right in front of Walmart. Hell for that matter any parking lot on USM is going to be clear Saturday and Sunday.
Kevin D.
#54
Supreme Member
iTrader: (3)
Join Date: Jan 2006
Location: Flowood,MS
Posts: 1,489
Likes: 0
Received 0 Likes
on
0 Posts
Car: 87 IROC Z
Engine: 5.7 L98 TPI
Transmission: 700r4,2500 stall
Axle/Gears: G80,10 bolt 3.42's
Re: any mississippi peeps
I can be off for sat or sun.Is there any events on sunday or is it open for test and tune.Is the track there 1/8th or 1/4.It would be cool if there wasnt an event so we could run all we wanted.Do yall think USM would be cool with a bunch of people with camaros hanging out.I`d judt hate to spend half the day driving around half the day looking for a place to meet up.Is the walmart parking lot pretty big.If it is,or another place like the mall there with a large parking lot we could take a far back corner where we would`nt be in the way and make it difficult for anyone to complain.Either day is fine with me,I just want to make it a day we could have the most fun at the track and a good place to hang.We also should have a backup plan incase of bad weather.Just an idea.
#55
Senior Member
iTrader: (3)
Join Date: Jul 2006
Location: MS
Posts: 757
Likes: 0
Received 0 Likes
on
0 Posts
Car: 87 IROC
Engine: 5.7 TPI
Transmission: 700R4
Axle/Gears: 3.27
Re: any mississippi peeps
Someone who lives in H'burg will have to get that info for us. I didnt think of bad weather. I guess we could go w/ the weekend after incase of bad weather.
Im not to familiar w/ H'burg to figure a place to go. Ill try and give the track a call tomorrow and see what they say about us gathering there. I would also hate to drive around half the day.
Im not to familiar w/ H'burg to figure a place to go. Ill try and give the track a call tomorrow and see what they say about us gathering there. I would also hate to drive around half the day.
#56
Supreme Member
iTrader: (3)
Join Date: Jan 2006
Location: Flowood,MS
Posts: 1,489
Likes: 0
Received 0 Likes
on
0 Posts
Car: 87 IROC Z
Engine: 5.7 L98 TPI
Transmission: 700r4,2500 stall
Axle/Gears: G80,10 bolt 3.42's
Re: any mississippi peeps
Found this.http://www.hubcitydragway.comIt`s a 1/4 mile asphalt.601-545-DRAG.It appears they are open on sundays not sure what is scheduled.I`m gonna try yo call while I`m at work tomarrow but Iaint promising I`ll have time.Like I said Either day is cool with me just want it to be fun.We should prolly make our initial meeting place somewhere easy to find like wal-mart.Anybody in town can give you directions to wal-mart incase someone gets lost.Just an Idea.Can I bring my 12 year old son?
#57
Member
iTrader: (5)
Join Date: May 2006
Location: Hattiesburg, MS
Posts: 478
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 Camaro Z28
Engine: 5.3L
Transmission: 4L60E
Axle/Gears: 3.42LSD
Re: any mississippi peeps
Bring whoever you'd like!! The more the merrier. Always willing entertain questions from future thirdgenners. What about the old K-Mart Parking lot??? The place is shut down so That is a big parking lot that would be wide open. not to mention it is right on 98 so it would be easy to find. Right behind Olive Garden, Copeland's, and LongHorn Steakhouse. Can't miss it.
#60
Supreme Member
iTrader: (3)
Join Date: Jan 2006
Location: Flowood,MS
Posts: 1,489
Likes: 0
Received 0 Likes
on
0 Posts
Car: 87 IROC Z
Engine: 5.7 L98 TPI
Transmission: 700r4,2500 stall
Axle/Gears: G80,10 bolt 3.42's
Re: any mississippi peeps
hell no.I forgot all about it.I was busy as hell.My bad.Havent seen uncle tom post lately.you still comeing uncle tom.So how many we got for sure?I`m gonna be at bouge chitta tomarrow I`m not sure how the cell reception is down there but I`ll try to call.
Last edited by Shadygrady; 06-08-2007 at 08:09 PM.
#61
Supreme Member
iTrader: (1)
Join Date: Dec 2006
Location: ms. gulf coast
Posts: 2,403
Likes: 0
Received 3 Likes
on
3 Posts
Car: 91 R/S , 89 dodge p/u
Engine: L31 GM crate re-cammed , 318
Transmission: T-5 , 4 speed auto
Axle/Gears: 3.42 , ?
Re: any mississippi peeps
i'll be there ,what will the location be ? dont think all are happy with dragstrip , but i dont care . just want to be sure of location . [ 2 HR drive for me ]
UNCLE TOM
UNCLE TOM
#62
Senior Member
iTrader: (3)
Join Date: Jul 2006
Location: MS
Posts: 757
Likes: 0
Received 0 Likes
on
0 Posts
Car: 87 IROC
Engine: 5.7 TPI
Transmission: 700R4
Axle/Gears: 3.27
Re: any mississippi peeps
I dont really care where we do it. Need everyone to throw out ideas. Not everyone is helping.
----------
Is it safe to say that these 6 are a locked for the 14/15th?
----------
Is it safe to say that these 6 are a locked for the 14/15th?
Last edited by navyCM; 06-09-2007 at 01:58 PM. Reason: Automerged Doublepost
#63
Junior Member
Join Date: Feb 2005
Location: gulfport, ms
Posts: 42
Likes: 0
Received 0 Likes
on
0 Posts
Car: 87 z28
Engine: 350
Transmission: 7004r
Re: any mississippi peeps
I,m in the Gulfport/ Biloxi area I have an 87 Z-28 /auto 700r4 2800 stall, rebult 5.7 from an 89 Formula with about 20k, I would be interested in meeting here on the coast.
#64
Senior Member
iTrader: (3)
Join Date: Jul 2006
Location: MS
Posts: 757
Likes: 0
Received 0 Likes
on
0 Posts
Car: 87 IROC
Engine: 5.7 TPI
Transmission: 700R4
Axle/Gears: 3.27
Re: any mississippi peeps
H ey swerve Im on the coast as well, maybe we can met up and see each others rides.
As much as Id love to met on the coast the fair thing to do was pick a more central location for those willing to show up, whoch nis Hattiesburg was chosen and there is a drag strip there.
We also have a website for the MS area. Check it oout join up, and post whatever you like. Its: http://southms3rdgen.wetpaint.com/
Do you know anyone else on the coast w/ a 3rd gen F-body? If so talk to them and see what they think about this clud were trying to start.
Feel free to email me: wheelman_1973@yahoo.com
As much as Id love to met on the coast the fair thing to do was pick a more central location for those willing to show up, whoch nis Hattiesburg was chosen and there is a drag strip there.
We also have a website for the MS area. Check it oout join up, and post whatever you like. Its: http://southms3rdgen.wetpaint.com/
Do you know anyone else on the coast w/ a 3rd gen F-body? If so talk to them and see what they think about this clud were trying to start.
Feel free to email me: wheelman_1973@yahoo.com
#65
Supreme Member
iTrader: (3)
Join Date: Jan 2006
Location: Flowood,MS
Posts: 1,489
Likes: 0
Received 0 Likes
on
0 Posts
Car: 87 IROC Z
Engine: 5.7 L98 TPI
Transmission: 700r4,2500 stall
Axle/Gears: G80,10 bolt 3.42's
Re: any mississippi peeps
I thought Hattisburg was closer to the coast than 2 hours.I mean I really dont care where we have it.I got that whole weekend off.Better yet I got july 4th through the 8th off.Hattisbuergs fine with me and so is the coast.Lets remember,no matter where we have it this time,we can have it somewhere else the next time so each time it can be close to some members area.I believe thats a fair.Yes you can lock me in,unless my car blows up or some other unforeseeable crazy crap happens.And sorry again I didnt have very good cell service at all when I was on the river today. Maybe we should meet somwhere like the K Mart parking lot that 87 earthquake said was closed down.That sounds like a decent Idea to me,but I dont know if anyone would get upset about it since I dont live in hubcity.Then for those that would like to can go to the track and play around some. Even if things fall through withthis I`m off so I`ll meet up with somebody somewhere to try to get this thing started.
what will the location be ? dont think all are happy with dragstrip
#66
Senior Member
iTrader: (2)
Join Date: Oct 1999
Location: Hattiesburg, MS, USA
Posts: 893
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1992 Jade Green---Trans Am Converti
Engine: LS1
Transmission: T56
Re: any mississippi peeps
Never-minding the fact I can't go if it's not in Hattiesburg, with people from the coast, Jackson, Vicksburg, etc, Hattiesburg is the best location.
If people wanted to drag-race then the track would be good. Friday night is test-&-tune and isn't too busy. Sunday is street grudge racing and can be busy. Saturday's are limited to big events I believe. I don't think a lot of people would want to race, pay to go to a meeting (at least $10), nor would a loud track with a lot of people be the best place for a first meet. I doubt people would want to come at night or at 3:00 (when the track opens on Sunday).
The Kmart parking lot is a really good idea. We wouldn't get ran off and we're only looking at 10-15 cars anyway. Hell the street racers hang out in the Hobby Lobby parking lot every weekend and don't get run off. It's right of I-59 and easy to get to from any direction.
I do suggest we make a new thread stating there is a meet-n-great coming up with the date and location and keep the discussion going there. I'm sure there's some that viewed this thread when it started and wouldn't know if they didn't check back in.
Kevin D.
If people wanted to drag-race then the track would be good. Friday night is test-&-tune and isn't too busy. Sunday is street grudge racing and can be busy. Saturday's are limited to big events I believe. I don't think a lot of people would want to race, pay to go to a meeting (at least $10), nor would a loud track with a lot of people be the best place for a first meet. I doubt people would want to come at night or at 3:00 (when the track opens on Sunday).
The Kmart parking lot is a really good idea. We wouldn't get ran off and we're only looking at 10-15 cars anyway. Hell the street racers hang out in the Hobby Lobby parking lot every weekend and don't get run off. It's right of I-59 and easy to get to from any direction.
I do suggest we make a new thread stating there is a meet-n-great coming up with the date and location and keep the discussion going there. I'm sure there's some that viewed this thread when it started and wouldn't know if they didn't check back in.
Kevin D.
#67
Senior Member
iTrader: (3)
Join Date: Jul 2006
Location: MS
Posts: 757
Likes: 0
Received 0 Likes
on
0 Posts
Car: 87 IROC
Engine: 5.7 TPI
Transmission: 700R4
Axle/Gears: 3.27
Re: any mississippi peeps
I agree that H'burg is the best since its about the same ride for everyone that might be coming. I dont have a problem w/ it not being at the strip. The K-mart lot sounds like a good idea since it wont be noisy and free.
I guess we could start a new thread so we can get commitment for this met there. Ill go and start a new one and memtion the website I made for us.
I guess we could start a new thread so we can get commitment for this met there. Ill go and start a new one and memtion the website I made for us.
#68
Supreme Member
iTrader: (3)
Join Date: Jan 2006
Location: Flowood,MS
Posts: 1,489
Likes: 0
Received 0 Likes
on
0 Posts
Car: 87 IROC Z
Engine: 5.7 L98 TPI
Transmission: 700r4,2500 stall
Axle/Gears: G80,10 bolt 3.42's
Re: any mississippi peeps
Sounds good to me.K mart parking lot.What time of day yall want to try to meet up.The parking lotwill be more quiet and a better place to meet.Good to hear we wont get run off.I would like to go to the track but its no biggie.I`ll go later on in the day after we meet.I dont get many saturdays off and dont get to go to any track very often so I would like to if anyone else wants to go after the meet.Plus its a full 1/4.All the ones in my area are 1/8th,i`d like to see how I do.Like I said no biggie at all.I just wanna get this thing going and I`d like to meet some fellow thirdgenners.So what time yall wanna try and meet.I`m assuming sometime in the AM.Remember it`s gonna be hotter than poo poo.
#69
Member
iTrader: (5)
Join Date: May 2006
Location: Hattiesburg, MS
Posts: 478
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 Camaro Z28
Engine: 5.3L
Transmission: 4L60E
Axle/Gears: 3.42LSD
Re: any mississippi peeps
Been out of town all weekend. Sounds like my K-Mart idea was pretty good. I'm locked in whether or not I have mine running. i will be fitting my lsx this coming weekend. Then there's wiring and I gotta get a trans. Hopefully I will have it running by the time we meet.
#70
Member
Thread Starter
iTrader: (9)
Join Date: Feb 2004
Location: meridian ms
Posts: 269
Likes: 0
Received 0 Likes
on
0 Posts
Car: 92 Z/28 clone
Engine: 383 carbed
Transmission: t-5
Axle/Gears: 3.73
Re: any mississippi peeps
cruisin the coast sounds good.......if i can get my car /tranny fixed by then..
#71
Member
Join Date: Nov 2001
Location: Byram, MS USA
Posts: 243
Likes: 0
Received 0 Likes
on
0 Posts
Car: Looking
Re: any mississippi peeps
i finally get to say come tomorrow afternoon i'll officially be a 3rd gen owner again....had a guy stop buy today and wants to trade a 87 trans am gta hardtop tpi 350 100% original and stock exhaust for flowmaster muffler just a tad over 100k miles. needs very little works.....typical squeeks and rattles and spoiler crack, but thats the majority of it. so my 69 c/10 will be gone tomorrow afternoon
#72
Supreme Member
iTrader: (3)
Join Date: Jan 2006
Location: Flowood,MS
Posts: 1,489
Likes: 0
Received 0 Likes
on
0 Posts
Car: 87 IROC Z
Engine: 5.7 L98 TPI
Transmission: 700r4,2500 stall
Axle/Gears: G80,10 bolt 3.42's
Re: any mississippi peeps
Thats great man.So you gonna drive it down to hub city the 14th?It is going to be saturday july 14th,right guys?See if you can get a pic of it posted.
#73
Member
Join Date: Nov 2001
Location: Byram, MS USA
Posts: 243
Likes: 0
Received 0 Likes
on
0 Posts
Car: Looking
Re: any mississippi peeps
yeh, he's supposed to come back tomorrow around 6ish since i have to put the bolts back in on the tranny and hook the lines back up on the pickup (started to pull the trans since it started slipping to throw another in it) and hes gonna take it as it is and put the other trans i got in himself.....yeh im planning on driving it instead of the SS, runs great and everything, but with every car i dont know, i need to do some more driving and check all the little things out before i take it on a little trip, but either way im ready to get it back over here, will be my 2nd transam ever against nearly 15 3rd gen camaros ive owned heh.....and surprisingly enough will be my first tpi 350 cars, versus the few 82-84 z28's ive had that i had put built carbed 350's in, so im feeling like a little kid on christmas morning heh and i'll get some pics tomorrow evening and post em
#75
Supreme Member
iTrader: (3)
Join Date: Jan 2006
Location: Flowood,MS
Posts: 1,489
Likes: 0
Received 0 Likes
on
0 Posts
Car: 87 IROC Z
Engine: 5.7 L98 TPI
Transmission: 700r4,2500 stall
Axle/Gears: G80,10 bolt 3.42's
Re: any mississippi peeps
cure,you still got the 4th gen too?If so I`m jealous but happy for you.Looks good
#77
Junior Member
iTrader: (1)
Join Date: May 2007
Posts: 46
Likes: 0
Received 0 Likes
on
0 Posts
Car: 72 s.w.b. c/10
Engine: 350ci
Transmission: 350 turbo/shif kit
Re: any mississippi peeps
hey all pretty new to this board and to third gens just got a 90 bird and started v6 to v8 swap. been here in new albany about 10 yrs now.
#79
Supreme Member
iTrader: (2)
Join Date: Aug 2007
Location: Fairhope, AL
Posts: 2,529
Likes: 0
Received 1 Like
on
1 Post
Car: 89RS(other cars & pics in vBgarage)
Engine: LO3, 305 TBI Mildly Modified
Transmission: BakerBuilt 700R4 w/B&M Megashifter
Axle/Gears: 3.23 Auburn Pro Series LSD
Re: any mississippi peeps
Mobile, AL area here, willing to meet up with MS locals
#80
Junior Member
Join Date: Aug 2007
Location: Florence, MS
Posts: 54
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1988 GTA
Engine: 5.7 TPI
Re: any mississippi peeps
BRANDON MS here... have 1988 GTA Trans Am 5.7 WS6 TPI... digital dash.. looking for others in the central Ms area ..
#81
Supreme Member
iTrader: (3)
Join Date: Jan 2006
Location: Flowood,MS
Posts: 1,489
Likes: 0
Received 0 Likes
on
0 Posts
Car: 87 IROC Z
Engine: 5.7 L98 TPI
Transmission: 700r4,2500 stall
Axle/Gears: G80,10 bolt 3.42's
Re: any mississippi peeps
Whats up.I moved from brandon/flowood area to v burg about a year and half ago.Where do you live in brandon,what do you do?
#82
Junior Member
Join Date: Aug 2007
Location: Florence, MS
Posts: 54
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1988 GTA
Engine: 5.7 TPI
Re: any mississippi peeps
cool man, V Burg isnt that far.. I live in the county in Brandon, outside city limits. What do I do ? like work ? I'm an artist. I design Halloween masks, costumes, props, remodel haunted attractions, etc. What do you do ?
I had a 3rd gen camaro before I was 20...wound up blowing the engine in it, and getting it replaced with a bunk one... finally wound up wrecking it and selling it to a junk yard.. Never thought I would have another 3rd gen until I got this TA last week. MUCH better than the Camaro I had back when....
Chris
I had a 3rd gen camaro before I was 20...wound up blowing the engine in it, and getting it replaced with a bunk one... finally wound up wrecking it and selling it to a junk yard.. Never thought I would have another 3rd gen until I got this TA last week. MUCH better than the Camaro I had back when....
Chris
#84
Senior Member
iTrader: (3)
Join Date: Jul 2006
Location: MS
Posts: 757
Likes: 0
Received 0 Likes
on
0 Posts
Car: 87 IROC
Engine: 5.7 TPI
Transmission: 700R4
Axle/Gears: 3.27
Re: any mississippi peeps
Welcome smash attack. Look forward to meet up w/ you at ou next meet.
Check the regional boards for the new thread for the next meet durin cruisin the coast.
Check the regional boards for the new thread for the next meet durin cruisin the coast.
#85
Member
Join Date: Oct 2007
Location: Vancleave
Posts: 131
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1984 Z28
Engine: 4bbl 305ci
Transmission: 700R4
Axle/Gears: 10 bolt 3.42 w/ Auburn LSD
Re: any mississippi peeps
hey guys.. Chris here. Im in the Vancleave-Ocean Springs area and new to the site. Lived here for about umm yea well all my life. My camaro was a graduation gift and just absolutely love the car. Been searching for a while now for other third gen-atics in the area. Excellent to have the feeling of the lone third gen go away!!
HyperZ
HyperZ
#87
Senior Member
iTrader: (3)
Join Date: Jul 2006
Location: MS
Posts: 757
Likes: 0
Received 0 Likes
on
0 Posts
Car: 87 IROC
Engine: 5.7 TPI
Transmission: 700R4
Axle/Gears: 3.27
Re: any mississippi peeps
if your interested heres a link to our club: https://www.thirdgen.org/forums/sout...ast-third.html
hope to hear from you there...
hope to hear from you there...
#88
Junior Member
Join Date: Jun 2006
Location: Mons, Belgium
Posts: 53
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1989 Trans Am
Engine: 5.7 Carbed 1970 Camaro SS Block
Transmission: 700R4
Axle/Gears: 2.73, becoming 3.42 Posi
Re: any mississippi peeps
Hello all!!
I have been a lurker on this board for a few years now but am originally from MS. I currently live in Belgium though so I havent checked out this part of the board before now. So, I thought I would say hello.
My 89 Trans Am is in Petal right now. Its had quite a bit of work done to it and is about to go under the knife again...all without me there.
Originally, it had a 305 TBI engine, but developed a head gasket leak. I took the opportunity to switch the engine to a carbed 350 from a 1970 Camaro SS. The heads are from a 1972 Corvette LT1. I also have headers and a custom exhaust.
The current mods are going to be switching the rear from the standard 2.73 one wheeler to a 3.42 posi unit. I am also redoing the interior and getting new wheels and tires. I plan to go with 17x.9.5 ZR1 wheels.
I will be home later this summer and get to see my car for the first time in a year and a half. I can hardly wait!!!
PDG
I have been a lurker on this board for a few years now but am originally from MS. I currently live in Belgium though so I havent checked out this part of the board before now. So, I thought I would say hello.
My 89 Trans Am is in Petal right now. Its had quite a bit of work done to it and is about to go under the knife again...all without me there.
Originally, it had a 305 TBI engine, but developed a head gasket leak. I took the opportunity to switch the engine to a carbed 350 from a 1970 Camaro SS. The heads are from a 1972 Corvette LT1. I also have headers and a custom exhaust.
The current mods are going to be switching the rear from the standard 2.73 one wheeler to a 3.42 posi unit. I am also redoing the interior and getting new wheels and tires. I plan to go with 17x.9.5 ZR1 wheels.
I will be home later this summer and get to see my car for the first time in a year and a half. I can hardly wait!!!
PDG
#89
Senior Member
iTrader: (3)
Join Date: Jul 2006
Location: MS
Posts: 757
Likes: 0
Received 0 Likes
on
0 Posts
Car: 87 IROC
Engine: 5.7 TPI
Transmission: 700R4
Axle/Gears: 3.27
Re: any mississippi peeps
hey glad to see you keeping up w/ the board. if you dont mind me asking why you living in belgium? are you moving back to the states or just a visit?
if you are staying feel free to look into our local south MS club. we are always looking for new members? the link is above to our thread on here. if your are interested in joining LMK and ill give you the addy for our offical site.
if you are staying feel free to look into our local south MS club. we are always looking for new members? the link is above to our thread on here. if your are interested in joining LMK and ill give you the addy for our offical site.
#90
Junior Member
Join Date: Jun 2006
Location: Mons, Belgium
Posts: 53
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1989 Trans Am
Engine: 5.7 Carbed 1970 Camaro SS Block
Transmission: 700R4
Axle/Gears: 2.73, becoming 3.42 Posi
Re: any mississippi peeps
Work has brought me to Belgium. I have been here for almost 6 years. I am coming home for a visit this summer (late July/early August) but move back to the US in December. I will be going to Oklahoma then though, but will of course visit MS as that is where my family is and its where I call home.
I would be glad to join up, but I would likely only be an online member simply because of distance. However, any time I could be there I definitely would be.
PDG
I would be glad to join up, but I would likely only be an online member simply because of distance. However, any time I could be there I definitely would be.
PDG
#92
Junior Member
Join Date: Jun 2006
Location: Mons, Belgium
Posts: 53
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1989 Trans Am
Engine: 5.7 Carbed 1970 Camaro SS Block
Transmission: 700R4
Axle/Gears: 2.73, becoming 3.42 Posi
Re: any mississippi peeps
Are there any upcoming events this summer? Say late July/early August? I will be in Hattiesburg and Natchez around then.
PDG
PDG
#93
Member
Join Date: Aug 1999
Location: Jackson, Miss., CSA
Posts: 345
Likes: 0
Received 0 Likes
on
0 Posts
Car: '87 IROC-Z
Engine: 406 Superram/DFI
Transmission: Auto BTE 3000 conv
Re: any mississippi peeps
if there's enough interest I'd be glad to host a meet at my house just outside of jackson. I've got 10ac so lots of parking, bunch of stuff for a bonfire, etc. Anybody?
#95
Supreme Member
iTrader: (3)
Join Date: Jan 2006
Location: Flowood,MS
Posts: 1,489
Likes: 0
Received 0 Likes
on
0 Posts
Car: 87 IROC Z
Engine: 5.7 L98 TPI
Transmission: 700r4,2500 stall
Axle/Gears: G80,10 bolt 3.42's
Re: any mississippi peeps
Now thats what I`m talking about.That would be alot easier for me to do than drive to the cost.I could make time for that.Keep me informed.I`m deffinatly interested.
#96
Member
Join Date: Aug 1999
Location: Jackson, Miss., CSA
Posts: 345
Likes: 0
Received 0 Likes
on
0 Posts
Car: '87 IROC-Z
Engine: 406 Superram/DFI
Transmission: Auto BTE 3000 conv
Re: any mississippi peeps
I'm out near raymond on midway rd. About 15min from the interstate exit for highway 18. you guys want to have a meet? anytime. I will subscribe to this thread.
#97
Supreme Member
iTrader: (3)
Join Date: Jan 2006
Location: Flowood,MS
Posts: 1,489
Likes: 0
Received 0 Likes
on
0 Posts
Car: 87 IROC Z
Engine: 5.7 L98 TPI
Transmission: 700r4,2500 stall
Axle/Gears: G80,10 bolt 3.42's
Re: any mississippi peeps
I know right where your at.Grew up in raymond and clinton.Sounds good to me.sundays probably best for me.It should be pretty easy for quick chicken to atleast find the exit.I could meet him somewhere nearby to get closer or meet somewhere in town.I go to brandon a few times a month to visit my dad so I`m through there pretty regular.Drag strip maybe?Sounds like you got a pretty bad combo
#98
Supreme Member
iTrader: (12)
Re: any mississippi peeps
i just took a look at my map book and seen Raymond. when are you guys planning to get together? anytime within the next 3 weeks is bad for me as we just had a family issue and we took a slight hit on funds plus i have 2 scheduled projects to take care of.
and at the end of the month we have inventory. im all about meeting other folks in diff areas and want to make this trip if things allow.
#99
Member
Join Date: Aug 1999
Location: Jackson, Miss., CSA
Posts: 345
Likes: 0
Received 0 Likes
on
0 Posts
Car: '87 IROC-Z
Engine: 406 Superram/DFI
Transmission: Auto BTE 3000 conv
Re: any mississippi peeps
I know right where your at.Grew up in raymond and clinton.Sounds good to me.sundays probably best for me.It should be pretty easy for quick chicken to atleast find the exit.I could meet him somewhere nearby to get closer or meet somewhere in town.I go to brandon a few times a month to visit my dad so I`m through there pretty regular.Drag strip maybe?Sounds like you got a pretty bad combo
We can all meet on sunday is fine. As long as it isn't the weekend of aug 16/17th then I'm ok with whenever.
#100
Junior Member
Join Date: Aug 2007
Location: Florence, MS
Posts: 54
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1988 GTA
Engine: 5.7 TPI
Re: any mississippi peeps
I would like to attend, but most likely it will be WITHOUT my Trans Am.... its been at the shop for 3 months now. After this work is done It has to go to transmission rebuild. Does anyone around here ( jackson area) have a good 700r4 ? maybe my restoration will be done by next summer.... MAyBe...
Chris
Chris