89 305 TBI to 350 TBI vortec
Thread Starter
Junior Member
Joined: Apr 2008
Posts: 3
Likes: 0
89 305 TBI to 350 TBI vortec
I am looking to swap my 305TBI to a 350TBI Vortec. I was told I need a new intake manifold, computer chip, and larger fuel pump. I was also told that I could put a larger cam in the Vortec. Will everything else on my stock 305 bolt to the Vortec? I am sure someone has done this swap and I would appreciate any info on exactly what I will need. Thanks
Joined: Mar 2000
Posts: 43,187
Likes: 45
From: Littleton, CO USA
Car: 82 Berlinetta/57 Bel Air
Engine: L92/LQ4 (both w/4" stroke)
Transmission: 4L80E/4L80E
Axle/Gears: 12B-3.73/9"-3.89
Welcome aboard thirdgen.org.
Yes, it's been covered. Well covered on the TBI forum, so I'll move this there.
Yes, it's been covered. Well covered on the TBI forum, so I'll move this there.
Member
Joined: Oct 2006
Posts: 320
Likes: 0
From: Allenhurst, GA
Car: '81 Z-28
Engine: Soon to be a 383
Transmission: Muncie
Axle/Gears: 3.42
Re: 89 305 TBI to 350 TBI vortec
the exhaust is restictive for a 305, so you'll want something that flows better, and you'll need a 350 tb unit, or a holley one. other than tha you are pretty well covered. gmpp makes a good manifold for the swap.
Thread
Thread Starter
Forum
Replies
Last Post
