i'm going to put in a th350 in my 92 camaro and i'm looking at this torque arm out of jegs and i'm wondering if anybody already has used this or know if this is a good part to get. pt# 550-40095
thanks for any info

 

I'll tell you its better then stock. The only stock option would be from a 200C car.

 

Dont know about the jegs arm. But I do know if

MY CAR can leave like this with the stock arm, stock cant be all that bad. Just my 2 cents.

 

And im sure theres been stock 3rd gen motors to survive a 200 shot once or twice, some have put 10 PSI to high c/r LT1's for a bit, does that mean run out and follow what someone else got lucky or got by with ?

 

Luck has nothing to do with it. This arm has been putting up with this kind of abuse for over 6 years now. thousands of passes down the 1/4 mile.

 

Guess you just cant help those that dont want to be helped.

Back on subject, I believe I have seen a good bit of negative about the Jegs one in particular, you might want to take a look at the Spohn and BMR pieces, both are available to fit our cars.

 

Guess your right.
Here are some links to some good reading on TQ Arms.

http://web.camaross.com/forums/showt...instant+center

http://web.camaross.com/forums/showt...instant+center

http://web.camaross.com/forums/showt...instant+center