A little help with drop spindles
Thread Starter
Member
Joined: Oct 2007
Posts: 112
Likes: 0
From: Berrien Springs, michigan
Car: 92 Camaro z28
Engine: LQ4 6.0L Vortech w/ aluminum heads
Transmission: 4l60e
Axle/Gears: 3.42s from 99-02 WS6
A little help with drop spindles
hi there, i found a guy on ebay selling 2 inch drop spindles from an 83. my question is i dont know what drop spindles are surpose to look like but they look like the stock spindle. my question is did GM ever produce drop spindles? or is there anything i should look for. i recieved them today and i am updragding to LS1 brakes so these will be modified for the new brakes. hey thanks in advance
Joined: Aug 2006
Posts: 12,807
Likes: 108
From: Central NJ
Car: 86 Trans Am
Engine: 408 stroker sbc
Transmission: TKO600
Axle/Gears: Moser full floater m9, 3:70 trutrac
Re: A little help with drop spindles
gm never made on. if it looks like a stock style cast spindle, it may be a belltch spindle since they did produce them some time ago. the difference would be that the spindle snout (part the rotor/wheel goes on) is moved up in relation to the lower balljoint.
post a pic if you can and we may be able to help more
post a pic if you can and we may be able to help more
Joined: Jul 2000
Posts: 1,519
Likes: 18
From: Fort Myers, FL
Car: 91 Firebird
Engine: 6.0
Transmission: T56
Axle/Gears: 3.73
Re: A little help with drop spindles
They look like drop spindles to me
Here are some regular spindles
http://www.ebay.com/itm/1982-92-CAMA...sories&vxp=mtr
Here are some regular spindles
http://www.ebay.com/itm/1982-92-CAMA...sories&vxp=mtr
Thread
Thread Starter
Forum
Replies
Last Post
