can anyone that has used the lca relocation brackets tell me how much lower than oe thay mount the lca's. looks like stock from the bottom of the axle tube to the bottom of the mounting hole is appox. 2 inches. any info would be appreciated! I installed a Moser 9 inch rear in my 89 z and have had terrible wheel hop that i never had before??
thanks tpiz28

 

Welcome to Thirdgen.org!


I just measured my BMR Weld In brackets. The 1st set of holes is 2" lower than stock, and the 2nd set of holes is 3" lower than stock. Measurements are probably consistant with other brands of brackets.

 

Welcome!


You want the LCA to be parallel to the ground. Pick the holes accordingly.