4th gen seats how much?????????? answer if you have them
My brother got leather SS's for $260 from a junk yard
------------------
86 Trans Am 355 TPI Rebuilt 700R4 with Corvette servo, modified valve body, and a B&M Torque Converter (2000 rpm stall w/ lock up), 87 350 block bored .30 with new crank, bearings, rings, and magnafluxed rods. Reworked 305 heads with 3-angle valve job. Added in the rebuild was an SLP TPI cam, BBK 58mm Throttle Body,SVO 24# injectors,MSD 6A, Hypertech Power Coil, 1.5 Crane roller tipped rocker arms, SLP Intake Runners and Port matching in upper intake including fully ported plenum, TPIS adjustable fuel pressure regulator @ 46psi, Hooker shorty style headers w/ Thermotech heat wrapping, Custom 3” exhaust with Flowmaster muffler and chrome quad tips, Hypertech Thermomaster Computer chip, K&N open element cone filter on modified MAF per TPIS specs, MSD Wires, removal of A/C hardware and a 1LE firewall cover installed. Also there has been a PST front suspension kit with Hotchkis strut tower brace
http://geocities.com/SunsetStrip/Garage/9548/kyle.html
Kills:
95 Talon TSI, 96 Probe GT, 91 T/A L98, 89 RS, 86 Mustang GT, 88 Mustang LX 5.0, 92 Thunderbird V8. couple or ricers that I think were Civics or Preludes not sure what year, 95 Celica GT-S, 94 Chevy 1/4 ton 350, one of those NASCAR F150's
------------------
86 Trans Am 355 TPI Rebuilt 700R4 with Corvette servo, modified valve body, and a B&M Torque Converter (2000 rpm stall w/ lock up), 87 350 block bored .30 with new crank, bearings, rings, and magnafluxed rods. Reworked 305 heads with 3-angle valve job. Added in the rebuild was an SLP TPI cam, BBK 58mm Throttle Body,SVO 24# injectors,MSD 6A, Hypertech Power Coil, 1.5 Crane roller tipped rocker arms, SLP Intake Runners and Port matching in upper intake including fully ported plenum, TPIS adjustable fuel pressure regulator @ 46psi, Hooker shorty style headers w/ Thermotech heat wrapping, Custom 3” exhaust with Flowmaster muffler and chrome quad tips, Hypertech Thermomaster Computer chip, K&N open element cone filter on modified MAF per TPIS specs, MSD Wires, removal of A/C hardware and a 1LE firewall cover installed. Also there has been a PST front suspension kit with Hotchkis strut tower brace
http://geocities.com/SunsetStrip/Garage/9548/kyle.html
Kills:
95 Talon TSI, 96 Probe GT, 91 T/A L98, 89 RS, 86 Mustang GT, 88 Mustang LX 5.0, 92 Thunderbird V8. couple or ricers that I think were Civics or Preludes not sure what year, 95 Celica GT-S, 94 Chevy 1/4 ton 350, one of those NASCAR F150's
Member
Joined: Apr 2000
Posts: 148
Likes: 0
From: grand haven, mi usa
Car: YTG Camaro
Engine: 383
Transmission: TH-350
does that include the back seat as well??
------------------
'84 Camaro 327ci Bored .030 over w/ 5.7" stroke. 3.73 geared Auburn Limited Slip Diff. FlowMaster Muffler w/ Shortie Headers. TH-350 Built Trany Underneath B&M Mega-Shifter. Many Engine compartment Dress Up Mods. Edelbrock High Flow Water Pump w/ Flex-a-Lite Cooling Fan.
------------------
'84 Camaro 327ci Bored .030 over w/ 5.7" stroke. 3.73 geared Auburn Limited Slip Diff. FlowMaster Muffler w/ Shortie Headers. TH-350 Built Trany Underneath B&M Mega-Shifter. Many Engine compartment Dress Up Mods. Edelbrock High Flow Water Pump w/ Flex-a-Lite Cooling Fan.
Trending Topics
I got a full set of leather 96 trans am seats for $500 shipped from some place in Mississippi. i dont remeber the number
------------------
Pino
91'Formula
LB9 305 TPI 5-speed
http://www.geocities.com/MotorCity/Garage/5654/mur91.jpg
------------------
Pino
91'Formula
LB9 305 TPI 5-speed
http://www.geocities.com/MotorCity/Garage/5654/mur91.jpg
I'd like to get a pair of TAN fronts only, but it seems like everone wants an arm and a leg for them. I'd spend 200 for the fronts, but it also seems that TAN are hard to find...especiallt cloth!
------------------
1992 Texas DPS B4C 1LE FE2 5.0/5spd:
TPIS Tricks
Intake and Plenum Ported
Fully Ported Corvette Heads
NOS FI Fuel Pump
K&N's Adj. Fuel Pressure Regulator
Alston SFC's
Energy Supension Hyperflex system
MSD 6AL
SLP 1 3/4" SS Headers
3.73's with 275/55/16's out back...blew those now 2.73 one legger
My complete back seat
encompases my RF tunes...
Currie 9" on the way with 3.70 gears
Adam
------------------
1992 Texas DPS B4C 1LE FE2 5.0/5spd:
TPIS Tricks
Intake and Plenum Ported
Fully Ported Corvette Heads
NOS FI Fuel Pump
K&N's Adj. Fuel Pressure Regulator
Alston SFC's
Energy Supension Hyperflex system
MSD 6AL
SLP 1 3/4" SS Headers
3.73's with 275/55/16's out back...blew those now 2.73 one legger
My complete back seat
encompases my RF tunes...
Currie 9" on the way with 3.70 gears
Adam
I got a set of graphite leather from a 95 formula for $500.
------------------
Drew
predatorman@hotmail.com
My Website
87 Iroc
91 Formula 14.3 @ 98mph
91 RS Convertible
92 S10
ICON Motorsports
------------------
Drew
predatorman@hotmail.com
My Website
87 Iroc
91 Formula 14.3 @ 98mph
91 RS Convertible
92 S10
ICON Motorsports
Supreme Member
iTrader: (10)
Joined: Jul 1999
Posts: 1,780
Likes: 2
From: Fla
Car: 90 IROC
Engine: 406
Transmission: GMPP 93/4L60
Axle/Gears: 9 bolt 3.27
I bought a front set of mint Graphite leather ones from 94 T/A. They have the power lumbar/sidebolsters. I paid only 200.00 i just need the rear seats to match. Anybody have a set?
I paid $100 for front and rear gray cloth from a '95 firebird at a junkyard here in south Texas. At the same junkyard, a friend of mine got some front and rear leather seats off a '95 camaro for $150. I know these prices seem very low but we're down here close to the border and parts are cheap.
------------------
Erik '89 Formula 350 TPI
14.10 @ 98 on motor
12.83 @ 109 w/NOS
http://www.geocities.com/MotorCity/Boulevard/1971/
------------------
Erik '89 Formula 350 TPI
14.10 @ 98 on motor
12.83 @ 109 w/NOS
http://www.geocities.com/MotorCity/Boulevard/1971/
I got 96 Z28 front & rear seats, grey cloth, power drivers seat for $200. Even though the upolstery is near perfect, the foam in the drivers seat was dead, presumably from the weight of the big guy I bought them from
. I had it refoamed for $75. This is best thing I have done to this car. I like to toss it around corners and these seats really keep me planted. Though they are almost identical, the refoamed seat in the Formula holds me better than the stock seat in my Z28.
------------------
87 Formula 350 14.81@91.64
98 Z28 1LE 13.15@107.59
. I had it refoamed for $75. This is best thing I have done to this car. I like to toss it around corners and these seats really keep me planted. Though they are almost identical, the refoamed seat in the Formula holds me better than the stock seat in my Z28.------------------
87 Formula 350 14.81@91.64
98 Z28 1LE 13.15@107.59
Thread
Thread Starter
Forum
Replies
Last Post









