does anyone know if the GMPP 350HO will work with a TBI system from a fullsize truck that had a 350 in it. i was thinking about doing this swap and taking the wiring harness, sensors and ecm from the truck and mounting them on this crate engine but didn't know if this application would work.

 

it si a good swap. several people have put teh 330hp vortec crate motor into tbi cars with a lot fo sucess.

later
tim

 

i have a lot of info on this swap on my web page. its at z28boy.cz28.com .

check it out and you may have a lot of your questions answered. if not, shoot me an email.

-brian