Vortec heads, Which intake?
Thread Starter
Junior Member
Joined: Aug 2003
Posts: 3
Likes: 0
From: Canada
Vortec heads, Which intake?
I Have a 406 with vortec heads cam, exhaust, the whole bit
I was told that this TPI set up wont give me enough flow for the
C.I.D i have.
I already bought the Scoggin Dickey lower intake for the stock TPI unit and would like to try and stay with that lower piece.
Which intake would give the the best performance without changing my entire setup?
I was told that this TPI set up wont give me enough flow for the
C.I.D i have.
I already bought the Scoggin Dickey lower intake for the stock TPI unit and would like to try and stay with that lower piece.
Which intake would give the the best performance without changing my entire setup?
Joined: Mar 2000
Posts: 43,187
Likes: 45
From: Littleton, CO USA
Car: 82 Berlinetta/57 Bel Air
Engine: L92/LQ4 (both w/4" stroke)
Transmission: 4L80E/4L80E
Axle/Gears: 12B-3.73/9"-3.89
The best would be the TPIS Miniram Vortec.
But, you want to keep what you've got. So, TPIS, SLP, or Edelbrock runners, ported plenum, 58mm TB, and 24 lb injectors with AFPR. Converted to SD, PROM tuning.
But, you want to keep what you've got. So, TPIS, SLP, or Edelbrock runners, ported plenum, 58mm TB, and 24 lb injectors with AFPR. Converted to SD, PROM tuning.
Thread
Thread Starter
Forum
Replies
Last Post
84z96L31vortec
Tech / General Engine
7
Aug 20, 2017 12:16 AM
L98GTA87
Engine/Drivetrain/Suspension Wanted
1
Aug 11, 2015 06:55 PM
84z96L31vortec
North East Region
1
Aug 10, 2015 08:27 PM