Well sometimes it pays to look in something other than a camaro or even a chevy mag. I have found 2 inch wheel spacers for 5 on 4.75 spacers for $59 a set. I know this leaves 1/2 inch differance but I think you can find a 1/2 spacer for real cheap. The ad also says they can build/make any sized spacer. Anyway this ever valuable info was in Augusts issue of truckin page 163. Well the company name is AIM and they are in Arizona and the number is 1800-289-9980. Anyway I just thought that some of you would appriciate this info. Better than paying 90 plus per spacer!!!...And yes they appear to be made of aluminum, weither its billet or not I don't know but would imagine it is...

They also gave me a **** load of ideas for mods too....

------------------
Kills to date a 3.1 firebird 2 stop lights in a row.
95 Grand Am
Serveral Honda's
a friends 91 Rustang LX(I know its a 4 but he keeps trin')

Planned mods:
Soon coming 3 inch exhaust, 1.6 rockers, High flow 'Verter, and Ignition system. Along with a complete turbo 4.3 swap planned later this year(hoping to get into the 10's..)
Current mods:
Set of Iroc sway bars front and rear..amazing differance, Air box bottom completely removed allowing my K&N to act like an open element filter.
Lower profile tires, 195/55/15 front 205/55/15 rear handles better.
And a 160 deg thermo for a V8(and yes it works just fine)

Sterio Sony CD head unit and 9 band EQ, Boston acutics 4x6 dash, Alpine 3 way 6x9 sail, California sounds active crossover, Kroiiler 600 watt amp powering the 'pines and Bostons, 600 watt Jensen powering 2 Rockord Fosgate RFZ1812 subs. And all this cost less then $575...

 

Cool, thanks for passing on the word.

BTW-

You should update your sig. to include what kind of ride you own.


------------------
Mike L.

"If it feels good - stay in it "

1987 IROC Z TPI 350 A4 3.27 Borg-Warner.

Mods: 2300-2500 Stall Converter, Shift Kit(GM parts), TPI Specialties Stage 3 PROM, Modified Airbox w/ K&N's, homemade cold air, Relocated MAT sensor, Gutted MAF, 160* thermostat, Accel 8mm Wires, bypassed TB coolant, Flowmaster 3 chamber single 3" in/out muffler, 3" MAC mandrel intermediate, custom dual !cat Y-pipe. airfoil, ported plenum. !smog

http://www.MichaelLasiuta.home.att.net

**BOYCOTT LAPEER DRAGWAY**

 

LOL sorry I got 2 cams'. 92 3.1 and a t top 91 w/305 I'll add now LOL...

 

Do they have a web site? I'd like to take a look at the spacers.
bsa

 

Sorry not that I know of...just look in this months issue of truckin'..page 163 I think I said?...And if nothing else it's a 1-800 number so it's free at least...