305 lO3 build help
Thread Starter
Junior Member
Joined: Oct 2011
Posts: 45
Likes: 0
305 lO3 build help
I've never messed with a 3rd gen before I've just gotten one by tradeing my 00 mustang for a 91 rs auto (305/auto) Im just curious what can be done to the l03? I'm wanting to do a budget/junkyard built 305 (heads cam intake setup) I can get machine work done cheap so that isn't a problem. Currently the car has a new/rebuilt engine/trans so I don't wanna just puta 350 in it. I also live in sc so emmisions isn't a problem.
Currently the car has.
Flowmaster / new exhaust (manifolds back not cats)
Open element breather
Currently the car has.
Flowmaster / new exhaust (manifolds back not cats)
Open element breather
Oh ya, welcome to 3RDGEN...... Thread Starter
Junior Member
Joined: Oct 2011
Posts: 45
Likes: 0
Re: 305 lO3 build help
Yea I skimmed through it but didn't really see a standard build for a l03 other then people saying 'puta 350 in it' lol. But seriously I was wanting to know specificly what's a common h.c.I build? I seen lt1 cam can I run a lt1 heads with it and a eldlebrok intake? Just looking for some guidance.
Senior Member
Joined: Feb 2009
Posts: 615
Likes: 0
From: Toledo, Ohio
Car: 91' bird(WS6>>305TBI), 82'Regal
Re: 305 lO3 build help
I Haven't read any of it! Lol...... Just figured there should be some good info in there somewhere.... Hears a start. Not a sticky tho, just some general info. didn't read it all https://www.thirdgen.org/forums/tbi/...-305-adds.html This might be a start for you. I know this subject has been talked about alot here. You could also try the "search" option.......
Thread
Thread Starter
Forum
Replies
Last Post
