Brake bushings
Brake bushings
My car pulls to the right when I brake. After jacking up the front end and inspecting the bushings, i found that the left side does not slide as easily. I lubed it up, but that didnt seem to help. Will simply replacing the gaskets around the bushings solve this problem?
------------------
86 IROC TPI
No mods to date = not enough experience = looking for help
------------------
86 IROC TPI
No mods to date = not enough experience = looking for help
when i get a bushing that binds up i put it in my lathe and polish it and put it back with whire grease for lube.
------------------
ICON Motorsports
1st & 3rd
------------------
ICON Motorsports
1st & 3rd
TGO Supporter
Joined: Sep 2000
Posts: 6,775
Likes: 27
From: So.west IN
Car: 87 Formula/ 00 Xtreme
Engine: TPI 305/ v6
Transmission: struggling t-5/ 4l60E
Axle/Gears: 3.08/ 3.23
A problem I was made aware of is that the mid 80's vehicles brake lines were prone to the brake line swelling up over time. This keeps pressure from building on short distances and locks the brake eventually over longer(more braking)periods because the fluid cant drain back. This might not be your problem,,,but it was mine when I got my beater camaro, I found this out when I did the brakes on a friends 84 truck and another friend who was a mech told me the prob after I did everthing short of replacing the rubber line. After replacing the line & a brake bleed,,,,perfect,, 3 yrs & going.
------------------
My Firebird & other stuff
- 4 out of 5 people think the 5th is an idiot
------------------
My Firebird & other stuff
- 4 out of 5 people think the 5th is an idiot
Thread
Thread Starter
Forum
Replies
Last Post
dbrochard
Engine/Drivetrain/Suspension Parts for Sale
6
Sep 19, 2015 08:13 PM





