wheel size?
Thread Starter
Junior Member
Joined: Sep 2008
Posts: 22
Likes: 0
From: wisconsin
Car: 84 Z28 L69
Engine: 305 H.O
Transmission: 700r4
Axle/Gears: factory 10 bolt 3:73 posi
wheel size?
what is the widest 18" wheel i can use on my 84 z28? as well as the best tire size? i would like low profiles.
Banned
iTrader: (12)
Joined: Jul 1999
Posts: 12,212
Likes: 13
From: Bertram (outside Austin), TX
Car: 87 GTA
Engine: L98
Transmission: 700R4
Axle/Gears: Dana M78 3.27 posi
Re: wheel size?
PLEASE use the
feature!
I SWEAR....NEWBIES never use the
feature anymore....There are other people asking this EXACT SAME question....RIGHT NOW! How many times are newbies gonna ask this, when it has been asked AND answered 1001 times....
Sorry.....Just frustrates the HELL out of me, seeing the same old questions asked, week after week after week, when the answers are CLEARLY already on TGO.
feature!I SWEAR....NEWBIES never use the
feature anymore....There are other people asking this EXACT SAME question....RIGHT NOW! How many times are newbies gonna ask this, when it has been asked AND answered 1001 times....Sorry.....Just frustrates the HELL out of me, seeing the same old questions asked, week after week after week, when the answers are CLEARLY already on TGO.
Joined: Aug 2006
Posts: 12,804
Likes: 103
From: Central NJ
Car: 86 Trans Am
Engine: 408 stroker sbc
Transmission: TKO600
Axle/Gears: Moser full floater m9, 3:70 trutrac
Re: wheel size?
you can fit an 18x11 with the proper backspacing and some hammering of the front fenderwell, maybe on the bump stop area as well.
It will have to sit flush with the outside of the car and it will be tight to the bump stop and lower control arms.
But yes, use the search function please, this topic has been covered many many times, most threads will be on 17x11's, but the backspacing and such will be the same.
the largest issue you will run into is finding the proper size tire. after 17" the price goes waaaay up, and a 315/30/18 or a 305/30?/18 are not that common, most common is a 295, and that will fit on a 10 nicely., and the selection is limited. You need something around25.7 to 26" in diameter
a 295/35/18 would be a good choice, on a 10 or 10.5" wheel. It will fit pretty well, and you have a decent selection of tires. 6.5" of back spacing would be a good choice for a 10" wheel.
Do you need that wide of a tire?
It will have to sit flush with the outside of the car and it will be tight to the bump stop and lower control arms.
But yes, use the search function please, this topic has been covered many many times, most threads will be on 17x11's, but the backspacing and such will be the same.
the largest issue you will run into is finding the proper size tire. after 17" the price goes waaaay up, and a 315/30/18 or a 305/30?/18 are not that common, most common is a 295, and that will fit on a 10 nicely., and the selection is limited. You need something around25.7 to 26" in diameter
a 295/35/18 would be a good choice, on a 10 or 10.5" wheel. It will fit pretty well, and you have a decent selection of tires. 6.5" of back spacing would be a good choice for a 10" wheel.
Do you need that wide of a tire?
Last edited by //<86TA>\\; Feb 23, 2009 at 08:06 PM.
Thread Starter
Junior Member
Joined: Sep 2008
Posts: 22
Likes: 0
From: wisconsin
Car: 84 Z28 L69
Engine: 305 H.O
Transmission: 700r4
Axle/Gears: factory 10 bolt 3:73 posi
Re: wheel size?
ok that helps alot thanks for the info. and for the *** on the first reply im sorry that i interrupted your little tea party. if it pisses you off so much don t reply. and save yourself the embarassment of looking like an *** on the internet im only trying to find the correct answers and i have kids so i don't getr alot of time to use the SEARCH feature. give me a break!!!!!!!!
Banned
iTrader: (12)
Joined: Jul 1999
Posts: 12,212
Likes: 13
From: Bertram (outside Austin), TX
Car: 87 GTA
Engine: L98
Transmission: 700R4
Axle/Gears: Dana M78 3.27 posi
Re: wheel size?
ok that helps alot thanks for the info. and for the *** on the first reply im sorry that i interrupted your little tea party. if it pisses you off so much don t reply. and save yourself the embarassment of looking like an *** on the internet im only trying to find the correct answers and i have kids so i don't getr alot of time to use the SEARCH feature. give me a break!!!!!!!!
3 kids of my own...7-17....Don't use your kids an excuse for being lazy. Not only that.....You'll get your answer within a few minutes....
He basically said the same thing too....
"But yes, use the search function please, this topic has been covered many many times, most threads will be on 17x11's, but the backspacing and such will be the same."
But by GIVING you the answer, he has "handicapped" you, by not giving you more impulse to do get the answer yourself.
Besides that.....Can you imagine how much the TGO database size could be reduced by, if the same question wasn't asked 100 times?
Thread
Thread Starter
Forum
Replies
Last Post
toronto formula
Engine/Drivetrain/Suspension Parts for Sale
15
Nov 10, 2015 06:17 AM
knight72
Engine/Drivetrain/Suspension Wanted
0
Aug 10, 2015 09:32 PM





