I'm in need for some help.

I want to build a TBI motor in my 1992 Camaro RS. I have a stock 1991 caprice TBI motor that was a cop car.

I am looking for someone that lives in jersey or someone who lives near jersey to help me. If there is no one that lives near jersey I am looking for someone to help me step by step as I build. This means help me with every info I need to build a motor. The bottom end is amazing at 63,119 miles.

If someone is okay with helping me I would like them to PM me and I would like to add them on Facebook if they have it.

 

Look in the Regional forums.

There are several east coast guys on here.

 

If that's the roller-cam 5.7 TBI engine, I have the crate-motor version in my truck.

A wonderful starting-point, especially if you can get some computer tuning to adjust for more camshaft and better heads.

The short-block except for the camshaft is well-spec'ed as-is.

 

Can also start your rebuild tread here, there are many experienced members on this bord that will help you get there.

I agree with Schurkey, if it has the flat top pistons it is a decent short block already.