fairbanks billet servo washer size
#1
Junior Member
Thread Starter
Join Date: Jul 2000
Location: Oshkosh WI. U.S.A
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
fairbanks billet servo washer size
I have a servo kit from fairbanks, but I,m missing part #2 from kit (large inside diameter washer). I called them and they said it was an inch and three quaters o.d.,has an i.d. of .600 and a thickness of .032 . The thickness is what I was wondering about. It seems alfully thin if anyone has one that is not yet installed could you please measure that washer and reply. thanx
------------------
85 Z28 406cid Q-jet brodix track 1 full hyd. roller 700r4 2200 stall 3.5" exhaust single adjust Konis 4 wheel disk 3.73 posi diff. 17x9.5"with 275 45s front 17x11 with 315 35s in back
------------------
85 Z28 406cid Q-jet brodix track 1 full hyd. roller 700r4 2200 stall 3.5" exhaust single adjust Konis 4 wheel disk 3.73 posi diff. 17x9.5"with 275 45s front 17x11 with 315 35s in back
Thread
Thread Starter
Forum
Replies
Last Post
Stangski09
Engine/Drivetrain/Suspension Parts for Sale
3
11-14-2015 01:27 PM
Saxondale
Exterior Parts Wanted
2
09-16-2015 06:32 AM
Saxondale
Exterior Parts Wanted
2
09-07-2015 06:11 PM