TBI Throttle Body Injection discussion and questions. L03/CFI tech and other performance enhancements.

New Plans

Thread Tools
 
Search this Thread
 
Old Jan 11, 2007 | 11:03 PM
  #1  
Fast355's Avatar
Thread Starter
Supreme Member
20 Year Member
Liked
Loved
Community Favorite
iTrader: (2)
 
Joined: Jan 2005
Posts: 10,404
Likes: 492
From: Hurst, Texas
Car: 1983 G20 Chevy
Engine: 305 TPI
Transmission: 4L60
Axle/Gears: 14 bolt with 3.07 gears
New Plans

I feel that it is time to get serious with my TBI setup. How about 500 FWHP and 13s while still achieving 18 MPG highway with the cruise set at 70-75 MPH? I think it can be done.

My plans for this spring/summer. Let me know what you think guys.

Heavily Ported 906 Vortecs
GMPP TBI-Vortec intake bored to 2"
Whipple TBI supercharger kit (I know they are out of production)
(base plate and rear supercharger plate openings opened up to 2")
Hydraulic Roller "Blower" cam
Richmond 3.73s (again)
BUILT 4L60E

I am shooting for 7-8 psi of boost and 8.5:1 compression ratio.

NA an engine of the specs I am looking at would do about 350 HP. At 7 PSI, I should see nearly 50% more power. That is around 525 HP, now take away some power to turn the supercharger and make the number realistic. I am somewhere between 450-500 HP.
Attached Thumbnails New Plans-0b_12.jpg   New Plans-10_12.jpg   New Plans-5353_12.jpg  

Last edited by Fast355; Jan 11, 2007 at 11:25 PM.
Reply
Old Jan 11, 2007 | 11:57 PM
  #2  
DENN_SHAH's Avatar
Supreme Member
20 Year Member
iTrader: (1)
 
Joined: May 2004
Posts: 2,262
Likes: 1
From: houston
Car: 83 POS monte carlo 2015 chevy P/U
Engine: 92 5.7 tpi 5.3
Transmission: 700r4 6L60E
Axle/Gears: 2.42 too high
is this for your van?
don't you have a bit of a traction problem already?
the words insane & outrageous come to mind.
if, or rather when you get there, i think you'll make more than one LS1 ask "WTF was it that just passed me?"
Reply
Old Jan 12, 2007 | 01:09 AM
  #3  
Fast355's Avatar
Thread Starter
Supreme Member
20 Year Member
Liked
Loved
Community Favorite
iTrader: (2)
 
Joined: Jan 2005
Posts: 10,404
Likes: 492
From: Hurst, Texas
Car: 1983 G20 Chevy
Engine: 305 TPI
Transmission: 4L60
Axle/Gears: 14 bolt with 3.07 gears
Originally Posted by DENN_SHAH
is this for your van?
don't you have a bit of a traction problem already?
the words insane & outrageous come to mind.
if, or rather when you get there, i think you'll make more than one LS1 ask "WTF was it that just passed me?"
Yes, for my Van

I do have a traction problem out of the hole, more so with the old weiand.

lol

Maybe when it is all said and done, I will toss a pair of slicks on it and see what it will really do. I want to do better than a 2.08s 60' time. My 305 made it to the 60' quicker than the 350 ever has.
Reply
Old Jan 12, 2007 | 01:31 AM
  #4  
DENN_SHAH's Avatar
Supreme Member
20 Year Member
iTrader: (1)
 
Joined: May 2004
Posts: 2,262
Likes: 1
From: houston
Car: 83 POS monte carlo 2015 chevy P/U
Engine: 92 5.7 tpi 5.3
Transmission: 700r4 6L60E
Axle/Gears: 2.42 too high
that thing will be 1 wild ride

2.08, your already quicker to 60' than i am, 2.2 is my best so far with a open 2.42 on street tires.
Reply
Old Jan 12, 2007 | 11:30 AM
  #5  
rockit's Avatar
Senior Member
iTrader: (3)
 
Joined: Jun 2005
Posts: 785
Likes: 0
From: Middleburg Hts. OH
Car: 85 T/A, 92 Rs
Engine: L98:D,L03:<
Transmission: 700r4x2
Axle/Gears: 3.23 bw, 2.73 10 bolt.
holy skyscraper batman..
hey fast, a position on the A-team just opened up, you should check it out
something about a van that can 1) punch a hole through the chrysler building and 2) blow 50% of our forum away in the 1/4 just disturbs me.
Reply
Old Jan 12, 2007 | 11:07 PM
  #6  
Fast355's Avatar
Thread Starter
Supreme Member
20 Year Member
Liked
Loved
Community Favorite
iTrader: (2)
 
Joined: Jan 2005
Posts: 10,404
Likes: 492
From: Hurst, Texas
Car: 1983 G20 Chevy
Engine: 305 TPI
Transmission: 4L60
Axle/Gears: 14 bolt with 3.07 gears
Originally Posted by rockit
holy skyscraper batman..
hey fast, a position on the A-team just opened up, you should check it out
something about a van that can 1) punch a hole through the chrysler building and 2) blow 50% of our forum away in the 1/4 just disturbs me.
I found a movie on YouTube that reminds me of my Van. I quit doing this because the darn P295/50/R17s COST TOO MUCH. Killing 700r4s and chipping ring gears have about the same appeal.

http://www.youtube.com/watch?v=hqT5p1-iBRc

This is my Van though, just a WOT stomp from a dead stop.

http://www.youtube.com/watch?v=DPIaLtE_U1I
Reply
Old Jan 12, 2007 | 11:49 PM
  #7  
1992camarors's Avatar
Member
 
Joined: Nov 2005
Posts: 202
Likes: 0
From: Van Wert, Ohio
Car: 1992 Camaro RS (Z28 Clone) Z03
Engine: 305 TBI
Transmission: 700R4
Axle/Gears: Eaton POSI/ 3.73
Sounds great! I believe you are really changing the TBI world by proving everything that has said to been impossible for tbi, is really actually possible. Well I will be along for the ride, awaiting the results on here. Good Luck!
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
hectre13
Car Audio
26
Mar 3, 2022 05:38 PM
FormulaEngland
European Region
38
Jul 17, 2016 07:33 AM
Zell1luk
TPI
0
Sep 29, 2015 10:36 AM
Vincent135
Transmissions and Drivetrain
9
Sep 28, 2015 10:50 PM
mfp189
Transmissions and Drivetrain
1
Sep 27, 2015 09:25 AM




All times are GMT -5. The time now is 01:18 AM.