I was looking for a good set of replacement springs for the camaro.
I dont really want to drop the car much, and I want to keep the ride quality high.

Anyone got any suggestions?

------------------
http://kiztope.50megs.com
92 Rs 3.1/T-5
KYB Shocks and Struts, Blue Streak cap and rotor, neato new radiator!, RapidFire plugs

An overhead console!!
Clarion Head Unit,
Pioneer 6x9's,Cerwin Vega Plate 4x6's
.....
Its slowly but surely coming along....

AIM : Theonekiztope
ICQ: 8787542
Planetarion: 3GFB kiztope of kiztopia-Camera-92RS-A (33:6:14(?))

"No one knows until they learn" Leon Calrinsky (99)

 

nobody ever replies to these. I dont know much about the springs, but I got a set from Intrax for $100 for all 4. Ofcourse this was a special promo I found on Ebay

------------------
86 Trans Am 355 TPI Rebuilt 700R4 with Corvette servo, modified valve body, and a B&M Torque Converter (2000 rpm stall w/ lock up), 87 350 block bored .30 with new crank. Reworked 305 heads with 3-angle valve job. Added in the rebuild was an SLP TPI cam, BBK 58mm Throttle Body,MSD 6A, Hypertech Power Coil, 1.5 Crane roller tipped rocker arms, SLP Intake Runners and Port matching in upper intake including fully ported plenum, TPIS adjustable fuel pressure regulator @ 46psi, Hooker shorty style headers w/ Thermotech heat wrapping, Custom 3” exhaust with Flowmaster muffler and chrome quad tips, Hypertech Thermomaster Computer chip, K&N open element cone filter on modified MAF per TPIS specs, MSD Wires, removal of A/C hardware and added a 1LE firewall cover installed. Also there has been a PST front suspension kit with Hotchkis strut tower brace added. Soon to have Intrax lowering springs.
http://geocities.com/SunsetStrip/Garage/9548/kyle.html

Kills:
95 Talon TSI, 96 Probe GT, 91 T/A L98, 89 RS, 86 Mustang GT, 88 Mustang LX 5.0, 92 Thunderbird V8. couple or ricers that I think were Civics or Preludes not sure what year, 95 Celica GT-S, 94 Chevy 1/4 ton 350, one of those NASCAR F150's

The Third Gen Will Never be Forgotten

 

Do you like them?
Do you know the lb rating on the back?

Thanks,

 

HAven't installed them and don't know the rating

 

I've used the ground zero springs. They are really MOOG springs (at least mine were) and they were very good, a little stiffer and the corresponding ride quality was a bit rougher, but it's expected.

------------------
"A lawyer with his briefcase can steal more than a hundred men with guns."

-Mario Puzo

 

So if youhad a choice, would you buy the Ground Zero springs again, or maybe a set of IROC springs from GM......

This is my choice right now..