Know a good shop in Northern AZ (Maricopa County area) POST IT HERE!!
#1
Guest
Posts: n/a
If you know of/would like to recomend a good machine/body/parts shop and or junkyard please post it here! An address or phone # if you have it would be great as well. Please NO debates, just info and recommendations. Thanks!
Bruce (90RS305)
What machine shops are you guys currently using and how would you rate their service? I used R N R Machine
Perhaps we could have a "sticky/useful" thread for things like performance shops, machine shops, junkyards, and anything else that gets asked often. ***elbows Bruce*** Useful information threads sort of like what they're doing on the TBI board.
Does anyone have a stock TBI laying around in case I fudge mine up?
Bruce (90RS305)
What machine shops are you guys currently using and how would you rate their service? I used R N R Machine
Perhaps we could have a "sticky/useful" thread for things like performance shops, machine shops, junkyards, and anything else that gets asked often. ***elbows Bruce*** Useful information threads sort of like what they're doing on the TBI board.
Does anyone have a stock TBI laying around in case I fudge mine up?
Last edited by 90RS305; 01-10-2004 at 06:20 AM.
#3
Supreme Member
Join Date: Aug 2002
Location: Mesa, AZ: Transplanted from Chicago, IL
Posts: 1,824
Likes: 0
Received 0 Likes
on
0 Posts
I used Chuck's Speed Shop. There work was excellent but I thought they were pricey. My head work was $480.00.
Last edited by OMINOUS_87; 01-07-2004 at 11:47 PM.
#5
Supreme Member
Join Date: Apr 2003
Location: Tempe, Arizona
Posts: 2,070
Likes: 0
Received 0 Likes
on
0 Posts
Car: 96 Silverado/99 Suburban
Engine: 700 cubic inches of 'Muican Awesome
Transmission: 4L80/4L60
Axle/Gears: Chunky/Clunky
Re: Machine shop
Originally posted by 82Z28NAZ
...Perhaps we could have a "sticky/useful" thread for things like performance shops, machine shops, junkyards, and anything else that gets asked often. ***elbows Bruce*** Useful information threads sort of like what they're doing on the TBI board...
...Perhaps we could have a "sticky/useful" thread for things like performance shops, machine shops, junkyards, and anything else that gets asked often. ***elbows Bruce*** Useful information threads sort of like what they're doing on the TBI board...
Bruce (90RS305)
#7
Supreme Member
iTrader: (1)
Join Date: Dec 2000
Location: Mesa, AZ
Posts: 1,463
Likes: 0
Received 0 Likes
on
0 Posts
Car: A Camaro
Engine: Weak
Transmission: Weaker
This isn't a machine shop, but The Car Shop on Broadway in Tempe is a good place to go if you need something welded up or quickly fixed etc. They did my relocation brackets and I'm happy with them. Whatever you do, don't go to AMP = All Mustang Performance I went there to get my bottle filled and they gave me so much ****, duh
Trending Topics
#8
Supreme Member
Join Date: Feb 2002
Location: Avondale, AZ
Posts: 2,308
Likes: 0
Received 0 Likes
on
0 Posts
Car: currently thirdgenless!!!
What did I get done...let's see....
Magna flux
vavles radiused
new exhaust valves
guide plates
bowl blending
I think that was everything
Magna flux
vavles radiused
new exhaust valves
guide plates
bowl blending
I think that was everything
#9
Supreme Member
Join Date: Aug 2002
Location: Mesa, AZ: Transplanted from Chicago, IL
Posts: 1,824
Likes: 0
Received 0 Likes
on
0 Posts
What did I get done...let's see....
Magna flux
vavles radiused
new exhaust valves
guide plates
bowl blending
I think that was everything
Magna flux
vavles radiused
new exhaust valves
guide plates
bowl blending
I think that was everything
If it includes parts it sounds about right.
#11
Guest
Posts: n/a
Muffler shop: Mighty Muffler on Cave Creek Road just north of where it meets Dunlop and 7th Street - this guy will go out of his way to help anyone. They also do general repair. They supplied pipe and bends for my last exhaust project.
Mighty Mufler
10032 North Cave Creek Road, Phoenix, AZ 85020
(602) 944-5210
Mighty Mufler
10032 North Cave Creek Road, Phoenix, AZ 85020
(602) 944-5210
#12
TGO Supporter
Join Date: Oct 1999
Location: Ft. Worth, TX
Posts: 533
Likes: 0
Received 0 Likes
on
0 Posts
#13
Senior Member
Join Date: Jun 2003
Location: Buckeye AZ
Posts: 615
Likes: 0
Received 0 Likes
on
0 Posts
B & M muffler in Tolleson good place to go if ya just need a quick weld, or a pipe bent and welded in. its on the northside of the road off of Van buren. no idea of the address. PHONE # 623-936-4165. they will sell tubing and make bends for ya as well. $30 for a 10ft of 2.5" exhaust tubing.
Phoenix engine rebuilders 21632 N 7th ave. 602-866-8044, they were good to me, they do everything in house, unlike the one place i took my heads to but that turned out okay.
Phoenix engine rebuilders 21632 N 7th ave. 602-866-8044, they were good to me, they do everything in house, unlike the one place i took my heads to but that turned out okay.
Last edited by Z28GEN3; 01-24-2004 at 12:13 AM.
#14
Supreme Member
Join Date: Aug 2002
Location: Mesa, AZ: Transplanted from Chicago, IL
Posts: 1,824
Likes: 0
Received 0 Likes
on
0 Posts
I used Chuck's Speed Shop. There work was excellent but I thought they were pricey. My head work was $480.00.
I will say it again.
I dont think any other shop in the valley offers as good an experience as Chucks does. They are way more then just a machine shop. They are a full service race shop with machining services on location. They do a wide variety of race buildups, stuff beyond streetable. They also do serious buildups on RV powerplants: you know big blocks, diesel, turbo, etc... However they dont throw any work away and from my experience have always had time for the street enthusiest also. The Manager is great, really makes sure you get taken care of.
They took care off the block prep on my stroker motor and took care of all the little details, I paid good money but couldnt be more pleased. 550$
My buddy just got done working with them as well, stroker motor block prep, head work on his Dart Pro 1s, indexed crank, cut the billet flywheel for his 6spd etc... 700$_inculded some bearings and small parts.
We are also in the process of a stroker motor build up for ESAMS, guess what shop we will source for the work, LOL!!!
We do all assembley and buildup of our own motors but Chucks does assembley as well.
Last edited by OMINOUS_87; 01-08-2004 at 11:55 PM.
#15
Supreme Member
Join Date: Aug 2002
Location: Mesa, AZ: Transplanted from Chicago, IL
Posts: 1,824
Likes: 0
Received 0 Likes
on
0 Posts
AZAUTOMASTERS!!
So far so good, I just started flogging on my car, got me 1000 miles now. The Automaster trans hasnt hit the track yet but i am running it pretty hard on the street with Drag Radials, 3.73 gears, and 3000rpm Vigilante converter.
Havent popped the cherry yet but if the trans lets go at the track you guys will be the second to know about it, as Automaster will be the first since he would have to service it under the warranty that he provides.
#17
Supreme Member
Join Date: Aug 2002
Location: Mesa, AZ: Transplanted from Chicago, IL
Posts: 1,824
Likes: 0
Received 0 Likes
on
0 Posts
Would it be ok for persons to list any talents they might have in regard to automotive service and repair along with a list of qualifications???
JK man, you know I love ya!
Now none of you fools take that out of context!
We all know you weld and fab, its in your sig.
#18
Supreme Member
Join Date: Apr 2003
Location: Tempe, Arizona
Posts: 2,070
Likes: 0
Received 0 Likes
on
0 Posts
Car: 96 Silverado/99 Suburban
Engine: 700 cubic inches of 'Muican Awesome
Transmission: 4L80/4L60
Axle/Gears: Chunky/Clunky
Originally posted by 82Z28NAZ
Would it be ok for persons to list any talents they might have in regard to automotive service and repair along with a list of qualifications???
Would it be ok for persons to list any talents they might have in regard to automotive service and repair along with a list of qualifications???
Bruce (90RS305)
#20
Supreme Member
Join Date: Apr 2003
Location: Tempe, Arizona
Posts: 2,070
Likes: 0
Received 0 Likes
on
0 Posts
Car: 96 Silverado/99 Suburban
Engine: 700 cubic inches of 'Muican Awesome
Transmission: 4L80/4L60
Axle/Gears: Chunky/Clunky
*cough* read the top of the first post *cough*
I'll be picking through both the shop threads periodically cleaning them up to make SURE that it's just shop info/recommendations. Thanks guys!
I'll be picking through both the shop threads periodically cleaning them up to make SURE that it's just shop info/recommendations. Thanks guys!
#22
Guest
Posts: n/a
for our manual tranny friends
The Clutch Shop
General repair, clutch work, tranny rebuild.
16416 N Cave Creek Road
602-923-1889
Had clutch replaced, did excellent job, and fast service. Dude even drove me home and picked me up when the car was done.
General repair, clutch work, tranny rebuild.
16416 N Cave Creek Road
602-923-1889
Had clutch replaced, did excellent job, and fast service. Dude even drove me home and picked me up when the car was done.
#24
Junior Member
Join Date: May 2002
Location: Phoenix,AZ
Posts: 84
Likes: 0
Received 0 Likes
on
0 Posts
Car: 67 ss 89 rs
Engine: 327 350tbi
Transmission: 5speed
Auto Painting and Bodyworks:
Dan's Auto World
10021 N. Cave Creek Rd.
Phoenix, AZ 85020
(602) 943-7701
They did a subframe off paint on my 67 camaro which included rust repair. The turn around time was very quick and the quality is outstanding. He was doing several other muscle cars when I had my car in and all of the work was jaw dropping. Price was really affordable too.
Dan's Auto World
10021 N. Cave Creek Rd.
Phoenix, AZ 85020
(602) 943-7701
They did a subframe off paint on my 67 camaro which included rust repair. The turn around time was very quick and the quality is outstanding. He was doing several other muscle cars when I had my car in and all of the work was jaw dropping. Price was really affordable too.
#26
Member
Join Date: Jun 2004
Location: Gilbert AZ
Posts: 369
Likes: 0
Received 0 Likes
on
0 Posts
Car: 2000 Camaro SS
Engine: LS1
Transmission: t-56
Axle/Gears: 4.10
Car Alarm/stereo Installer
Just wanted to let everyone know on this board about a friend of mine that has his own small business going on. He does car alarms and stereos. His web site has some prices but it would proably be best to call him and ask him over the phone. He has installed 3 alarms for me personally. Remote start, door actuators... He is located in Mesa btw.
http://members.***.net/mobilesynergy/
http://members.***.net/mobilesynergy/
#28
Member
Originally posted by 82Z28NAZ
Muffler shop: Mighty Muffler on Cave Creek Road just north of where it meets Dunlop and 7th Street - this guy will go out of his way to help anyone. They also do general repair. They supplied pipe and bends for my last exhaust project.
Mighty Mufler
10032 North Cave Creek Road, Phoenix, AZ 85020
(602) 944-5210
Muffler shop: Mighty Muffler on Cave Creek Road just north of where it meets Dunlop and 7th Street - this guy will go out of his way to help anyone. They also do general repair. They supplied pipe and bends for my last exhaust project.
Mighty Mufler
10032 North Cave Creek Road, Phoenix, AZ 85020
(602) 944-5210
Just my .02.
#30
Junior Member
Join Date: Feb 2001
Location: Maricopa AZ USA
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
Car: 84 z28 or 94 firebird
Engine: 350 3.4L
Transmission: t-5
KLS Cylinder head 7th st and broadway
I recomend you dont use this shop. I took my pistons and rods there to be pressed on. Four of them were put on upside down (They are dome pistons). I took them back today to have them switched and they broke one. Bastards!!!!! All they had to say was sorry one will be here monday. Top it all off when I took them there the first time I asked them if they know which way they go on. They said " of course I've been doing this for 7 years". The guy that said this was the guy that put the pistons on upside down and broke one.
#31
TGO Supporter
Join Date: Apr 2004
Posts: 509
Likes: 0
Received 0 Likes
on
0 Posts
Car: 91 Z28
Engine: L98
Transmission: 700R4
Frontier Automotive
16223 N Cave Creek Rd
Phoenix, 85032 - 2916
(602) 992-1650
buddy of mine works here. I went in to have AC converted over to R 134a. He checked system and all was ok and held vaccum so we decided to go with Freeze 12 instead of the 134a and I'm glad I did. Pretty cheap for a system fill and a lot colder than 134a
16223 N Cave Creek Rd
Phoenix, 85032 - 2916
(602) 992-1650
buddy of mine works here. I went in to have AC converted over to R 134a. He checked system and all was ok and held vaccum so we decided to go with Freeze 12 instead of the 134a and I'm glad I did. Pretty cheap for a system fill and a lot colder than 134a
#32
TGO Supporter
Join Date: Nov 2002
Location: NE Phx, AZ
Posts: 423
Likes: 0
Received 2 Likes
on
2 Posts
Car: 2007 Infiniti G35 SEDAN
Engine: 306HP 3.5L V6
Transmission: Auto Pilot Baby!!!!
Axle/Gears: Don't care!
Auto Spec Machine Shop
Shop owner - Pham (pronounced: "pom")
1702 W Hatcher Rd
PHOENIX, AZ 85021 - 2054
(602) 870-1482
These guys rebuilt the engine on my 300ZX and did an incredible job. Everything was done right the 1st time around w/out any problems. The only drawback was that my pistons had to be ordered and shipped from Japan; which took 3 weeks. Once they were in, I had the car back 1 week later.
They churn out about 20 motors a month. They're also very reasonable. I was quoted anywhere from $2000 - $2700 to rebuild an '86 300zx. They charged me $1500. They offer a 1 year guarantee with every rebuild REGARDLESS of mileage. The guarantee is also transferable if you sell the car.
The owner; Pham: is Vietnamese and can be a little hard to understand when you first meet with him. The biz has been there for 20 years and he's definitely good at what he does. I've sent about 6 ppl there to get engines rebuilt over the last year and every single one has been more than satisfied.
Shop owner - Pham (pronounced: "pom")
1702 W Hatcher Rd
PHOENIX, AZ 85021 - 2054
(602) 870-1482
These guys rebuilt the engine on my 300ZX and did an incredible job. Everything was done right the 1st time around w/out any problems. The only drawback was that my pistons had to be ordered and shipped from Japan; which took 3 weeks. Once they were in, I had the car back 1 week later.
They churn out about 20 motors a month. They're also very reasonable. I was quoted anywhere from $2000 - $2700 to rebuild an '86 300zx. They charged me $1500. They offer a 1 year guarantee with every rebuild REGARDLESS of mileage. The guarantee is also transferable if you sell the car.
The owner; Pham: is Vietnamese and can be a little hard to understand when you first meet with him. The biz has been there for 20 years and he's definitely good at what he does. I've sent about 6 ppl there to get engines rebuilt over the last year and every single one has been more than satisfied.
#34
Member
iTrader: (1)
Join Date: Apr 2003
Location: Phoenix, AZ
Posts: 372
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 IROC-Z / 1992 Corvette
Engine: 305 TPI / LT1
Transmission: 700R4
Rettke's Auto Care = A+++
This shop is the best!
They got my car to pass emissions & they didn't try to f-me in the process.
If I ever have to take my car into a shop ever again (hope I won't need to....) it would be Rettke I'd take it to.
Location: 1900 N. McClintock
S. W. corner of McClintock & McKelleps
480-945-9299
They got my car to pass emissions & they didn't try to f-me in the process.
If I ever have to take my car into a shop ever again (hope I won't need to....) it would be Rettke I'd take it to.
Location: 1900 N. McClintock
S. W. corner of McClintock & McKelleps
480-945-9299
#35
Member
iTrader: (1)
Join Date: Apr 2003
Location: Phoenix, AZ
Posts: 372
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 IROC-Z / 1992 Corvette
Engine: 305 TPI / LT1
Transmission: 700R4
Midas Muffler I17 & Dunlap = Ripoff
POS!!!!!!!!!!Quoted me one price for Catalytic Converter & charged me another. When he gave me the quote, he said if that is all that needs to be done. I told him that is all I want them to do, I know it needs other work & I don't want any other work done. When I saw the work order it said something about changing my trans oil. When I asked him about it, he said something about GM using inferior fluid, like it had never been changed. Blah, blah, blah....
When I asked him about the quote, he danced around & gave me some BS story that he didn't know that I needed a extra part ($14.99). Did infact charge me $199 + tax when I was quoted $187 + tax. When I asked how did he know what to quote me then, he didn't say anything.
On the reciept I had to sign I put "under protest" above my name.
$30.00 isn't alot of money, it's the fact he thought he could take advantage of me because I'm a woman! I'm in the process of filing a complaint to Midas International Corp.; BBB & AZ Att. General office.
Address: 8816 N. Black Canyon
602-995-9229
When I asked him about the quote, he danced around & gave me some BS story that he didn't know that I needed a extra part ($14.99). Did infact charge me $199 + tax when I was quoted $187 + tax. When I asked how did he know what to quote me then, he didn't say anything.
On the reciept I had to sign I put "under protest" above my name.
$30.00 isn't alot of money, it's the fact he thought he could take advantage of me because I'm a woman! I'm in the process of filing a complaint to Midas International Corp.; BBB & AZ Att. General office.
Address: 8816 N. Black Canyon
602-995-9229
#36
Senior Member
Join Date: Feb 2004
Location: Phoenix, AZ
Posts: 510
Likes: 0
Received 1 Like
on
1 Post
Car: 85 87 87 91 92
Engine: 305 TPI 350 TPI 350 Carb
Transmission: B/W T-5 and 700R4
Well its a Tire Shop "Big O"
Scottsdale (68th St & Thomas)
Or
Phoenix (19 & Glendale)
Adam (Owner) Cell 602-390-0911
Tell Him Preston Sent ya and to hook you up with a good deal. If he doesn't remember the name tell him the guy with 5 Trans Am's sent you.
Scottsdale (68th St & Thomas)
Or
Phoenix (19 & Glendale)
Adam (Owner) Cell 602-390-0911
Tell Him Preston Sent ya and to hook you up with a good deal. If he doesn't remember the name tell him the guy with 5 Trans Am's sent you.
#37
TGO Supporter
Join Date: Nov 2002
Location: NE Phx, AZ
Posts: 423
Likes: 0
Received 2 Likes
on
2 Posts
Car: 2007 Infiniti G35 SEDAN
Engine: 306HP 3.5L V6
Transmission: Auto Pilot Baby!!!!
Axle/Gears: Don't care!
Re: Midas Muffler I17 & Dunlap = Ripoff
C&R Tire & Auto Center on Cave Creek just south of Grovers in N. Phx has always been very straight and reasonable with me. I'd recommend them to anyone.
Last edited by 90RS305; 05-02-2005 at 09:48 PM.
#39
Supreme Member
Join Date: Apr 2003
Location: Tempe, Arizona
Posts: 2,070
Likes: 0
Received 0 Likes
on
0 Posts
Car: 96 Silverado/99 Suburban
Engine: 700 cubic inches of 'Muican Awesome
Transmission: 4L80/4L60
Axle/Gears: Chunky/Clunky
Originally posted by 3GTAs1TA1Z28
Hey guys what happened to the whole "NO DEBATES" statement in the first line?
Hey guys what happened to the whole "NO DEBATES" statement in the first line?
Bruce (90RS305)
#40
Junior Member
Join Date: Jun 2005
Location: Phoenix, Arizona
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Car: 88 Firebird Formula
Engine: 350
Transmission: 700r4
dealer parts
Hey guys, i'm new around here but if anyone needs a source for dealer parts i work for Power Chevrolet in Phoenix in the parts department. So if you guys need anything i can hook up my employee discount. az_nick@yahoo.com
#41
Supreme Member
Join Date: Feb 2002
Location: Avondale, AZ
Posts: 2,308
Likes: 0
Received 0 Likes
on
0 Posts
Car: currently thirdgenless!!!
Hey thanks Nick. Welcome to the boards and welcome to PHX. Open a new post and throw your car on there. Let's get a look at her.
#42
Member
iTrader: (1)
Join Date: Sep 2005
Location: Arizona
Posts: 324
Likes: 0
Received 0 Likes
on
0 Posts
Car: 91 Camaro RS
Engine: 305 tbi
Transmission: 700R4
I always take my car to Jerry Accurate Auto on main inbetween greenfield and lindsay... they always do a sweet job and if they know ya they will hook you up pretty good, for instance if the book says its 5hrs labor and it only takes them 2, then they only charge ya for to or if they quote you too low and go over it a little they will just hook ya up with some stuff for free usually.. its a little shop but them boys know what there doin
#44
Member
Hi everyone, I'm new here. I'm not a Third-Gen driver...But I do have TBI, does that count?
Anyway, I used Basko's Machine Shop in Gilbert also and they did a geat job and the motor sounds awesome. I agree, Ray is a great guy.
BTW: This site kicks a$$ for info on the ecm boards. I'm running a 1228746 in my 82 vette out of a 92 Firebird.
Anyway, I used Basko's Machine Shop in Gilbert also and they did a geat job and the motor sounds awesome. I agree, Ray is a great guy.
BTW: This site kicks a$$ for info on the ecm boards. I'm running a 1228746 in my 82 vette out of a 92 Firebird.
#45
Supreme Member
iTrader: (3)
Join Date: Aug 2006
Location: Tucson, Arizona
Posts: 1,439
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 IROC-Z Camaro
Engine: L98 5.7L TPI
Transmission: 700-R4
Axle/Gears: 3.27 BW
Automatic Transmission Rebuilders in Kingman did a wonderful job on rebuilding my 700. They're at 124 E. Beale St, just off of Andy Devine, the number is (928) 753-3121 The manager is Brandon Loos, and he's awesome. When the tranny was apart, let me come in, see what he was replacing, I knew everything ahead of time, and he has the nice Hayden tranny coolers, and installs them without doing anything else for $90.
#46
Junior Member
Join Date: Jan 2007
Location: Tempe, Az.
Posts: 84
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 Camaro IROC Z-28
Engine: 305 T.P.I.
Transmission: 700 R4
HEY NICK, I need a m.a.f. sensor for a 1987 iroc,350 5.7 ltr. auto zone quote is $165(cardone-remanufactured). can ya save me some cash? or can ya give me any ideas? what does a m.a.f. do? My brother gave me my iroc after letting it sit for 4 years while he was serving in germany and irac,air force.he doesnt remember all the upgrades he did and i don't know about high performance parts. So I dropped gas tank had it all cleaned and put in all newfilters etc...Runs great but it get's so much better. Now the m.a.f. is, well? help...? my-roc
#47
Supreme Member
Join Date: Aug 2004
Location: Norwich, CT
Posts: 1,213
Likes: 0
Received 3 Likes
on
2 Posts
Car: '89 Trans AM/'88 GTA
Engine: (2) Tuned Port L98's
Re: Know a good shop in Northern AZ (Maricopa County area) POST IT HERE!!
Arizona TPI Fuel Injection Innovators.
Tempe-Mesa area, AZ Maricopa county
Great facility, diagnostic equipment, onsite dyno,
and TPI/LT1/LS1 parts in house. I enjoyed my visit.
All staff members knowledgeable in TPI and aftermarket
gear. They offer custom PROM tuning, Injector cleaning
and conversions for just about any car.
Good website, project cars & parts!
http://www.AZTPI.com
I had a Code '33' problem I couldn't find, they got it done in
an hour or two. I was very pleased.. No run around.. they
didn't throw parts at the problem. 100% truthful.
I will be taking the car back for further evaluation later.
Very close to Mesa/Scottsdale/Gilbert/Chandler, It's the only
place that I will let people touch my car other than myself!
Tempe-Mesa area, AZ Maricopa county
Great facility, diagnostic equipment, onsite dyno,
and TPI/LT1/LS1 parts in house. I enjoyed my visit.
All staff members knowledgeable in TPI and aftermarket
gear. They offer custom PROM tuning, Injector cleaning
and conversions for just about any car.
Good website, project cars & parts!
http://www.AZTPI.com
I had a Code '33' problem I couldn't find, they got it done in
an hour or two. I was very pleased.. No run around.. they
didn't throw parts at the problem. 100% truthful.
I will be taking the car back for further evaluation later.
Very close to Mesa/Scottsdale/Gilbert/Chandler, It's the only
place that I will let people touch my car other than myself!
#48
Re: Know a good shop in Northern AZ (Maricopa County area) POST IT HERE!!
Action RaceFab
Racing Fabrication
-Custom stainless headers
-Custom stainless exhausts
-Turbo systems
-Roll cages
ActionRaceFab@Gmail.com
480-862-2209
Racing Fabrication
-Custom stainless headers
-Custom stainless exhausts
-Turbo systems
-Roll cages
ActionRaceFab@Gmail.com
480-862-2209
#49
Re: Know a good shop in Northern AZ (Maricopa County area) POST IT HERE!!
Hi,
Does any one have any experiece with AZ Automaster? I have a 84 Z28 305 HO.
How was the quality of their work? Did you have any issues?
Thanks
Bob
Does any one have any experiece with AZ Automaster? I have a 84 Z28 305 HO.
How was the quality of their work? Did you have any issues?
Thanks
Bob
Last edited by rsnoody; 11-07-2007 at 06:12 PM.