TBI question
Member
Joined: Jun 2004
Posts: 386
Likes: 0
From: San Antonio
Car: 78 Caprice Coupe
Engine: 355
Transmission: 4L60
Axle/Gears: 3.42
Are you asking if the whole intake manifold will bolt up as is or just the throttle body itself? Neither are a direct fit, both can be made to work.
Member
Joined: May 2005
Posts: 159
Likes: 1
From: Lincoln, Nebraska
Car: 1991 Chevrolet Camaro
Engine: GM 5.7L H.O. 350HP
Transmission: Rebuilt 700r4/Shift Kit/Servo
If you buy a TBI manifold that fits the heads (GM Performance, Edelbrock) then the TB unit will be a direct fit (physically) on the manifold.
You'll need a new fuel pump,fuel pressure regulator and/or injectors, and computer work to run a 350 or different heads, though.
You'll need a new fuel pump,fuel pressure regulator and/or injectors, and computer work to run a 350 or different heads, though.
Thread Starter
Junior Member
Joined: Oct 2005
Posts: 25
Likes: 0
From: Fayetteville Pa
Car: 78 camaro/92 camaro rs
Engine: 350/305 TBI
Transmission: at/5 spd
Originally Posted by TierAngst
Are you asking if the whole intake manifold will bolt up as is or just the throttle body itself?
Thread
Thread Starter
Forum
Replies
Last Post