Tech / General Engine Is your car making a strange sound or won't start? Thinking of adding power with a new combination? Need other technical information or engine specific advice? Don't see another board for your problem? Post it here!
Sponsored by:
Sponsored by: CARiD

Figured out code 36..need pigtail that does not exsist

Old Oct 16, 2000 | 09:05 AM
  #1  
Yarnboy's Avatar
Thread Starter
Member
 
Joined: Apr 2000
Posts: 307
Likes: 0
From: Frederick, MD USA
Figured out code 36..need pigtail that does not exsist

Ok, after 700 years of not knowing why I randomly get a 36, I figured it it is the pigtail that goes into the MAF. Now, you'd think this would be great news, and it should be, but it's not. The guy at Antietem auto said, and I quote, "Uh-oh..you are going to have an extremely hard time finding that part" I have the 5 pin pigtail which apparently is not manufactored anymore or something. PLEASE tell me you guys know of the Pigtail wherehouse in Maryland or something to that effect..I dont know what I should do..I don't think I really want to spend 500 bucks on a new MAF when mine is perfect so I can get a 10 dollar connector..help? Thanks alot

------------------
-Red '88 IROC 5 Speed TPI
-Dual Friction Centerforce Clutch
-Accel 300+ Racing Ignition
-Accel 300+ Pro Sleeve Plug Wires
-Accel U-Grove Plugs
-Flowmaster Force II 3 Chamber Cat Back Exhaust
-Hypertech Chip
-Hypertech Airfoil
-Removed MAF Screens
-Gutted Air Box
-Best E/T 14.90, 60 ft. 2.17, 1/8th mile 9.61(bald tires, SES light on)
-Best MPH 92.7(bald tires)
Reply
Old Oct 16, 2000 | 09:46 AM
  #2  
TomP's Avatar
Supreme Member
 
Joined: Mar 2000
Posts: 13,414
Likes: 6
From: Central NJ, USA
Car: 1986 Firebird
Engine: 2.8 V6
Transmission: 700R4
Check out a regular 'ol auto parts store... the Pep Boys ones in my corner of the world have every known GM connector hanging on a wall. Of course, the prices are high ($20-$30) for some, but if you can't find it elsewhere...


------------------
-Tom P (Hot rodded 1986 Firebird 2.8l) from http://www.f-body.net/mailbag/3rd/3rd_mailbag.html message boards
Reply
Old Oct 16, 2000 | 02:46 PM
  #3  
Yarnboy's Avatar
Thread Starter
Member
 
Joined: Apr 2000
Posts: 307
Likes: 0
From: Frederick, MD USA
No no, you dont understand..It's the gayest thing I have ever heard..I have to buy a new sensor or find a car at the junkyard that has the pigtail in good condition..the stock MAF has 4 pins..mine was replaced with an OEM that has 5 pins. They don't make the wiring harness anymore. or the pigtail. I am seriously pissed off..

------------------
-Red '88 IROC 5 Speed TPI
-Dual Friction Centerforce Clutch
-Accel 300+ Racing Ignition
-Accel 300+ Pro Sleeve Plug Wires
-Accel U-Grove Plugs
-Flowmaster Force II 3 Chamber Cat Back Exhaust
-Hypertech Chip
-Hypertech Airfoil
-Removed MAF Screens
-Gutted Air Box
-Best E/T 14.90, 60 ft. 2.17, 1/8th mile 9.61(bald tires, SES light on)
-Best MPH 92.7(bald tires)
Reply
Old Oct 16, 2000 | 03:06 PM
  #4  
IROCZZ3's Avatar
Supreme Member
 
Joined: Aug 1999
Posts: 1,053
Likes: 3
From: San Diego, CA
Car: 87 Buick GN
Engine: 3.8L (231 cid) V6
Transmission: 200-4R
Axle/Gears: 10 bolt G80/ 3.42
Try www.fuelinjection.com
I couldn't find the 2 prong pigtail connector that goes to the ignition module on my distributor with ext coil.

Dealer said it was discontinued and none of the other parts stores had this one pigtail.

I called these guys up and 18 bucks and a few days later I had one. These guys make harnesses for a living so they should be able to get you one.

------------------
1989 IROC-Z, ZZ3 shortblock with some bolt-ons.
13.20 @ 108.69, 2.2 60'
Reply
Old Oct 16, 2000 | 03:20 PM
  #5  
TomP's Avatar
Supreme Member
 
Joined: Mar 2000
Posts: 13,414
Likes: 6
From: Central NJ, USA
Car: 1986 Firebird
Engine: 2.8 V6
Transmission: 700R4
To prove my point, Pep Boys carries that 2 prong pigtail connector for the igntion coil- $22. See? I do understand.


------------------
-Tom P (Hot rodded 1986 Firebird 2.8l) from http://www.f-body.net/mailbag/3rd/3rd_mailbag.html message boards
Reply
Old Oct 16, 2000 | 04:33 PM
  #6  
maniacc's Avatar
Senior Member
 
Joined: May 2000
Posts: 672
Likes: 4
From: westland, mi
well you can call a company called Terminal Supply in Troy, Mi...they have the plug...i know this just i just got one!!! free no less...but they said it was $3.00...it's a 5-pin 280 series....

HTH....
later...

------------------
MÅN¡ÅÇ ©
88 IROC 5.7L,edelbrock TES,random tech cat,borla exhaust,chip,sfc,accel wires,airfoil,k&n's,ETC..
and soon to be supercharged
http://maniac.megamania.com
Reply
Old Oct 16, 2000 | 06:33 PM
  #7  
Vader's Avatar
Moderator
25 Year Member
Liked
Loved
Community Favorite
 
Joined: Jan 2000
Posts: 19,660
Likes: 311
I'm curious about where you got a "stock" MAF that has only four pins in the connector. The factory diagrams for the MAF distinctly show five separate connections at the MAF on an '88 TPI.

I'm confused again...

------------------
Later,
Vader
------------------
"Make Me Bad"
Adobe Acrobat Reader 4.0
Reply
Old Oct 16, 2000 | 07:24 PM
  #8  
Guest
Guest
 
Posts: n/a
The 88, and all the other MAF's used on 3rdgens have a 5pin connector, and any parts store can order or might have one in stock.
Reply
Old Oct 17, 2000 | 01:30 PM
  #9  
Yarnboy's Avatar
Thread Starter
Member
 
Joined: Apr 2000
Posts: 307
Likes: 0
From: Frederick, MD USA
The fart at the dealer said they were 4. I have no idea..just going by the mean over paid man. I am gonna click on all the links you guys gave me..thanks alot!

------------------
-Red '88 IROC 5 Speed TPI
-Dual Friction Centerforce Clutch
-Accel 300+ Racing Ignition
-Accel 300+ Pro Sleeve Plug Wires
-Accel U-Grove Plugs
-Flowmaster Force II 3 Chamber Cat Back Exhaust
-Hypertech Chip
-Hypertech Airfoil
-Removed MAF Screens
-Gutted Air Box
-Best E/T 14.90, 60 ft. 2.17, 1/8th mile 9.61(bald tires, SES light on)
-Best MPH 92.7(bald tires)
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
db057
TBI
14
Apr 28, 2019 07:45 AM
tglennon11
Electronics
10
Sep 23, 2015 05:30 PM
Ian Irvine
Engine/Drivetrain/Suspension Parts for Sale
0
Sep 4, 2015 08:08 AM
Slush92RS
LTX and LSX
3
Sep 2, 2015 08:56 PM
RyanJB
TPI
0
Sep 2, 2015 01:27 PM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 02:56 PM.