Tapping noise, please help
Thread Starter
Member
Joined: Nov 2000
Posts: 343
Likes: 0
From: Snellville, GA USA
Car: 90 Formula
Engine: 350
Transmission: 700R4
Tapping noise, please help
There is a tapping noise coming from my front passenger side wheel. It is to the rythum of how fast my wheel spins. Rotors, pads, calipers, inner and outer bearings just replaced, and it makes the same noise.
Any ideas or guesses are appreciated.
------------------
1990 Formula 350
Hooker Headers, Random Technology Exhaust w/ no cat, K&N, Airfoil, AFPR, MSD 6A Ignition, Performance Resource chip, Metco LCA's w/ brackets, F Body Perf. Panhard Rod and Strut Tower Brace, KYB AGX shocks in the rear, A 3.08, open, drum rear end installed by previous owner (good choice), 1999 Formula Wheels, White Face Guage Overlays
Any ideas or guesses are appreciated.
------------------
1990 Formula 350
Hooker Headers, Random Technology Exhaust w/ no cat, K&N, Airfoil, AFPR, MSD 6A Ignition, Performance Resource chip, Metco LCA's w/ brackets, F Body Perf. Panhard Rod and Strut Tower Brace, KYB AGX shocks in the rear, A 3.08, open, drum rear end installed by previous owner (good choice), 1999 Formula Wheels, White Face Guage Overlays
Supreme Member
Joined: Jul 1999
Posts: 18,457
Likes: 16
From: Loveland, OH, US
Car: 4
Engine: 6
Transmission: 5
Swap your 2 front wheels and see if it moves to the other side. I'd bet it's a wheel or tire.
------------------
"So many Mustangs, so little time..."
ICON Motorsports
------------------
"So many Mustangs, so little time..."
ICON Motorsports
Joined: Jul 1999
Posts: 1,421
Likes: 24
From: Stavanger area, Norway
Car: 86 IROC Convt
Engine: 305TPI
Transmission: TH700R4
I just found out this weekend that replacing the struts took care of a LOT of weird front end noise.. One of them being a weird "click" noise at full turn...
Maybe something to look into unless yours are fairly new..

Ken
------------------
1986 IROC-Z Conv't
17x9.5 TT II's w/ 275/40x17's, BMR stb, Lakewood APR, Jamex 1.5" Lowering Springs
ChevyKen's Cars
Administrator @ ChevyWorld.net
Maybe something to look into unless yours are fairly new..

Ken
------------------
1986 IROC-Z Conv't
17x9.5 TT II's w/ 275/40x17's, BMR stb, Lakewood APR, Jamex 1.5" Lowering Springs
ChevyKen's Cars
Administrator @ ChevyWorld.net
Member
Joined: Jul 2001
Posts: 118
Likes: 0
From: World of Hurt, Va
Car: 88 IROC
Engine: 305 TPI
Transmission: 700R4
From my day working in a service station... Check around the whole tread, you may have a nail or screw stuck in it that taps every time it comes around and hits the pavement.
------------------
88 IROC with cobbled together (not by me)drivetrain, 86 (?) TPI unit on an '83 305,CE subframe connectors, Edelbrock strut tower brace, polygraphite bushings all around...it handles like a dream, but man is it hard to push!!
------------------
88 IROC with cobbled together (not by me)drivetrain, 86 (?) TPI unit on an '83 305,CE subframe connectors, Edelbrock strut tower brace, polygraphite bushings all around...it handles like a dream, but man is it hard to push!!
Thread
Thread Starter
Forum
Replies
Last Post
sjorgens
Suspension and Chassis
7
Oct 1, 2015 07:54 PM
dimented24x7
Tech / General Engine
4
Sep 6, 2015 03:51 PM







