Moog Springs
Thread Starter
Senior Member
Joined: Apr 2002
Posts: 514
Likes: 0
From: Deer Park, N.Y.
Car: 1983 z-28/SFC/bilsteins/adj.arms
Engine: 355sbc/Demon650dp/hedmanheaders/
Transmission: t-5, alum DS
Axle/Gears: 3.42 torsen posi, baer discs
Moog Springs
where do i buy moog springs from? can someone give me the link? also does anyone know the rate for the moog rear spring? is it just stock replacement or can you order stiffer ones? i'm looking for stock height 175-200lb rears. thanks
Supreme Member
Joined: Jul 1999
Posts: 18,457
Likes: 16
From: Loveland, OH, US
Car: 4
Engine: 6
Transmission: 5
Your local parts store. Call around. Real parts stores, maybe not AZ, CSK, Advance, etc.
NAPA also carries Moog, but private-labelled with NAPA part #s. Costs a little more that way but you know where to go.
Moog's part # for the rears is CC635. It's about 175 lbs/inch. Approximately stock height.
NAPA also carries Moog, but private-labelled with NAPA part #s. Costs a little more that way but you know where to go.
Moog's part # for the rears is CC635. It's about 175 lbs/inch. Approximately stock height.
Thread Starter
Senior Member
Joined: Apr 2002
Posts: 514
Likes: 0
From: Deer Park, N.Y.
Car: 1983 z-28/SFC/bilsteins/adj.arms
Engine: 355sbc/Demon650dp/hedmanheaders/
Transmission: t-5, alum DS
Axle/Gears: 3.42 torsen posi, baer discs
thanks for the info..................will check it out!!!
Thread Starter
Senior Member
Joined: Apr 2002
Posts: 514
Likes: 0
From: Deer Park, N.Y.
Car: 1983 z-28/SFC/bilsteins/adj.arms
Engine: 355sbc/Demon650dp/hedmanheaders/
Transmission: t-5, alum DS
Axle/Gears: 3.42 torsen posi, baer discs
thanks MKOS.......there's a autozone right near me!! is it true the stock rear coils were the same rate for the irocs, z-28s, v-6s...every model? i have a '83 z-28 and the rears are way too soft for autoX..i hope the moogs have a bit more umph!
Thread
Thread Starter
Forum
Replies
Last Post
LT1Formula
Engine/Drivetrain/Suspension Parts for Sale
7
Oct 8, 2015 08:34 PM




