already searched, simple tbi intake question
Thread Starter
Member
Joined: Mar 2004
Posts: 101
Likes: 1
From: Washington, Iowa
Car: 86 T/A, 86 z28, 79 berlinetta, 69 chevelle (totally rusted)
Engine: 350's in the f-bodys. 327 in the works for the T/A, MIGHT go with a 383, none in the chevelle
Transmission: T/A has a 5-speed, z28 has a 700-r4, th-350 in the 79' (5 or 6-speed soon), and none in the chevelle
already searched, simple tbi intake question
I've spent 45 minutes searching now and haven't found anything but info aobut vortecs, and tbi and porting mods.
All I need to know is can I grind out a tbi intakes center bolts to go on OLDER style heads. I know this can be done on old intakes for newer heads, but i wasn't sure if there would be enough room to get teh bolts into the intake at a different angle...IIRC that was the whole reason they changed the angle, those bolts suck on a spreadbore carb intake and the TBI intakes center area actually looks closer to the outer bolts.
All I need to know is can I grind out a tbi intakes center bolts to go on OLDER style heads. I know this can be done on old intakes for newer heads, but i wasn't sure if there would be enough room to get teh bolts into the intake at a different angle...IIRC that was the whole reason they changed the angle, those bolts suck on a spreadbore carb intake and the TBI intakes center area actually looks closer to the outer bolts.
Thread
Thread Starter
Forum
Replies
Last Post
kyle5647
Tech / General Engine
1
Aug 15, 2015 11:56 PM