adaptor plate
Thread Starter
Member
Joined: Apr 2005
Posts: 190
Likes: 0
From: Iowa
Car: 1988 formula
Engine: 93' LT1 Swap in progress..
Transmission: 700r4
Axle/Gears: 2.73
adaptor plate
well im going to buy a intake manifold for my car and i want to get and edlebrock intake but there for 4 barrels but would this work to mount my tbi on the manifold? http://www.jegs.com/cgi-bin/ncommerc...69&prmenbr=361
if it wont work send me a link to somthing that will
if it wont work send me a link to somthing that will
Supreme Member
Joined: Mar 2001
Posts: 6,577
Likes: 0
From: Portland, OR www.cascadecrew.org
Car: 1990 Camaro RS
Engine: Juiced 5.0 TBI - 300rwhp
Transmission: T5
Axle/Gears: 3.42 Eaton Posi, 10 Bolt
No that is to adapt to a 2bbl carb.
You need something like this.
http://store.summitracing.com/partde...=KeywordSearch
17-41 is for spreadbore manifolds, 17-45 is for squarebore.
TurboCity makes an adaptor also.
You need something like this.
http://store.summitracing.com/partde...=KeywordSearch
17-41 is for spreadbore manifolds, 17-45 is for squarebore.
TurboCity makes an adaptor also.
Supreme Member
iTrader: (1)
Joined: Dec 2000
Posts: 1,463
Likes: 0
From: Mesa, AZ
Car: A Camaro
Engine: Weak
Transmission: Weaker
Just be aware that you may have to lengthen your throttle cable/mess with the throttle cable bracket to get everything to hook up right.
Thread
Thread Starter
Forum
Replies
Last Post
monte87cortez
Transmissions and Drivetrain
2
Sep 26, 2015 08:10 PM
