Push button starter
Thread Starter
Supreme Member
Joined: Sep 1999
Posts: 1,054
Likes: 0
From: Ohio, USA
Car: 2015 Camaro Z/28 & 2013 Super Bee
Engine: LS7 and 392 HEMI
Push button starter
Anyone have a push button to engage their starter? My key cylinder will turn to the "on" positon but not past it to engage the starter. So I was thinking of a push button, which might be kinda cool anyway. Anyone have pics? What kit did you buy or did you make your own?
I borrowed one last weekend. Basically it just connects the wiring from the battery to the small post on the solenoid(If you use where the battery connects as 12 o'clock, the small post is at about 3 o'clock). Can't be too hard to make, just make sure the button you get and the wiring will hold up.
my iroc had one mounted under the stearing column. i have one in my 85, but it's on a switch panel with 5 other switches for the fuel, ignition, water pump, fan, and oil cooler fan... not exactily a stock set up. hell my car doesn't even have a key
Thread
Thread Starter
Forum
Replies
Last Post
RedLeader289
Tech / General Engine
10
May 28, 2019 01:47 PM





