I need to get rid of this thing ASAP. The chassis needs too much work, needs a tranny, etc. I have another project now anyway.


Im am in camp pendleton (located between L.A. and S.D.) I would like to arrange local pickup where possible but I am willing to ship.


Engine:

305 .030 over, 214/224 flat tappet cam, $Make offer
#416 heavily ported heads with stock size valves w/ back cut. Brand new Comp ovate springs installed on them $100
Edelbrock Torker II single plane intake manifold $60
Tall circle track style valve covers with breathers $10
Open element aircleaner with K&N filter $15
Edelbrock 1405 600 CFM carburetor with several performance mods $100 + tuning kit $15

The car went 13.6 and trapped almost 105 with these parts.

Ignition:
MSD 6AL with rev limiter chip set, nearly brand new $150
ACCEL hi-perf. remote coil. $20
Nearly brand new MSD 8mm wire set, 90 deg angle boots $10

Exhaust:

Edelbrock TES headers for L98, C.A.R.B. Legal. Recently high temp painted and baked in heat treat oven with heat wrap installed. Perfect condition, y pipe included $150

Edelbrock TES 3" Cat back exhaust $150

Suspension:

Global West adjustable torque arm (black) with custom rear mount to work with 9" rear. Should fit stock rear but if not global west sells replacement rear mount for around 55 bux
$300

SPOHN tubular lower control arms (black) with poly bushings pr. $90

SPOHN Tubular adjustable Panhard bar (black) poly bushings $100

Comp Engineering 3 position adjustable rear drag shocks, low miles $60

Air ride rear air bags (good for tuning drag launches) all assorted hardware $60


INTERIOR:

Dashpad, 1989 firebird. Excellent condition. One small dimple near driverside corner, otherwise perfect. $80

Hurst shifter, for T5 some wear (a little slop) still way better than a stock shifter. $40

Corbeau race seat, forward and aft adjustable only. Wide version for bigger guys (fits skinny guys like myself too). Includes corbeau frame. Black cloth, no lettering, slight fading upper LH side. $140

Hydraulic Clutch pedal assembly, Master cylinder, and slave cylinder $50

Mechanical clutch and pedal assembly, Z bar and assorted hardware $30

Any other Misc. Parts fro mthe interior are also available, make request.

REAR AXLE:

Id really like to give this a good home

Ford 9" with ford posi, 3.89 gears, Moser 31 spline axles. 11" Disk brakes with calipers. Moser torque arm mount. Less than 2000 miles.
$1400 - Local pick up.

Exterior:

Early T/A flat wing spoiler $15

any other body parts you want, the car has a T/A exterior and hood.

MISC.

454 TBI unit minus injectors $120
7747 TBI ECMs, $70

More parts as I remember what I have laying around.


-------------------------------------------
Feel Free to PM or email me if:
You dont see it listed here I may still have it.
You have any specific questions, or are serious about parts and would like photos etc. (Dont make me take pics of stuff that im selling for pennies on the dollar please)

All prices are open to negotiation, no reasonable offer will be refused!

Everything must go, FAST! I will entertain deliveries even if its not far. Pickups can be easily arranged for the larger items.

Email: Chewbaccathedog@hotmail.com
AIM: TopfuelTBI
Yahoo messenger: Chewbaccathedogefi
ICQ: Chewbaccathedog

 

Candela muchacho!

It's an end of an era!

 

OR take the whole car for $2800 OBO

EASILY $3000+ in parts

I didnt even include the fact that it has GTA style crosslace wheels with Nitto drag radials (plenty of tread left)

 

.

 

its just one seat

the forza II model, http://www.corbeau.com/products/forza2/forza2.shtml# no leather patches and no corbeau script, just solid black cloth


Ill try to get a photo of the actual seat tomorrow

 

You just sold those nearly new MSD wires for $10!!!! We'll have to ship them to zip code 75093 (Dallas, TX area).

tell me more about the GTA wheels and tires, and how much you need for them.

If you take PayPal, I'll pay ypu for them TONIGHT. Just give me an e-mail address and shipping amount to include.

Have a Great Day!!!



- Vern

 

One of my out of state customes is sniping parts from our local board? Shocking. I don't know what to make of this Vern. lol

Lon

 

Hey, Lon, gotta get what ya can when/where you can within reaason!!!!

 

Pablo,

have you sold the headers and y pipe? I am in San Diego so have no problem driving north to get them.

Thanks

Bill

 

Headers and y pipe have been sold, as has the catback


there seems to be alot of demand for the wires, wanna outbid the next guy on them? btw they are all 90 degree boots

 

.

 

I agree with Dean, not interested in an auction. Besides, I never heard of blue MSD wires, so I'm not interested any more.

 

http://www.msdignition.com/wire_2.htm

What do you know about that...
Hell they have been making blue wires since the beginning of time.

 

And...still junk IMO (touch'em and get nailed)

 

pfft haha, ask irockz_newbie if im a swindler, i just sold him my entire exhaust.

I'll sell whatever the hell I want for however much I want, If you dont like it you can eat a dick

 

ill add that this is over a set of wires im practically ****ing giving away, 10 dollars, another guy beat him to it and if he wanted them all it would take is him to make me a decent offer to tell the other guy i found a local seller.

Thats how capitalism works you ***** and I welcome you to come and call me a swindler to my face there tough guy, im at qualcomm drags nearly every friday.

 

I dont particularily care for the wires myself either.

 

.

 

oh this is going to be good

 

Welcome to the Socal Bitchfest Board.

You are now both honorary members. Thank you for joining, your sign will arrive shortly.

 

Wow, what a great way to get people to buy your stuff. Bitch them out and call them names. It'll be the next big thing on Ebay.




By the way, please shrink the image in your signature. Its too long and causes people to have to scroll left and right to read the text.

 

.

 

Boyz, don't think we need to get that worked up over this, but I do agree the "seller" has a bit to learn about ethical selling practices.....

As for the blue MSD wires, you're right - they're cheapie version does come in blue. My mistake, I ASSumed they were the good MSD 8.5 wires, which they aren't, so I'm not interested.

However, that being said I would never want to be a part of outbidding someone you've already told you would sell them to for a price so you could lie to them and tell them they had been sold locally.

Maybe I'm a fool, but I prefer more honest transactions that that.

Pity you don't too.....

 

More big talk...

I told you where you can find me. Grey T type. Probably wont be there this friday since ill be busy. IF you really want to come and see me you can go ahead and come to Camp Pendleton and we can have a "period of instruction" in the martial arts field here on the air station. No one will bother us, trust me.

 

In my haste to post I neglected to note that you arent local. I have quite a few people I'm speaking to at once. They are not cheapie wires, they run around 70 dollars for the set. If you dont want them then dont post, I dont care to hear your opinion on parts I'm practically giving away.


as far as my signature image,
if your resolution is so low or monitor so small that you need to scroll over because of my sig, you need to step into 1997 and upgrade your system. I have used this board from computers spanning the globe and never had a problem on posts with my sig.


Regarding me selling the parts, im going to sell them either way, whether you like them or not or all you have is negative things to say about them because people know I'm honest (if not ill be held accountable at work) and I'm selling for extremely reasonable prices.

 

...

 

Awww... this is the Pablo i remeber from back in the day, where have you been?

 

it has been awhile

how ya been man?

BTW that 454 TBI unit has your name written all over it Im flexible as far as delivery/pickup is concerned too if you wanna work something out.

 

Aww man, im going over to the dark side (super ram) so no TBI for me anymore...
That 9" rear is looking kind of intriguing though. I might have to roll a few old ladies though to get the funds.

 

Yeah its a nice piece, as i said before, im flexible. Let me know anytime if you want it. Id definately like to sell that local.

 

How much are you charging for ringside seats?

 

that had to be the funniest thing i have read in a while.. i just pictured some jar head flying into a damn dumpster, strapped to a racing seat... ahahhahaha

your attitude is a disgrace to the uniform you wear..
this guy needs to be banned

 

Personally, I think it would be fun to watch.

A little rephrasing here, the BS stops when the bell rings.

Keep me posted, I want to see this.

FYI, in case some haven't noticed money talks. I bought a car out from someone else as the other guy didn't offer full price, I did, cash in hand, and drove the car home.

 

.