I know you are out there...

 

There's plenty of us in OC.

Check out the club message board @ http://www.sc3g.org/thetrack/ if you haven't already. You can find the dates and times of our meets. I believe our next meeting is the 7th of April.

 

Most of us are in OC and LA counties. Whatcha need?

 

costa mesa here

 

south central santa ana

 

i see so many third gens in santa ana wonder if they all post/lurk here

 

Buena Park here.. (north OC)

What part of OC are you located?

 

I see so many from the valley but just like to know which and how many third geners are a little closer to home. I have been doing pick a part runs so if anyone needs anything in particular let me know and I can keep an eye out. I'm in Santa Ana now.

 

I wonder too! There's a 3rd gen on every block where I live! And every other house has a mechanic (or somebody who thinks they are) living there.

I mentioned the website to one of my neighbors once (I think they were trying to swap in an LS1) and they didn't show any interest in using the internet to talk about cars. I guess, if you need to fix your 3rd gen around here you just go next door!

 

There is a bike night at hooters off Katella (Oarnge, I think) it's first Friday of each month. (Sport bikes). But might be kinda nice to meet up and see each others third gens too. You can check out the bikes (Some are real custom) and the riders are real nice group. I will be there this time so hope to see you there too!

 

Hey people

Im in costa mesa. Ive always wondered about thirdgeners in this area.
It would be nice to meet up some time.

R--->C

 

Hey Jeremy... you got another third-gen??? what happened to the purple haze z28?

 

I'm in Yorba Linda.

 

The beautiful city of Anaheim here!

 

"North" Tustin here

 

Anyone want to meet up this Friday?

I will be at the Hooters off Katella and the 57fwy. Best wings and peel n eat shrimp...Yummmm! Id like to see what you all have done with your rides! I will have my RS! 7:00 pm about

 

I work, but alot of us are going to be at Ricky & Ronnies in torrance on Saturday.

 

Does anyone have a code reader that they might be able to bring to the meeting with them? my service enigine light came on.. and I need to find out whats wrong.

 

Just put a jumper wire from the a to b terminals on the aldl connector under the dash and turn the ignition on without starting the car.The service engine soon light will flash 1 pulse then 2 pulses (three times- This is showing it has entered the diagnostic mode0 then immediately after code 12 it will down pulses for any other error codes stored, when finished it cycles back to cde 12 again and start over until you turn the ignition back off them make sure you pull the jumper wire out before starting the car.Note- any code will pulse three times, then it goes to the next code and again that one will pulse three time, and so on. ex -3 pulses then 4 pulse, 3 pulse then 4 pulse, 3 pulses then 4 pulses= code 34

With all the crap I have been through last month, I have the next few days off from Thursday to sunday so I just may grab the wife and drive out to check out a meeting again and see Ricky and Ronnies and get the heck out of the house and relax. Thats pretty far though for just going to a hamburger joint.
Edit- Just realised the meeting is Saturday Night- I will be at Irwindale.

 

Use the method Dean described and I can also throw my Auto X-Ray in the car and bring it on Saturday.

 

Wow, where did you learn that trick? So smart! I love just love this site!

 

The FAQ and/or the tech articles on this site list the procedure for using a paper clip to check the codes, as well as the codes themselves. This trick works on any car with the 12-pin rectangular OBD1 ALDL connector.

 

Hey I have seen a few chicks in third gens cruisin through Santa Ana. I have the black rs with t-tops. Which is yours? post a pic !

 

http://www.cardomain.com/ride/556930

I haven't updated it in a few months.

 

Never fails.

 

 

 

.......because that's why I am here right?

 

yeah thanks for the bandwidth "mr cadillac".... see you around lol

 

Hey Julegta, /Were you out on thurs night GG to Anaheim area? Saw gold rims dark green car, chick driver...I thought it might be but not sure.

 

Hey, Im in Irvine. I see about 3-4 other third gens driving around here. Anyone on this site??

 

Yep that was me! My car is up and running at last!

Did you have a really nice looking black camaro in the lane next to me? You need to bring it to the next meeting!

 

North Tustin Here also!

 

hee hee! lol, yup it was me! You drive as crazy as I do (j/k) and I can hear your exhaust a mile away (atta girl) ! Your car looks much nicer than the pics. I am going to try to make the next meeting I have lots of qestions and would love to meet other third geners too!

 

Just an FYI. I just got new black leather-like seats from classic but here is the thing I had a guy install them for only 2 honeys.
He picked up my car at 9am and had it back by 4pm same day. If anyone is interested in using him you can pm me.
I am pleased with his work.

 

those look really good... your rs is coming along nicely

 

Thank you.
I guess I am getting the front end painted because it got hit/run in parking lot. Anyone hear of a camaro meet friday nights in brea (the hat)? Someone told me about it but not sure....?

 

Yes a few cars meet at The Hat sometimes, but its usually LS1's.

 

Anyone know a good shop? Cracked head/new headers? How much am I looking at?
Oh got new chromed 18" iroc rims. Yay!

 

Is the head aluminum.Cast iron heads arent really worth fixing, i believe.It would probably cost you as much.If not more with machine work afterwards than to just buy replacement cast iron(aftermarket) heads.As for cost i say around $2k to maybe $2500.Buy the way what type of sportbike do you ride.I just bought me a R6(raven).Nice rims....

 

Wow cracked head. Do you have a 305. Not sure but bet you could use some 113 alum vette heads. See if Don has a set of headers 1 3/4 might be a bit big but those headers are the best I seen. Mine being a Vortec I got the advantage of the raised ports. Match up well.

 

I live in La Mirada, just on the border of LA and Orange Counties...

I see lots of third gens around town, infact, there is a blue firebird around the corner from me...

And I always see a red v6 camaro with 20'' Chrome IROCs...



Thats a nice bike. interested in parts/accessories/apparel? I work for Yamaha and can get you a pretty good deal...


-Tim-

 

I have a 305, but not sure if its aluminum or not. I guess its time for some home work. Ideas are always welcome cause Im still a little new at this.

I had a gsxr 750 and a few ninjas zx7 and zx9 but have taken out most kinds of sport bike.
may need a new helmet soon...getting a new bike after summer.

 

Uh oh...2 crazy 3rd gen driving chicks in OC.
I think i am gonna stay indoors for a while now

 

Hey troy, pm me. cant get my emails.

 

TWO! Who's the other one.Does she also ride a bike!!!!!

 

Im 99% sure youve got cast iron heads.If its stock they are cast iron.What did you do with all those bike.Ride them till they died?

 

Down boy, down!! The other one is Julie, and she doesnt ride a motorcycle.

 

Woof......

 

Thank God for small favors.

Although with one she could increase the local cities budgets even more than in the past.