Does anyone have any of these .cam cam specification files? In particular I'm looking for the stock TBI cam, LT4 cam, and the "Hot Cam". Any comments on the accuracy of this program are welcome too...
(I hope this thread is ok for this board)

-Mark W.
'88 SC Camaro w/ 305 TBI

 

http://www.vbe.com/~shadow/dyno2000.htm

There's another link at the bottom of that page with more files. Check www.nethirdgen.org in the general forum too, there's a couple threads on this.

------------------
1991 Camaro Z28
5.7L 5-Speed (originally 305)
13.25 @ 107.18 MPH
Southern California
Member: SoCal 3rd Gen F-Bodies
Webmaster: SoCal F-Bodies
-=ICON Motorsports=-

 

Thanks alot, that's good stuff. I can't find the "hot cam" on there though. I know somebody has one of these in their engine and surely somebody has the cam spec card for it. If you do, and you read this, the only specs I need are the Intake and exhaust valve opening and closing numbers.

-Mark W.
'88 SC Camaro w/ 305 TBI

 

hows about does anyone have LG4 with peanut cam files ? I'd like to start with the stock setup and keep adding to see the results - without going through the full specs manually ???


ciao

------------------
gruNT
near stock 86 LG4 WS6 T/A
Brisbane Australia
http://web.one.net.au/~grunt

 

LT4 hot cam spec:
Duration at lash: 279/287
Duration at .050: 218/228
Lift wt 1.6 rr: .525/.525
LSA: 112*

------------------
Bob '89 Formula CC350
Last(lost)Member of the Elusive Great Lakes Crew
My car's homepage

 

would anyone be willing to send me a copy of Desktop Dyno? I'd like to have it, but I don't have the money for it.

Thanks,
Brandon