Iroc sagging
Thread Starter
Member
Joined: Apr 2015
Posts: 127
Likes: 65
From: long Island NY
Car: 1989 iroc z
Engine: 5.7
Iroc sagging
My Camaro is sagging on the drivers side by about 3/4 of an inch. Some of the springs were worn so we replaced them all with no improvement. I was going to replace the worn out rear isolators with ones from ecklers (Rick's camaro's) but they don't have a notch for the spring. Has anyone ever used these.
Last edited by dm3k; Jun 14, 2016 at 05:57 PM.
Junior Member
Joined: Dec 2014
Posts: 23
Likes: 0
From: Lockport il
Car: 1984 transam
Engine: 406 sbc
Transmission: Turbo 400
Axle/Gears: Moser 9 inch
Re: Iroc sagging
My Camaro is sagging on the drivers side by about 3/4 of an inch. Some of the springs were worn so we replaced them all replaced with no improvement. I was going to replace the worn out rear isolators with ones from ecklers (Rick's camaro's) but they don't have a notch for the spring. Has anyone ever used these.
Thread
Thread Starter
Forum
Replies
Last Post