Accel 300+ ignition and spark plug gap
Thread Starter
Junior Member
Joined: Feb 2006
Posts: 26
Likes: 0
Car: 93 Buick Roadmaster
Engine: 350 TBI
Transmission: 4L60
Axle/Gears: 3.08
Accel 300+ ignition and spark plug gap
I was wondering if any of you guys were running the Accel 300+ ignition for the TBI motors and what spark plug gap you set yours at.
I have this ignition on a 93' Buick Roadmaster with the LO5 with msd 8.5 wires and currently have the plugs set at the stock gap of .35 and i'm running autolite copper plugs.
I have this ignition on a 93' Buick Roadmaster with the LO5 with msd 8.5 wires and currently have the plugs set at the stock gap of .35 and i'm running autolite copper plugs.
Thread
Thread Starter
Forum
Replies
Last Post
evilstuie
Exhaust
24
Feb 28, 2016 03:33 PM
