TBI Throttle Body Injection discussion and questions. L03/CFI tech and other performance enhancements.

need help

Thread Tools
 
Search this Thread
 
Old Mar 26, 2003 | 09:09 PM
  #1  
badboy's Avatar
Thread Starter
Junior Member
 
Joined: Mar 2003
Posts: 54
Likes: 0
From: canada
need help

91 2.8 5 speed tbi, i'm havving this problem, when im driving the car will be fine and sometimes i'll be stopped at a light and the motor will just start revving high at about 3000 rpm's what could be causing this, today it didnt 5 times on me then it will go back to 1000 your help would be greatly appreciated
Reply
Old Mar 26, 2003 | 09:18 PM
  #2  
CrispyClutch's Avatar
Member
 
Joined: Jan 2003
Posts: 272
Likes: 0
From: Arcata, California
Sounds vacuum related.
Reply
Old Mar 26, 2003 | 10:03 PM
  #3  
CrispyClutch's Avatar
Member
 
Joined: Jan 2003
Posts: 272
Likes: 0
From: Arcata, California
See if you can pull a code.

Unscrew the AIC and see how it looks...

Possibly the O2 sensor....

ANyoone else have any ideas?
Reply
Old Mar 26, 2003 | 10:39 PM
  #4  
badboy's Avatar
Thread Starter
Junior Member
 
Joined: Mar 2003
Posts: 54
Likes: 0
From: canada
no codes come up i disconnected th i.a.c. and still revving high , then out of nowhere it will just come back down and then up again and its driving me nuts the O2 sensor was replaced about 6 months ago and its seems to be working fine havent had a code since i replaced it, thanks crispy i appreciate your help
Reply




All times are GMT -5. The time now is 01:59 PM.