When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
So I am putting an adjustable fpr on my 305 and I heard it should be at the end of the system but the return line isn’t pressurized. Can I just install a double feed to my tbi and not have a return on the tbi but have it running off of my fpr? Would this be ok
As long as you have some form of return line in your set-up you'll be fine. By dead head I mean nowhere for the excess fuel to go (return line), its just builds in the main line and makes the fuel pump work harder.
As long as you have some form of return line in your set-up you'll be fine. By dead head I mean nowhere for the excess fuel to go (return line), its just builds in the main line and makes the fuel pump work harder.
yeah I have the stock return line on the back of tbi
As long as you have some form of return line in your set-up you'll be fine. By dead head I mean nowhere for the excess fuel to go (return line), its just builds in the main line and makes the fuel pump work harder.
also the stock one in the tbi
can I just remove it and put a block plate ??
