Woohoo!! I received my lca's and PHB from www.hotpart.com today! So I imediently went to work....started at 5p.m and drove off at 9:15. You talk about a time consuming job, I'll never do this by myself again. But I did the driverside lca first...replaced, tighted, then moved on to the PHB, this is were things got interesting...My stock bar was bent probably 35-45 degrees inward!!! ( no wonder why it rode so rough ) I'll have pics of the install and bent bar tommorow. But the PHB was a breeze to take out, and replace. Then I went to the pass. side lca...and this probably took 1- 2 hours getting OFF!! the front bolt came out no problem...but I was stuck on the rear. I beated, pryed, punched, everything you can imagine to get that bolt to slide through. But after ruining the bolt/nut - and BFH - it came free. Then I put all my tools up, and took it for a drive. All I can say is holy hell batman! This made a WORLD of a difference on handling, and ride quality. BEFORE - If I held my foot on the brake and gave it some gas, I could feel the rear, almost buckle. The car would jump up and around etc etc. But now everything is SOLID! The rear actually follows the car now! I'd reccomend these upgrades to ANYONE who hasn't yet. I just thought I would share my experiences with these products/company...In the end, it was WELL worth the time and money