I have a set of rod ended control arms on the rear of my car. Theres rod ends on both ends. Im having a problem with play in the bolts. The rod end seems to have a wider hole than the bolt which goes thru it. I can move the rear front to back. Do I need new bolts to go with these arms? I didnt get any when I bought them. What do you guys think could be up.
matt

the issue is probably that, while the stock bolts on the car are 12mm, the bolt holes in the arms are probably 1/2" if this is the case, and you want to continue with them, you can drill out the mounting holes to 1/2". or see if you can get the right size spacers

Drilling out the holes is what I was thinking. Im just wondering if anyone else here has had the same problem.
Matt