hose question for TBI system
Thread Starter
Member
Joined: Nov 2003
Posts: 189
Likes: 1
From: Elkhart, IN, USA
Car: 77 K20 80 K2500 93 C2500 94 K1500
Engine: 350 350 454 350
Transmission: 350 465 80E 60E
Axle/Gears: 4.10 3.73 5.13 3.73
hose question for TBI system
would -6AN hose be big enough for the pressure line of my TBI system? also, would i hurt anything if the return line was the same size as the pressure line?
Supreme Member
Joined: Mar 2001
Posts: 6,577
Likes: 0
From: Portland, OR www.cascadecrew.org
Car: 1990 Camaro RS
Engine: Juiced 5.0 TBI - 300rwhp
Transmission: T5
Axle/Gears: 3.42 Eaton Posi, 10 Bolt
Re: hose question for TBI system
Yup, you'll be fine. I run -6AN for both feed and return. I also split a -4AN line off the feed line, for the nitrous system, I have no issues, -6AN will flow enough to support 400+ HP.
--John
--John
Thread
Thread Starter
Forum
Replies
Last Post